T6000 RC AND PC

MAKING IT EASIER TO WORK WITH FRONT MOUNTED IMPLEMENTS

New Holland T6000 tractors are designed to incorporate a fully integrated, factory fitted front linkage and PTO. Automated HTS works with both the front and rear systems, and combined with rear Auto PTO, make it so much simpler to carry out multiple tasks with front and rear mounted equipment. The linkage arms fold up when not in use or can be used to carry the full standard weight pack.

AUTO PTO. DOES EXACTLY WHAT IS SAYS

Engaging and disengaging the PTO at the right time as the rear linkage is lowered can be critical; get the timing wrong, and the PTO shaft may be damaged. Auto PTO can be set to automatically engage and disengage drive to the PTO. Once set, it will use the position of the rear linkage to manage the PTO drive. Engagement is fully modulated to protect both tractor and implement. On SideWinder II tractors PTO settings for your implements are easily stored on the IntelliView III touch screen

HEADLAND TURN SEQUENCING

Automated features are only of use when the operator feels comfortable setting them up and using them. New Holland Headland Turn Sequencing has been refined and developed over several years to match ease of operation with in-field efficiency. The system allows the operator to record and store the sequence of operations at the headland. These are then ‘played back’ automatically when HTS is activated. Simple and a great way to reduce fatigue over extended working periods.

STRONG, EFFICIENT AND POWERFUL

Measured at 610mm from the ball ends, the Cat III rear linkage has a continuous lift capacity of 6616kg. Rated at a massive 8257kg, the rear linkage and hydraulics are designed to work with heavy mounted equipment over extended periods. The system also incorporates integral dynamic ride control shock load protection. This will reduce bounce when travelling with a heavy linkage load at transport speeds.