Hydraulics & Hitch

MORE FLOW, MORE CHOICES

Quick response and ample oil flow are part of the design of the T7 Series hydraulic system. You have the capacity, control and flexibility to perform multiple hydraulic functions simultaneously—without sacrificing performance.


Read More

TWO-PUMP CCLS SYSTEM

T7 Series hydraulic performance starts with the closed-center load-sensing (CCLS) system powered by a variable displacement piston pump, delivering 33 gallons per minute for the rear remotes, three-point hitch and loader on all models. An optional high-flow pump provides 39 GPM on models T7.235 - T7.270 and 37 GPM on models T7.100 - T7.210. All models include a separate pump for operating circuits.


Read More

UP TO FIVE ELECTROHYDRAULIC REMOTES

Electrohydraulic remote valves, which allow you to control flow rate and timing electronically from the cab, are standard equipment on all models with the Auto Command™ CVT transmission or the deluxe cab, and optional on models with the Power Command™ transmission. Three electrohydraulic remotes are standard with two more available. Switches on both fenders are included for external control of the third rear remote.


Read More

MECHANICAL REAR REMOTE VALVES

These valves feature configurable detents and mechanical flow adjustment. Three mechanical remotes are standard with a fourth that can be requested from the factory or installed by your dealer.


Read More

REMARKABLE LIFT CAPACITY

Three-point hitch capacity for T7 Series tractors is an outstanding 15,873 lbs for T7.250, T7.260 and T7.270, and 12,787 lbs for the T7.235 model (all measurements are ASAE @ 24 inches). That means you can save time with larger, wider three-point-mounted implements that cover more acres with every pass.


Read More

EASY HOOKUP

Flex link ends and a turnbuckle height adjustment make hookup a breeze. And, a fast raise/ lower switch is provided in the cab and on both rear fenders. Standard Dynamic Ride Control™ helps prevent three-point-mounted implements from "bouncing" on the rear hitch during transport. You enjoy greater steering control, added safety and a smooth, comfortable ride.


Read More

PRECISE DRAFT CONTROL

Electronic draft control allows for precise, automatic control of three-point-mounted implements, using lower link draft sensing to maintain a constant load on the hitch through changing soil conditions.


Read More

SOFT START PTO

The T7 Series PTO is electrohydraulically engaged for smooth starts, and the standard Soft Start feature provides added implement protection. A PTO 'coast down' switch allows you to manually override the PTO brake to control high-inertia loads. An exterior PTO switch on each of the rear fenders makes the PTO shaft easier to hook up.


Read More

NEW PTO OPTIONS

A 540/1000 rpm PTO shaft is standard equipment on all T7 Series tractors; on T7.235 thru T7.270 models economy PTO options are available. The 1000/1000E rpm PTO controls speed selection electronically. In the 1000E mode, the 1000-rpm PTO speed is achieved at a low 1700-rpm engine speed for improved fuel efficiency.


Read More

TIME-SAVING AUTO PTO

Another bonus on T7 Series tractors with electrohydraulic rear remotes is automatic PTO engagement and disengagement when you use the quick raise/lower switch.


Read More
social stream
Top Service:


New Holland Agriculture © 2015
back to top