Skid Steer Loaders

BUILT AROUND YOU

Gallery

Promotions

0.9% for 60 Months OR Cash Back

 

Enter your zip or postal code below to get this offer


MODELS

L213

Rated Operating Capacity1,300 lbs (590 kg)
Gross Horsepower49 hp (36 kW)
Operating Weight5,070 lbs (2300 kg)


Standard  Optional 
L213
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)141.4 (3591)
Overall operating height with low profile/standard lip bucket, in (mm)146.9 (3732)
Overall operating height with low profile extended/long lip bucket, in (mm)152 (3859)
Height to Bucket hinge pin, in (mm)112 (2845)
Height to Top of ROPS, in (mm)75.5 (1919)
Height to Bottom of level bucket, fully raised, in (mm)105.6 (2682)
Overall length without attachment with coupler, in (mm)95.9 (2435)
Overall length with foundry excavation bucket on ground, in (mm)119.2 (3028)
Overall length with low profile bucket, in (mm)125 (3175)
Overall length with low profile extended bucket, in (mm)129.8 (3297)
Dump angle, degrees40
Dump height with foundry/excavating bucket short lip, in (mm).88.4 (2246)
Dump height with low profile/standard lip bucket, in (mm).84.8 (2154)
Dump reach (max height), in (mm)18.5 (469)
Maximum attachment rollback - Bucket on ground, degrees26
Maximum attachment rollback - Bucket at full height, degrees95
Wheelbase, in (mm)37 (941)
Ground clearance (bottom of belly pan), in (mm)7 (178)
Angle of departure, degrees22
Clearance circle without bucket, in (mm)48.7 (1237)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)73.3 (1862)
Clearance circle with 60” inch low profile bucket on ground, in (mm)78.5 (1994)
Clearance circle with 60” inch extended low profile on ground, in (mm)83.1 (2112)
Clearance circle with foundry bucket in carry position, in (mm)NA
Clearance circle with low profile bucket on ground, in (mm)NA
Clearance circle with extended low profile on ground, in (mm)NA
Clearance circle rear, in (mm)56.4 (1433)
Rear axle to bumper, in (mm)33.8 (858)
Tread width, in (mm)49.2 (1248) with 10” x 16.5” tires
Overall width, in (mm)59.8 (1518)
Engine
Manufacturer/modelISM / N844L
TypeDiesel 4-stroke, I.D.I.
Cylinder4
Bore/stroke, in (mm)3.31 x 3.94 (84 x 100)
Displacement, in³ (L)135.2 (2.216)
Fuel injectionIndirect
Fuel#2 diesel
Fuel filterPre-filter spin on @ 14 microns - Main-filter spin on @ 10 microns
Air intakeNaturally aspirated
CoolingLiquid
Engine speed High idle - no load, rpm2825 +/- 25
Engine speed Rated - full load, rpm2800
Engine speed Low idle, rpm1200 +/-50
Horsepower per SAE J1349: Gross hp (kW)49 (36) @ 2800 rpm
Horsepower per SAE J1349: Net hp (kW)46 (34) @ 2800 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)105.5 (143) @ 1800 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)2.14 (35)
Drive pump mechanical - Flow, gpm (Lpm)25.1 (95)
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)NA
Drive pump mechanical - Charge pressure, psi (bar)360 (25)
Drive pump mechanical - System relief, psi (bar)5000 (345)
Drive pump mechanical - ControlDirect mechanical or Electro Hydraulic
Drive pump electro hydraulic - Pump to engine ratioNA
Drive pump electro hydraulic - Displacement, in³ (cc)NA
Drive pump electro hydraulic - Flow, gpm (Lpm)NA
Drive pump electro hydraulic - Charge pressure, psi (bar)NA
Drive pump electro hydraulic - System relief, psi (bar)NA
Drive pump electro hydraulic - ControlNA
Drive motors - Max displacement, in³ (cc)19.83 (325)
Drive motors - Speed @ high idle engine rpm313
Drive motors - Speed @ optional high speed, rpmNA
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1315 (1783)
Travel speed with spec tires - Low range, mph (km/h)7.4 (11.9)
Travel speed with spec tires - High range (optional), mph (km/h)NA
Final driveSingle-reduction chain drive
Drive chain sizeASA #80
Axles - Diameter, in (mm)2 (50.8)
Axles - Length, in (mm)13.2 (346)
Parking brake typeSpring applied, hydraulic release multiple disk
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)1.45 (23.8)
Pumps - Displacement high flow aux., in³ (cc)NA
Pumps - Flow, gpm (Lpm)17.5 (66.2)
Pumps - Optional high flow, gpm (Lpm)NA
Loader control valve type3 Spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.25 (57)
Lift cylinder - Rod diameter, in (mm)1.38 (35)
Lift cylinder - Stroke, in (mm)25.4 (645)
Lift cylinder - Closed length, in (mm)38.9 (989)
Bucket cylinders - Bore diameter, in (mm)2.25 (57)
Bucket cylinders - Rod diameter, in (mm)1.25 (32)
Bucket cylinders - Stroke, in (mm)14.6 (370)
Bucket cylinders - Closed length, in (mm)23.4 (594)
Weights
Operating weight, lbs (kg)5070 (2300)
Shipping weight, lbs (kg)4770 (2160)
Service Capacities
Fuel tank, gal (L)16 (60.5)
Engine oil with filter, qt (L)7.5 (7.1)
Hydraulic system: System capacity with filter, qt (L)30.9 (29.2)
Hydraulic system: Chain tanks (per side), qt (L)6.6 (6.25)
Rated operating load 50% tip, lbs (kg)1300 (590)
Rated operating load Tipping load, lbs (kg)2600 (1179)
Breakout forces: Lift cylinder, lbs (kN)2850 (12.7) Tip Limit
Breakout forces: Bucket cylinder, lbs (kN)4180 (18.6)
Cycle times - Raise, sec3.2
Cycle times - Lower, sec2.0
Cycle times - Dump, sec1.8
Cycle times - Roll back, sec1.3

L216

Rated Operating Capacity1,500 lbs (680 kg)
Gross Horsepower60 hp (45 kW)
Operating Weight5,370 lbs (2436 kg)


Standard  Optional 
L216
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)141.4 (3591)
Overall operating height with low profile/standard lip bucket, in (mm)146.9 (3732)
Overall operating height with low profile extended/long lip bucket, in (mm)152 (3859)
Height to Bucket hinge pin, in (mm)112 (2845)
Height to Top of ROPS, in (mm)75.5 (1919)
Height to Bottom of level bucket, fully raised, in (mm)105.6 (2682)
Overall length without attachment with coupler, in (mm)95.9 (2435)
Overall length with foundry excavation bucket on ground, in (mm)119.2 (3028)
Overall length with low profile bucket, in (mm)125 (3175)
Overall length with low profile extended bucket, in (mm)129.8 (3297)
Dump angle, degrees40
Dump height with foundry/excavating bucket short lip, in (mm).88.4 (2246)
Dump height with low profile/standard lip bucket, in (mm).84.8 (2154)
Dump reach (max height), in (mm)18.5 (469)
Maximum attachment rollback - Bucket on ground, degrees26
Maximum attachment rollback - Bucket at full height, degrees95
Wheelbase, in (mm)37 (941)
Ground clearance (bottom of belly pan), in (mm)7 (178)
Angle of departure, degrees22
Clearance circle without bucket, in (mm)48.7 (1237)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)73.3 (1862)
Clearance circle with 60” inch low profile bucket on ground, in (mm)78.5 (1994)
Clearance circle with 60” inch extended low profile on ground, in (mm)83.1 (2112)
Clearance circle with foundry bucket in carry position, in (mm)NA
Clearance circle with low profile bucket on ground, in (mm)NA
Clearance circle with extended low profile on ground, in (mm)NA
Clearance circle rear, in (mm)56.4 (1433)
Rear axle to bumper, in (mm)33.8 (858)
Tread width, in (mm)49.2 (1248) with 10” x 16.5” tires
Overall width, in (mm)59.8 (1518)
Engine
Manufacturer/modelISM / N844LT
TypeDiesel 4-stroke, T, I.D.I.
Cylinder4
Bore/stroke, in (mm)3.31 x 3.94 (84 x 100)
Displacement, in³ (L)135.2 (2.216)
Fuel injectionIndirect
Fuel#2 diesel
Fuel filterPre-filter spin on @ 14 microns - Main-filter spin on @ 10 microns
Air intakeTurbocharged with external EGR
CoolingLiquid
Engine speed High idle - no load, rpm2825 +/- 25
Engine speed Rated - full load, rpm2800
Engine speed Low idle, rpm1200 +/-50
Horsepower per SAE J1349: Gross hp (kW)60 (45) @ 2800 rpm
Horsepower per SAE J1349: Net hp (kW)57 (42) @ 2800 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)139 (188) @ 1800 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)2.14 (35)
Drive pump mechanical - Flow, gpm (Lpm)25.1 (95)
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)NA
Drive pump mechanical - Charge pressure, psi (bar)360 (25)
Drive pump mechanical - System relief, psi (bar)5000 (345)
Drive pump mechanical - ControlDirect mechanical or Electro Hydraulic
Drive pump electro hydraulic - Pump to engine ratioNA
Drive pump electro hydraulic - Displacement, in³ (cc)NA
Drive pump electro hydraulic - Flow, gpm (Lpm)NA
Drive pump electro hydraulic - Charge pressure, psi (bar)NA
Drive pump electro hydraulic - System relief, psi (bar)NA
Drive pump electro hydraulic - ControlNA
Drive motors - Max displacement, in³ (cc)19.83 (325)
Drive motors - Speed @ high idle engine rpm313
Drive motors - Speed @ optional high speed, rpmNA
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1315 (1783)
Travel speed with spec tires - Low range, mph (km/h)7.4 (11.9)
Travel speed with spec tires - High range (optional), mph (km/h)NA
Final driveSingle-reduction chain drive
Drive chain sizeASA #80
Axles - Diameter, in (mm)2 (50.8)
Axles - Length, in (mm)13.2 (346)
Parking brake typeSpring applied, hydraulic release multiple disk
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)1.52 (24.9)
Pumps - Displacement high flow aux., in³ (cc)NA
Pumps - Flow, gpm (Lpm)18.4 (69.7)
Pumps - Optional high flow, gpm (Lpm)NA
Loader control valve type3 Spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.25 (57)
Lift cylinder - Rod diameter, in (mm)1.38 (35)
Lift cylinder - Stroke, in (mm)25.4 (645)
Lift cylinder - Closed length, in (mm)38.9 (989)
Bucket cylinders - Bore diameter, in (mm)2.5 (63.5)
Bucket cylinders - Rod diameter, in (mm)1.38 (34.9)
Bucket cylinders - Stroke, in (mm)14.6 (370)
Bucket cylinders - Closed length, in (mm)23.4 (594)
Weights
Operating weight, lbs (kg)5510 (2505)
Shipping weight, lbs (kg)5210 (2370)
Service Capacities
Fuel tank, gal (L)16 (60.5)
Engine oil with filter, qt (L)7.5 (7.1)
Hydraulic system: System capacity with filter, qt (L)30.9 (29.2)
Hydraulic system: Chain tanks (per side), qt (L)6.6 (6.25)
Rated operating load 50% tip, lbs (kg)1600 (725)
Rated operating load Tipping load, lbs (kg)3200 (1455)
Breakout forces: Lift cylinder, lbs (kN)3310 (14.7) Tip Limit
Breakout forces: Bucket cylinder, lbs (kN)5270 (23.4)
Cycle times - Raise, sec3.2
Cycle times - Lower, sec2.0
Cycle times - Dump, sec1.8
Cycle times - Roll back, sec1.3

L218

Rated Operating Capacity1,800 lbs (818 kg)
Gross Horsepower60 hp (45 kW)
Operating Weight5,930 lbs (2690 kg)


Standard  Optional 
L218
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)150.4 (3820)
Overall operating height with low profile/standard lip bucket, in (mm)154.6 (3927)
Overall operating height with low profile extended/long lip bucket, in (mm)159.6 (4055)
Height to Bucket hinge pin, in (mm)120 (3048)
Height to Top of ROPS, in (mm)77.7 (1974)
Height to Bottom of level bucket, fully raised, in (mm)113.3 (2877)
Overall length without attachment with coupler, in (mm)105.7 (2697)
Overall length with foundry excavation bucket on ground, in (mm)131.9 (3352)
Overall length with low profile bucket, in (mm)136.1 (3456)
Overall length with low profile extended bucket, in (mm)141.1 (3585)
Dump angle, degrees52
Dump height with foundry/excavating bucket short lip, in (mm).93.7 (2380)
Dump height with low profile/standard lip bucket, in (mm).90.7 (2305)
Dump reach (max height), in (mm)30.8 (783)
Maximum attachment rollback - Bucket on ground, degrees35
Maximum attachment rollback - Bucket at full height, degrees88
Wheelbase, in (mm)44.4 (1128)
Ground clearance (bottom of belly pan), in (mm)7 (178)
Angle of departure, degrees23
Clearance circle without bucket, in (mm)50.7 (1289)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)NA
Clearance circle with 60” inch low profile bucket on ground, in (mm)NA
Clearance circle with 60” inch extended low profile on ground, in (mm)NA
Clearance circle with foundry bucket in carry position, in (mm)79.6 (2021) with 66” bucket
Clearance circle with low profile bucket on ground, in (mm)83.9 (2132) with 66” bucket
Clearance circle with extended low profile on ground, in (mm)88.6 (2250) with 66” bucket
Clearance circle rear, in (mm)62.9 (1599)
Rear axle to bumper, in (mm)36.4 (924)
Tread width, in (mm)53.9 (1371) with 10” x 16.5” tires
Overall width, in (mm)66.1 (1678)
Engine
Manufacturer/modelISM / N844LTA
TypeDiesel 4-stroke, Turbo, D.I.
Cylinder4
Bore/stroke, in (mm)3.31 x 3.94 (84 x 100)
Displacement, in³ (L)135 (2.2)
Fuel injectionHPCR Direct
Fuel#2 diesel
Fuel filterPre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intakeTurbocharged Aftercooled with external EGR
CoolingLiquid
Engine speed High idle - no load, rpm2825 +/- 25
Engine speed Rated - full load, rpm2800
Engine speed Low idle, rpm1200 +/- 50
Horsepower per SAE J1349: Gross hp (kW)60 (45) @ 2800 rpm
Horsepower per SAE J1349: Net hp (kW)57 (42) @ 2800 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)135 (183) @ 1800 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)2.14 (35)
Drive pump mechanical - Flow, gpm (Lpm)NA
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)25.1 (95)
Drive pump mechanical - Charge pressure, psi (bar)360 (24.5 )
Drive pump mechanical - System relief, psi (bar)5000 (345)
Drive pump mechanical - ControlDirect mechanical
Drive pump electro hydraulic - Pump to engine ratio1:1
Drive pump electro hydraulic - Displacement, in³ (cc)2.14 (35)
Drive pump electro hydraulic - Flow, gpm (Lpm)25.1 (95)
Drive pump electro hydraulic - Charge pressure, psi (bar)362 (25)
Drive pump electro hydraulic - System relief, psi (bar)5220 (360)
Drive pump electro hydraulic - ControlElectro hydraulic
Drive motors - Max displacement, in³ (cc)19.83 (325)
Drive motors - Speed @ high idle engine rpm313
Drive motors - Speed @ optional high speed, rpm443
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1315 (1783)
Travel speed with spec tires - Low range, mph (km/h)7.4 (11.9)
Travel speed with spec tires - High range (optional), mph (km/h)10.8 (17.4)
Final driveSingle-reduction chain drive
Drive chain sizeASA #80
Axles - Diameter, in (mm)2 (50.8)
Axles - Length, in (mm)15.1 (384)
Parking brake typeSpring applied, hydraulic release disc
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)1.7 (27.8)
Pumps - Displacement high flow aux., in³ (cc)0.84 (13.8)
Pumps - Flow, gpm (Lpm)20.6 (78)
Pumps - Optional high flow, gpm (Lpm)30.7 (116.2)
Loader control valve type3 spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.25 (57)
Lift cylinder - Rod diameter, in (mm)1.38 (34.9)
Lift cylinder - Stroke, in (mm)26.8 (681)
Lift cylinder - Closed length, in (mm)38.7 (982)
Bucket cylinders - Bore diameter, in (mm)2.5 (63.5)
Bucket cylinders - Rod diameter, in (mm)1.38 (34.9)
Bucket cylinders - Stroke, in (mm)16.1 (410)
Bucket cylinders - Closed length, in (mm)24 (610)
Weights
Operating weight, lbs (kg)5930 (2690)
Shipping weight, lbs (kg)5630 (2550)
Service Capacities
Fuel tank, gal (L)19.5 (73.8)
Engine oil with filter, qt (L)7.5 (7.1)
Hydraulic system: System capacity with filter, qt (L)34 (32.2)
Hydraulic system: Chain tanks (per side), qt (L)7.9 (7.4)
Rated operating load 50% tip, lbs (kg)1800 (818)
Rated operating load Tipping load, lbs (kg)3600 (1633)
Breakout forces: Lift cylinder, lbs (kN)2620 (11.7)
Breakout forces: Bucket cylinder, lbs (kN)5550 (24.7)
Cycle times - Raise, sec2.8
Cycle times - Lower, sec2.3
Cycle times - Dump, sec2.1
Cycle times - Roll back, sec1.5

L220

Rated Operating Capacity2,000 lbs (905 kg)
Gross Horsepower67 hp (50 kW)
Operating Weight6,470 lbs (2935 kg)


Standard  Optional 
L220
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)151.4 (3845)
Overall operating height with low profile/standard lip bucket, in (mm)155.6 (3952)
Overall operating height with low profile extended/long lip bucket, in (mm)160.6 (4080)
Height to Bucket hinge pin, in (mm)121 (3073)
Height to Top of ROPS, in (mm)78.7 (1998)
Height to Bottom of level bucket, fully raised, in (mm)114.3 (2902)
Overall length without attachment with coupler, in (mm)105.7 (2697)
Overall length with foundry excavation bucket on ground, in (mm)131.4 (3338)
Overall length with low profile bucket, in (mm)135.4 (3440)
Overall length with low profile extended bucket, in (mm)140.5 (3569)
Dump angle, degrees52
Dump height with foundry/excavating bucket short lip, in (mm).94.5 (2402)
Dump height with low profile/standard lip bucket, in (mm).91.7 (2330)
Dump reach (max height), in (mm)29.8 (758)
Maximum attachment rollback - Bucket on ground, degrees34
Maximum attachment rollback - Bucket at full height, degrees88
Wheelbase, in (mm)44.4 (1128)
Ground clearance (bottom of belly pan), in (mm)8 (203)
Angle of departure, degrees25
Clearance circle without bucket, in (mm)50.7 (1289)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)NA
Clearance circle with 60” inch low profile bucket on ground, in (mm)NA
Clearance circle with 60” inch extended low profile on ground, in (mm)NA
Clearance circle with foundry bucket in carry position, in (mm)80.9 (2055) with 72” bucket
Clearance circle with low profile bucket on ground, in (mm)84.6 (2150) with 72” bucket
Clearance circle with extended low profile on ground, in (mm)89.3 (2268) with 72” bucket
Clearance circle rear, in (mm)62.9 (1599)
Rear axle to bumper, in (mm)36.4 (924)
Tread width, in (mm)56.9 (1448) with 12” x 16.5” tires
Overall width, in (mm)69.1 (1755)
Engine
Manufacturer/modelISM / N844LTA
TypeDiesel 4-stroke, Turbo, D.I.
Cylinder4
Bore/stroke, in (mm)3.31 x 3.94 (84 x 100)
Displacement, in³ (L)135 (2.2)
Fuel injectionHPCR Direct
Fuel#2 diesel
Fuel filterPre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intakeTurbocharged Aftercooled with external EGR
CoolingLiquid
Engine speed High idle - no load, rpm2825 +/- 25
Engine speed Rated - full load, rpm2800
Engine speed Low idle, rpm1200 +/- 50
Horsepower per SAE J1349: Gross hp (kW)67 (50) @ 2800 rpm
Horsepower per SAE J1349: Net hp (kW)64 (47.7) @ 2800 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)153 (208) @ 1800 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)2.14 (35)
Drive pump mechanical - Flow, gpm (Lpm)NA
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)25.1 (95)
Drive pump mechanical - Charge pressure, psi (bar)360 (24.5 )
Drive pump mechanical - System relief, psi (bar)5000 (345)
Drive pump mechanical - ControlDirect mechanical
Drive pump electro hydraulic - Pump to engine ratio1:1
Drive pump electro hydraulic - Displacement, in³ (cc)2.14 (35)
Drive pump electro hydraulic - Flow, gpm (Lpm)25.1 (95)
Drive pump electro hydraulic - Charge pressure, psi (bar)362 (25)
Drive pump electro hydraulic - System relief, psi (bar)5220 (360)
Drive pump electro hydraulic - ControlElectro hydraulic
Drive motors - Max displacement, in³ (cc)19.83 (325)
Drive motors - Speed @ high idle engine rpm313
Drive motors - Speed @ optional high speed, rpm443
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1315 (1783)
Travel speed with spec tires - Low range, mph (km/h)7.8 (12.5)
Travel speed with spec tires - High range (optional), mph (km/h)11.4 (18.3)
Final driveSingle-reduction chain drive
Drive chain sizeASA #80
Axles - Diameter, in (mm)2 (50.8)
Axles - Length, in (mm)15.1 (384)
Parking brake typeSpring applied, hydraulic release disc
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)1.7 (27.8)
Pumps - Displacement high flow aux., in³ (cc)0.84 (13.8)
Pumps - Flow, gpm (Lpm)20.6 (78)
Pumps - Optional high flow, gpm (Lpm)30.7 (116.2)
Loader control valve type3 spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.5 (63.5)
Lift cylinder - Rod diameter, in (mm)1.75 (44.45)
Lift cylinder - Stroke, in (mm)26.8 (681)
Lift cylinder - Closed length, in (mm)38.7 (982)
Bucket cylinders - Bore diameter, in (mm)2.75 (69.9)
Bucket cylinders - Rod diameter, in (mm)1.38 (34.9)
Bucket cylinders - Stroke, in (mm)16.1 (410)
Bucket cylinders - Closed length, in (mm)24 (610)
Weights
Operating weight, lbs (kg)6470 (2930)
Shipping weight, lbs (kg)6170 (2795)
Service Capacities
Fuel tank, gal (L)25.5 (96.5)
Engine oil with filter, qt (L)7.5 (7.1)
Hydraulic system: System capacity with filter, qt (L)34 (32.2)
Hydraulic system: Chain tanks (per side), qt (L)7.9 (7.4)
Rated operating load 50% tip, lbs (kg)2000 (905)
Rated operating load Tipping load, lbs (kg)4000 (1814)
Breakout forces: Lift cylinder, lbs (kN)3450 (15.3)
Breakout forces: Bucket cylinder, lbs (kN)7300 (32.5)
Cycle times - Raise, sec3.5
Cycle times - Lower, sec2.3
Cycle times - Dump, sec2.6
Cycle times - Roll back, sec2.0

L221

Rated Operating Capacity2,100 lbs (905 kg)
Gross Horsepower74 hp (55 kW)
Operating Weight6,970 lbs (3,160 kg)


Standard  Optional 
L221
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)154.3 (3920)
Overall operating height with low profile/standard lip bucket, in (mm)158.3 (4050)
Overall operating height with low profile extended/long lip bucket, in (mm)163.2 (4146)
Height to Bucket hinge pin, in (mm)123 (3124)
Height to Top of ROPS, in (mm)78.7 (1998)
Height to Bottom of level bucket, fully raised, in (mm)116.1 (2950)
Overall length without attachment with coupler, in (mm)105.1 (2669)
Overall length with foundry excavation bucket on ground, in (mm)129.6 (3292)
Overall length with low profile bucket, in (mm)133.7 (3397)
Overall length with low profile extended bucket, in (mm)138.8 (3525)
Dump angle, degrees40
Dump height with foundry/excavating bucket short lip, in (mm).98.2 (2495)
Dump height with low profile/standard lip bucket, in (mm).95.6 (2428)
Dump reach (max height), in (mm)20.3 (517)
Maximum attachment rollback - Bucket on ground, degrees31
Maximum attachment rollback - Bucket at full height, degrees99
Wheelbase, in (mm)44.4 (1128)
Ground clearance (bottom of belly pan), in (mm)8 (203)
Angle of departure, degrees25
Clearance circle without bucket, in (mm)50.7 (1289)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)79.9 (2031)
Clearance circle with 60” inch low profile bucket on ground, in (mm)83.1 (2112)
Clearance circle with 60” inch extended low profile on ground, in (mm)87.7 (2228)
Clearance circle with foundry bucket in carry position, in (mm)NA
Clearance circle with low profile bucket on ground, in (mm)NA
Clearance circle with extended low profile on ground, in (mm)NA
Clearance circle rear, in (mm)62.9 (1599)
Rear axle to bumper, in (mm)36.4 (924)
Tread width, in (mm)56.9(1448) with 12"x16.5" tires
Overall width, in (mm)69.1 (1755)
Engine
Manufacturer/modelFPT/F5H FL463
TypeDiesel 4-stroke, Turbo, D.I.
Cylinder4
Bore/stroke, in (mm)3.9x4.3 (99x110)
Displacement, in³ (L)207 (3.4)
Fuel injectionHPCR Direct
Fuel#2 diesel
Fuel filterPre-spin on 30 microns - Main-spin on 4 microns
Air intakeTurbocharged with CEGR external
CoolingLiquid
Engine speed High idle - no load, rpm2500 +/-25
Engine speed Rated - full load, rpm2500
Engine speed Low idle, rpm1150 +/-25
Horsepower per SAE J1349: Gross hp (kW)74 (55) @2500 rpm
Horsepower per SAE J1349: Net hp (kW)68 (51) @ 2500 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)232 (314) @ 1400 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)2.81 (46)
Drive pump mechanical - Flow, gpm (Lpm)29.4 (111)
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)NA
Drive pump mechanical - Charge pressure, psi (bar)360 +/-10 (24.5 +/-0.5)
Drive pump mechanical - System relief, psi (bar)5220 (360)
Drive pump mechanical - ControlDirect mechanical or Electro Hydraulic
Drive pump electro hydraulic - Pump to engine ratioNA
Drive pump electro hydraulic - Displacement, in³ (cc)NA
Drive pump electro hydraulic - Flow, gpm (Lpm)NA
Drive pump electro hydraulic - Charge pressure, psi (bar)NA
Drive pump electro hydraulic - System relief, psi (bar)NA
Drive pump electro hydraulic - ControlNA
Drive motors - Max displacement, in³ (cc)28.7 (470)
Drive motors - Speed @ high idle engine rpm241
Drive motors - Speed @ optional high speed, rpmNA
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1987 (2694)
Travel speed with spec tires - Low range, mph (km/h)7.8 (12.5)
Travel speed with spec tires - High range (optional), mph (km/h)NA
Final driveSingle-reduction chain drive
Drive chain sizeASA #100
Axles - Diameter, in (mm)2.44 (61.9)
Axles - Length, in (mm)15.7 (399)
Parking brake typeSpring applied, hydraulic release multiple disk
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)2.23 (36.6)
Pumps - Displacement high flow aux., in³ (cc)0.84 (13.8)
Pumps - Flow, gpm (Lpm)24.2 (91.5)
Pumps - Optional high flow, gpm (Lpm)33.2 (125.7)
Loader control valve type3 Spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.5 (63.5)
Lift cylinder - Rod diameter, in (mm)1.75 (44.45)
Lift cylinder - Stroke, in (mm)31.69 (804.9)
Lift cylinder - Closed length, in (mm)45.59 (1158)
Bucket cylinders - Bore diameter, in (mm)2.75 (69.9)
Bucket cylinders - Rod diameter, in (mm)1.38 (34.9)
Bucket cylinders - Stroke, in (mm)16.14 (410)
Bucket cylinders - Closed length, in (mm)24.02 (610)
Weights
Operating weight, lbs (kg)6970 (3160)
Shipping weight, lbs (kg)6670 (3025)
Service Capacities
Fuel tank, gal (L)19.5 (73.8)
Engine oil with filter, qt (L)10 (9.4)
Hydraulic system: System capacity with filter, qt (L)34 (32.2)
Hydraulic system: Chain tanks (per side), qt (L)27.5 (26)
Rated operating load 50% tip, lbs (kg)2100 (905)
Rated operating load Tipping load, lbs (kg)4000 (1814)
Breakout forces: Lift cylinder, lbs (kN)4570 (20.3)
Breakout forces: Bucket cylinder, lbs (kN)7270 (32.3)
Cycle times - Raise, sec3.6
Cycle times - Lower, sec1.8
Cycle times - Dump, sec2.2
Cycle times - Roll back, sec1.7

L223

Rated Operating Capacity2,250 lbs (1020 kg)
Gross Horsepower74 hp (55 kW)
Operating Weight7,380 lbs (3350 kg)


Standard  Optional 
L223
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)159.7 (4056)
Overall operating height with low profile/standard lip bucket, in (mm)163.7 (4159)
Overall operating height with low profile extended/long lip bucket, in (mm)168.8 (4287)
Height to Bucket hinge pin, in (mm)129.4 (3287)
Height to Top of ROPS, in (mm)78.8 (2002)
Height to Bottom of level bucket, fully raised, in (mm)122.6 (3115)
Overall length without attachment with coupler, in (mm)117.8 (2993)
Overall length with foundry excavation bucket on ground, in (mm)142.9 (3631)
Overall length with low profile bucket, in (mm)147 (3734)
Overall length with low profile extended bucket, in (mm)152.1 (3863)
Dump angle, degrees55
Dump height with foundry/excavating bucket short lip, in (mm).102.9 (2615)
Dump height with low profile/standard lip bucket, in (mm).100 (2541)
Dump reach (max height), in (mm)32.3 (821)
Maximum attachment rollback - Bucket on ground, degrees34
Maximum attachment rollback - Bucket at full height, degrees85
Wheelbase, in (mm)52 (1322)
Ground clearance (bottom of belly pan), in (mm)8 (203)
Angle of departure, degrees24
Clearance circle without bucket, in (mm)56.2 (1428)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)NA
Clearance circle with 60” inch low profile bucket on ground, in (mm)NA
Clearance circle with 60” inch extended low profile on ground, in (mm)NA
Clearance circle with foundry bucket in carry position, in (mm)80.3 (2039) with 72” bucket
Clearance circle with low profile bucket on ground, in (mm)87 (2210) with 72” bucket
Clearance circle with extended low profile on ground, in (mm)91.5 (2323) with 72” bucket
Clearance circle rear, in (mm)70.4 (1789)
Rear axle to bumper, in (mm)40.7 (1034)
Tread width, in (mm)56.9 (1448) with 12” x 16.5” tires
Overall width, in (mm)69.6 (1768)
Engine
Manufacturer/modelFPT / F5H FL463
TypeDiesel 4-stroke, Turbo, D.I.
Cylinder4
Bore/stroke, in (mm)3.9 x 4.1 (99 x 110)
Displacement, in³ (L)195 (3.2)
Fuel injectionHPCR Direct
Fuel#2 diesel
Fuel filterPre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intakeTurbocharged with external CEGR
CoolingLiquid
Engine speed High idle - no load, rpm2500 +/- 25
Engine speed Rated - full load, rpm2500
Engine speed Low idle, rpm1150 +/- 25
Horsepower per SAE J1349: Gross hp (kW)74 (55) @ 2500 rpm
Horsepower per SAE J1349: Net hp (kW)68 (51) @ 2500 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)232 (314) @1400 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)46 (2.81)
Drive pump mechanical - Flow, gpm (Lpm)NA
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)29.4 (111)
Drive pump mechanical - Charge pressure, psi (bar)360 (24.5 )
Drive pump mechanical - System relief, psi (bar)5220 (360)
Drive pump mechanical - ControlMechanical servo
Drive pump electro hydraulic - Pump to engine ratio1:1
Drive pump electro hydraulic - Displacement, in³ (cc)2.75 (45)
Drive pump electro hydraulic - Flow, gpm (Lpm)28.8 (109)
Drive pump electro hydraulic - Charge pressure, psi (bar)362 (25)
Drive pump electro hydraulic - System relief, psi (bar)5220 (360)
Drive pump electro hydraulic - ControlElectro hydraulic
Drive motors - Max displacement, in³ (cc)28.7 (470)
Drive motors - Speed @ high idle engine rpm237
Drive motors - Speed @ optional high speed, rpm355
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1987 (2694)
Travel speed with spec tires - Low range, mph (km/h)7.0 (11.3)
Travel speed with spec tires - High range (optional), mph (km/h)10.5 (16.9)
Final driveSingle-reduction chain drive
Drive chain sizeASA #100
Axles - Diameter, in (mm)2.44 (62)
Axles - Length, in (mm)15.6 (396)
Parking brake typeSpring applied, hydraulic release disc
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)2.23 (36.6)
Pumps - Displacement high flow aux., in³ (cc)1.24 (20.4)
Pumps - Flow, gpm (Lpm)24.2 (91.5)
Pumps - Optional high flow, gpm (Lpm)37.6 (142.5)
Loader control valve type3 spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.5 (63.5)
Lift cylinder - Rod diameter, in (mm)1.75 (44.45)
Lift cylinder - Stroke, in (mm)33.5 (851.9)
Lift cylinder - Closed length, in (mm)46.9 (1192)
Bucket cylinders - Bore diameter, in (mm)3.0 (76.2)
Bucket cylinders - Rod diameter, in (mm)1.5 (38.1)
Bucket cylinders - Stroke, in (mm)16.1 (410)
Bucket cylinders - Closed length, in (mm)24 (610)
Weights
Operating weight, lbs (kg)7400 (3350)
Shipping weight, lbs (kg)7065 (3200)
Service Capacities
Fuel tank, gal (L)25.5 (96.5)
Engine oil with filter, qt (L)10 (9.4)
Hydraulic system: System capacity with filter, qt (L)47 (44.5)
Hydraulic system: Chain tanks (per side), qt (L)29.5 (27.9)
Rated operating load 50% tip, lbs (kg)2250 (1020)
Rated operating load Tipping load, lbs (kg)4500 (2045)
Breakout forces: Lift cylinder, lbs (kN)5080 (22.6)
Breakout forces: Bucket cylinder, lbs (kN)8620 (38.3)
Cycle times - Raise, sec3.8
Cycle times - Lower, sec2.4
Cycle times - Dump, sec2.6
Cycle times - Roll back, sec2.0

L225

Rated Operating Capacity2,500 lbs (1135 kg)
Gross Horsepower82 hp (61 kW)
Operating Weight7,900 lbs (3580 kg)


Standard  Optional 
L225
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)159.7 (4056)
Overall operating height with low profile/standard lip bucket, in (mm)163.7 (4159)
Overall operating height with low profile extended/long lip bucket, in (mm)168.8 (4287)
Height to Bucket hinge pin, in (mm)129.4 (3287)
Height to Top of ROPS, in (mm)78.8 (2002)
Height to Bottom of level bucket, fully raised, in (mm)122.6 (3115)
Overall length without attachment with coupler, in (mm)117.8 (2993)
Overall length with foundry excavation bucket on ground, in (mm)142.9 (3631)
Overall length with low profile bucket, in (mm)147 (3734)
Overall length with low profile extended bucket, in (mm)152.1 (3863)
Dump angle, degrees55
Dump height with foundry/excavating bucket short lip, in (mm).102.9 (2615)
Dump height with low profile/standard lip bucket, in (mm).100 (2541)
Dump reach (max height), in (mm)32.3 (821)
Maximum attachment rollback - Bucket on ground, degrees34
Maximum attachment rollback - Bucket at full height, degrees85
Wheelbase, in (mm)52 (1322)
Ground clearance (bottom of belly pan), in (mm)8 (203)
Angle of departure, degrees24
Clearance circle without bucket, in (mm)56.2 (1428)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)NA
Clearance circle with 60” inch low profile bucket on ground, in (mm)NA
Clearance circle with 60” inch extended low profile on ground, in (mm)NA
Clearance circle with foundry bucket in carry position, in (mm)80.3 (2039) with 72” bucket
Clearance circle with low profile bucket on ground, in (mm)87 (2210) with 72” bucket
Clearance circle with extended low profile on ground, in (mm)91.5 (2323) with 72” bucket
Clearance circle rear, in (mm)70.4 (1789)
Rear axle to bumper, in (mm)40.7 (1034)
Tread width, in (mm)56.9 (1448) with 12” x 16.5” tires
Overall width, in (mm)69.6 (1768)
Engine
Manufacturer/modelFPT / F5H FL413
TypeDiesel 4-stroke, Turbo, D.I.
Cylinder4
Bore/stroke, in (mm)3.9 x 4.1 (99 x 110)
Displacement, in³ (L)195 (3.2)
Fuel injectionHPCR Direct
Fuel#2 diesel
Fuel filterPre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intakeTurbocharged Aftercooled with external CEGR
CoolingLiquid
Engine speed High idle - no load, rpm2500 +/- 25
Engine speed Rated - full load, rpm2500
Engine speed Low idle, rpm1150 +/- 25
Horsepower per SAE J1349: Gross hp (kW)82 (61) @ 2500 rpm
Horsepower per SAE J1349: Net hp (kW)76 (57) @ 2500 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)257 (349) @ 1400 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)46 (2.81)
Drive pump mechanical - Flow, gpm (Lpm)NA
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)29.4 (111)
Drive pump mechanical - Charge pressure, psi (bar)360 (24.5 )
Drive pump mechanical - System relief, psi (bar)5220 (360)
Drive pump mechanical - ControlMechanical servo
Drive pump electro hydraulic - Pump to engine ratio1:1
Drive pump electro hydraulic - Displacement, in³ (cc)2.75 (45)
Drive pump electro hydraulic - Flow, gpm (Lpm)28.8 (109)
Drive pump electro hydraulic - Charge pressure, psi (bar)362 (25)
Drive pump electro hydraulic - System relief, psi (bar)5220 (360)
Drive pump electro hydraulic - ControlElectro hydraulic
Drive motors - Max displacement, in³ (cc)28.7 (470)
Drive motors - Speed @ high idle engine rpm237
Drive motors - Speed @ optional high speed, rpm355
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1987 (2694)
Travel speed with spec tires - Low range, mph (km/h)7.0 (11.3)
Travel speed with spec tires - High range (optional), mph (km/h)10.5 (16.9)
Final driveSingle-reduction chain drive
Drive chain sizeASA #100
Axles - Diameter, in (mm)2.44 (62)
Axles - Length, in (mm)15.6 (396)
Parking brake typeSpring applied, hydraulic release disc
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)2.23 (36.6)
Pumps - Displacement high flow aux., in³ (cc)1.24 (20.4)
Pumps - Flow, gpm (Lpm)24.2 (91.5)
Pumps - Optional high flow, gpm (Lpm)37.6 (142.5)
Loader control valve type3 spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.5 (63.5)
Lift cylinder - Rod diameter, in (mm)1.75 (44.45)
Lift cylinder - Stroke, in (mm)33.5 (851.9)
Lift cylinder - Closed length, in (mm)46.9 (1192)
Bucket cylinders - Bore diameter, in (mm)3.0 (76.2)
Bucket cylinders - Rod diameter, in (mm)1.5 (38.1)
Bucket cylinders - Stroke, in (mm)16.1 (410)
Bucket cylinders - Closed length, in (mm)24 (610)
Weights
Operating weight, lbs (kg)7900 (3580)
Shipping weight, lbs (kg)7565 (3430)
Service Capacities
Fuel tank, gal (L)25.5 (96.5)
Engine oil with filter, qt (L)10 (9.4)
Hydraulic system: System capacity with filter, qt (L)47 (44.5)
Hydraulic system: Chain tanks (per side), qt (L)29.5 (27.9)
Rated operating load 50% tip, lbs (kg)2500 (1135)
Rated operating load Tipping load, lbs (kg)5000 (2268)
Breakout forces: Lift cylinder, lbs (kN)5080 (22.6)
Breakout forces: Bucket cylinder, lbs (kN)8620 (38.3)
Cycle times - Raise, sec3.8
Cycle times - Lower, sec2.4
Cycle times - Dump, sec2.6
Cycle times - Roll back, sec2.0

L230

Rated Operating Capacity3,000 lbs (1360kg)
Gross Horsepower90 hp (67 kW)
Operating Weight8,300 lbs (3765 kg)


Standard  Optional 
L230
Dimensions
Overall operating height with foundry/excavating bucket short lip, in (mm)161.3 (4096)
Overall operating height with low profile/standard lip bucket, in (mm)165.3 (4199)
Overall operating height with low profile extended/long lip bucket, in (mm)170.4 (4327)
Height to Bucket hinge pin, in (mm)131.1 (3327)
Height to Top of ROPS, in (mm)80.4 (2042)
Height to Bottom of level bucket, fully raised, in (mm)124.2 (3155)
Overall length without attachment with coupler, in (mm)117.6 (2986)
Overall length with foundry excavation bucket on ground, in (mm)142.7 (3624)
Overall length with low profile bucket, in (mm)146.7 (3727)
Overall length with low profile extended bucket, in (mm)151.8 (3856)
Dump angle, degrees55
Dump height with foundry/excavating bucket short lip, in (mm).104.5 (2655)
Dump height with low profile/standard lip bucket, in (mm).101.6 (2581)
Dump reach (max height), in (mm)30.7 (781)
Maximum attachment rollback - Bucket on ground, degrees33
Maximum attachment rollback - Bucket at full height, degrees85
Wheelbase, in (mm)52 (1322)
Ground clearance (bottom of belly pan), in (mm)9.5 (243)
Angle of departure, degrees27
Clearance circle without bucket, in (mm)56.2 (1428)
Clearance circle with 60” inch foundry bucket in carry position, in (mm)NA
Clearance circle with 60” inch low profile bucket on ground, in (mm)NA
Clearance circle with 60” inch extended low profile on ground, in (mm)NA
Clearance circle with foundry bucket in carry position, in (mm)84.8 (2155) with 78” bucket
Clearance circle with low profile bucket on ground, in (mm)88.4 (2246) with 78” bucket
Clearance circle with extended low profile on ground, in (mm)92.6 (2352) with 78” bucket
Clearance circle rear, in (mm)70.4 (1789)
Rear axle to bumper, in (mm)40.7 (1034)
Tread width, in (mm)62.2 (1580) with 14” x 17.5” tires
Overall width, in (mm)76 (1930)
Engine
Manufacturer/modelFPT / F5H413
TypeDiesel 4-stroke, Turbo, D.I.
Cylinder4
Bore/stroke, in (mm)3.9 x 4.1 (99 x 110)
Displacement, in³ (L)207.5 (3.4)
Fuel injectionHPCR Direct
Fuel#2 diesel
Fuel filterPre-filter 99.8% @ 30 microns - Main filter 95% @ 4 microns
Air intakeTurbocharged Aftercooled with external CEGR
CoolingLiquid
Engine speed High idle - no load, rpm2500 +/- 25
Engine speed Rated - full load, rpm2500
Engine speed Low idle, rpm1150 +/- 25
Horsepower per SAE J1349: Gross hp (kW)90 (67) @ 2500 rpm
Horsepower per SAE J1349: Net hp (kW)84 (63) @ 2500 rpm
Horsepower per SAE J1349: Peak torque, lb-ft (N•m)282 (383) @ 1400 rpm
Power Train
Drive pump mechanical - Pump to engine ratio1:1
Drive pump mechanical - Displacement, in³ (cc)46 (2.81)
Drive pump mechanical - Flow, gpm (Lpm)NA
Drive pump mechanical - Flow at rated engine rpm @100% eff., gpm (Lpm)29.4 (111)
Drive pump mechanical - Charge pressure, psi (bar)360 (24.5 )
Drive pump mechanical - System relief, psi (bar)5220 (360)
Drive pump mechanical - ControlMechanical servo
Drive pump electro hydraulic - Pump to engine ratio1:1
Drive pump electro hydraulic - Displacement, in³ (cc)2.75 (45)
Drive pump electro hydraulic - Flow, gpm (Lpm)28.8 (109)
Drive pump electro hydraulic - Charge pressure, psi (bar)362 (25)
Drive pump electro hydraulic - System relief, psi (bar)5220 (360)
Drive pump electro hydraulic - ControlElectro hydraulic
Drive motors - Max displacement, in³ (cc)28.7 (470)
Drive motors - Speed @ high idle engine rpm237
Drive motors - Speed @ optional high speed, rpm355
Drive motors - Torque @ max displ. and relief pressure, ft-lbs (N•m)1987 (2694)
Travel speed with spec tires - Low range, mph (km/h)7.7 (12.4)
Travel speed with spec tires - High range (optional), mph (km/h)11.5 (18.5)
Final driveSingle-reduction chain drive
Drive chain sizeASA #100
Axles - Diameter, in (mm)2.44 (62)
Axles - Length, in (mm)15.6 (396)
Parking brake typeSpring applied, hydraulic release disc
Parking brake EngagementDepress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System
Pumps typeGear
Pumps - Displacement standard aux., in³ (cc)2.23 (36.6)
Pumps - Displacement high flow aux., in³ (cc)1.24 (20.4)
Pumps - Flow, gpm (Lpm)24.2 (91.5)
Pumps - Optional high flow, gpm (Lpm)37.6 (142.5)
Loader control valve type3 spool / open center / series
Loader control valve - Relief pressure, psi (bar)3046 (210)
Loader control valve - Hydraulic filter4 microns / spin on
Cylinders
Lift cylinder - Bore diameter, in (mm)2.75 (68.85)
Lift cylinder - Rod diameter, in (mm)2.0 (50.8)
Lift cylinder - Stroke, in (mm)33.4 (847.9)
Lift cylinder - Closed length, in (mm)47.1 (1196)
Bucket cylinders - Bore diameter, in (mm)3.0 (76.2)
Bucket cylinders - Rod diameter, in (mm)1.5 (38.1)
Bucket cylinders - Stroke, in (mm)16.1 (410)
Bucket cylinders - Closed length, in (mm)24 (610)
Weights
Operating weight, lbs (kg)8300 (3765)
Shipping weight, lbs (kg)7965 (3610)
Service Capacities
Fuel tank, gal (L)25.5 (96.5)
Engine oil with filter, qt (L)10 (9.4)
Hydraulic system: System capacity with filter, qt (L)47 (44.5)
Hydraulic system: Chain tanks (per side), qt (L)29.5 (27.9)
Rated operating load 50% tip, lbs (kg)3000 (1360)
Rated operating load Tipping load, lbs (kg)6000 (2722)
Breakout forces: Lift cylinder, lbs (kN)6350 (28.2)
Breakout forces: Bucket cylinder, lbs (kN)8620 (38.3)
Cycle times - Raise, sec4.5
Cycle times - Lower, sec2.6
Cycle times - Dump, sec2.6
Cycle times - Roll back, sec2.0

See product brochure for full specifications and options.

social stream
Top Service:


New Holland Agriculture © 2015
back to top