TECHNICAL SPECIFICATIONS

Standard Optional
Cutter Bar
 
Cutting width ft. in. (mm)
Cutting height in. (mm)
Cutter bar tilt angle degrees
Cutter bar operating range degrees
Breakaway angle degrees
Cutter bar floatation
Type cutterbar
Number of discs
Knives per disc
Disc cutting diameter in. (mm)
Disc drive
Disc speed RPM
Cutter bar gear protection
Swath width, approx standard** in. (mm)
Swath width with optional swathboards** in. (m)
H6730 MountedH6740 MountedH6750 MountedH6830 Side Pull
6' 8" (2032)7' 10" (2388)9' 2" (2794)10' 4" (3150)
0.95-3.25 (24-82.5)0.95-3.25 (24-82.5)0.95-3.25 (24-82.5)0.95-3.2 (24-82.5)
0 to -100 to -100 to -10-2 to -10
+18 to -32+18 to -30+18 to -28+18 to -28
191919NA
Vertical adjustable springVertical adjustable springVertical adjustable springVertical and lateral, adjustable springs
MowMax™ cutterbar, modular, w/individual sealed reservoirsMowMax™ cutterbar, modular, w/individual sealed reservoirsMowMax™ cutterbar, modular, w/individual sealed reservoirsMowMax™ cutterbar, modular, w/individual sealed reservoirs
5678
2222
19.7 (500)19.7 (500)19.7 (500)19.7 (500)
Bevel gears in sealed modulesBevel gears in sealed modulesBevel gears in sealed modulesBevel gears in sealed modules
3,0003,0003,0002,835
Std. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splinesStd. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splinesStd. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splinesStd. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splines
80 (2032)94 (2388)110 (2794)95 (2413)
48 (1219) includes LH & RH swathboards62 (1575) includes LH & RH swathboards78 (1981) includes LH & RH swathboardsNA
Driveline
 
Minimum PTO horsepower required hp (kW)
Input speed RPM
PTO shaft spline/size required
Driveline protection
Overrunning clutch
Belt tension
H6730 MountedH6740 MountedH6750 MountedH6830 Side Pull
45 (33.5)55 (40.9)60 (44.7)60 (44.7)
540540540540
6-spline/ 1-3/8"6-spline/ 1-3/8"6-spline/ 1-3/8"6-spline/ 1-3/8"
Belt drive to cutter barBelt drive to cutter barBelt drive to cutter barSlip clutch
Spring-loaded tensioner with adjustment gaugeSpring-loaded tensioner with adjustment gaugeSpring-loaded tensioner with adjustment gaugeNA
Hydraulics and Hitch
 
Hydraulic circuits required
Minimum relief pressure required psi (bar)
Hitch
H6730 MountedH6740 MountedH6750 MountedH6830 Side Pull
One remoteOne remoteOne remoteTwo remotes
1,500 (104)1,500 (104)1,500 (104)1,500 (104)
Category I or IICategory IICategory IICategory II drawbar
Dimensions and Weight
 
Overall width in. (mm)
Overall length in. (mm)
Height - transport position* in. (mm)
Weight, shipping lb. (kg)
Weight, operating lb. (kg)
Maximum transport speed
Tires/wheels
H6730 MountedH6740 MountedH6750 MountedH6830 Side Pull
138.75 (3524)160.25 (4070)181.75 (4616)196 (4978)
42.5 (1080)50.5 (1283)50.5 (1283)183 (4648)
98 (2489)119.5 (3035)141 (3581)62 (1575)
1,440 (653)1,610 (730)1,750 (794)3,035 (1379)
1,300 (590)1,460 (662)1,590 (721)2,610 (1186)
NANANA20 mph/ 32.2 kph
NANANA27 x 9.5 x 15 6 PR
social stream
Kongskilde:
Top Service:


New Holland Agriculture © 2017
back to top