TECHNICAL SPECIFICATIONS

Standard Optional
Cutterbar
 
Cutting width ft. in. (m)
Cutting height in. (mm)
Cutterbar tilt angle degrees
Cutterbar operating range degrees
Breakaway angle degrees
Cutterbar flotation
Type cutterbar
Number of discs
Knives per disc
Disc cutting diameter in. (mm)
Disc drive
Disc speed RPM
Cutterbar gear protection
Swath width, approx standard* in. (mm)
Swath width with optional swathboards* in. (mm)
DuraDisc™ 107MDuraDisc™ 108MDuraDisc™ 109MDuraDisc™ 210M
6'8" (2.0)7'10" (2.4)9'2" (2.8)10'4" (3.2)
1.25-3.5 (32-89)1.25-3.5 (32-89)1.25-3.5 (32-89)0.95-3.2 (24-81)
0 to -100 to -100 to -10-2 to -10
+18 to -32+18 to -30+18 to -28+18 to -28
1930.530.5
Vertical adjustable springVertical adjustable springVertical adjustable springVertical and lateral, adjustable springs
MowMax™ cutterbar, modular, with individual sealed reservoirsMowMax™ cutterbar, modular, with individual sealed reservoirsMowMax™ cutterbar, modular, with individual sealed reservoirsMowMax™ cutterbar, modular, with individual sealed reservoirs
5678
2222
19.7 (500)19.7 (500)19.7 (500)19.7 (500)
Bevel gears in sealed modulesBevel gears in sealed modulesBevel gears in sealed modulesBevel gears in sealed modules
3000300030003000
Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splinesStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splinesStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splinesStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines
80 (2032)94 (2388)110 (2794)95 (2413)
48 (1219) includes LH & RH swathboards62 (1575) includes LH & RH swathboards78 (1981) includes LH & RH swathboards
Driveline
 
Minimum PTO horsepower required hp (kW)
Input speed RPM
PTO shaft spline/size required
Driveline protection
Overrunning clutch
Belt tension
DuraDisc™ 107MDuraDisc™ 108MDuraDisc™ 109MDuraDisc™ 210M
45 (33.5)55 (40.9)60 (44.7)60 (44.7)
540540540540
6-spline / 1-3/8"6-spline / 1-3/8”6-spline / 1-3/8”6-spline / 1-3/8”
Belt drive to cutter barBelt drive to cutter barBelt drive to cutter barSlip clutch
Spring-loaded tensioner with adjustment gaugeSpring-loaded tensioner with adjustment gaugeSpring-loaded tensioner with adjustment gauge
Hydraulics and Hitch
 
Hydraulic circuits required
Minimum relief pressure required psi (bar)
Hitch
DuraDisc™ 107MDuraDisc™ 108MDuraDisc™ 109MDuraDisc™ 210M
One remoteOne remoteOne remoteTwo remotes
1500 (103)1500 (103)1500 (103)1500 (103)
Category I/II or Category II Category II quick hitch compatibleCategory II quick hitch compatibleDrawbar clevis hitch
Dimensions and Weight
 
Overall width in. (mm)
Overall length in. (mm)
Height - transport position** in. (mm)
Weight, operating lb. (kg)
Maximum transport speed
Tires/wheels
DuraDisc™ 107MDuraDisc™ 108MDuraDisc™ 109MDuraDisc™ 210M
138.75 (3524)160.25 (4070)181.75 (4616)196 (4978)
42.5 (1080)50.5 (1283)50.5 (1283)183 (4648)
98 (2489)119.5 (3035)141 (3581)62 (1575)
1200 (546)1405 (639)1535 (698)2610 (1186)
20 mph/ 32.2 kph
27 x 9.5 x 15 6 PR

Standard – Not available ​
Note: Recommended for use with tractors having a fully enclosed cab
* Heavy swaths may fluff out to a wider swath after exiting the swathboard(s)
** Transport height is based on hitch pins being 24 in. (609 mm) above ground on DuraDisc 107M model and 18 in. (457 mm) above ground on DuraDisc 108M and 109M

social stream
Kongskilde:
Top Service:


New Holland Agriculture © 2018
back to top