MODELS

Discbine® 310 (Steel)

Cutting width ft. in. (m)10’ 4” (3.15)
Number of discs8
Conditioning SystemSteel Y-Tine Flails
Tongue DesignCenter Pivot


Standard  Optional 
Discbine® 310 (Steel)
Cutterbar
Cutting width ft. in. (m)10’ 4” (3.15)
Cutterbar typeLow profile disc cutterbar
Number of discs8
Knives per disc2
Tilt angle degrees0-9°
FlotationTop Safe cutterbar angle & vertical movement
Theoretical cutting height in (mm)1-3.9 (25-100)
Cutting height w/opt. high-stubble shoes in (mm)2.2-5.1 (55-130)
Roll Conditioner
Type-
Width ft. (m)-
Drive method-
Speed rpm-
Conditioner roll tension adjustment-
Conditioner gap adjustment-
Steel Y-Tine Flail Conditioner
TypeY-Tine Flail Rotor with 70 flails
Drive methodBelt driven
Speed rpm1000
Conditioner gap adjustmentCentral, Single point
Crop discharge
Swath width ft. (m)8.2 (2.5)
Windrow width ft. (m)4-6.5 (1.2-2.0)
Driveline
PTO shaft spline/size1 3/8- 21 Spline
Input speed rpm1000 (only)
Drive protectionCombined Friction Slip & Overrunning Clutch Assembly
Tongue
TypeCenter Pivot
Hitch type2-point semi mounted swivel hitch attachment, Category II Only (Not quick hitch compatible)
Tractor Requirements
Minimum PTO power requirement hp (kw)82 (60)
Hydraulic circuits required1 SA, 1 DA
3-pt. hitch categoryCategory II, Three-point
Tires380/55-17 Tubeless Ag Rib Implement Tires
Transport speed mph (kph)20 (32)
Dimensions
Width transporting ft. in. (m)9’ 10” (3.0)
Width operating ft. in. (m)16’ (4.9)
Length transport ft. in. (m)19’ 7” (5.96)
Height transport ft. in. (m)6’ 5” (1.95)
Ground clearance with head fully raised in. (mm)19 (481)
*Weight lbs (kg)5290 (2400)

Discbine® 310 (Chevron Rubber)

Cutting width ft. in. (m)10’ 4” (3.15)
Number of discs8
Conditioning SystemChevron intermeshing molded rubber rolls
Tongue DesignCenter Pivot


Standard  Optional 
Discbine® 310 (Chevron Rubber)
Cutterbar
Cutting width ft. in. (m)10’ 4” (3.15)
Cutterbar typeLow profile disc cutterbar
Number of discs8
Knives per disc2
Tilt angle degrees0-9°
FlotationTop Safe cutterbar angle & vertical movement
Theoretical cutting height in (mm)1-3.9 (25-100)
Cutting height w/opt. high-stubble shoes in (mm)2.2-5.1 (55-130)
Roll Conditioner
TypeChevron Rubber Roll
Width ft. (m)8.25 (2.51)
Drive methodBelt driven, synchronized roll drive
Speed rpm970
Conditioner roll tension adjustmentSpring Tension
Conditioner gap adjustmentAdjustable, stop bolt
Steel Y-Tine Flail Conditioner
Type-
Drive method-
Speed rpm-
Conditioner gap adjustment-
Crop discharge
Swath width ft. (m)6.5 (2.0)
Windrow width ft. (m)4-6.5 (1.2-2.0)
Driveline
PTO shaft spline/size1 3/8- 21 Spline
Input speed rpm1000 (only)
Drive protectionCombined Friction Slip & Overrunning Clutch Assembly
Tongue
TypeCenter Pivot
Hitch type2-point semi mounted swivel hitch attachment, Category II Only (Not quick hitch compatible)
Tractor Requirements
Minimum PTO power requirement hp (kw)82 (60)
Hydraulic circuits required1 SA, 1 DA
3-pt. hitch categoryCategory II, Three-point
Tires380/55-17 Tubeless Ag Rib Implement Tires
Transport speed mph (kph)20 (32)
Dimensions
Width transporting ft. in. (m)9’ 10” (3.0)
Width operating ft. in. (m)16’ (4.9)
Length transport ft. in. (m)19’ 7” (5.96)
Height transport ft. in. (m)6’ 5” (1.95)
Ground clearance with head fully raised in. (mm)19 (481)
*Weight lbs (kg)5290 (2400)

Discbine® 312 (Steel)

Cutting width ft. in. (m)11’ 6” (3.51)
Number of discs9
Conditioning SystemSteel Y-Tine Flails
Tongue DesignCenter Pivot


Standard  Optional 
Discbine® 312 (Steel)
Cutterbar
Cutting width ft. in. (m)11’ 6” (3.51)
Cutterbar typeLow profile disc cutterbar
Number of discs9
Knives per disc2
Tilt angle degrees0-9°
FlotationTop Safe cutterbar angle & vertical movement
Theoretical cutting height in (mm)1-3.9 (25-100)
Cutting height w/opt. high-stubble shoes in (mm)2.2-5.1 (55-130)
Roll Conditioner
Type-
Width ft. (m)-
Drive method-
Speed rpm-
Conditioner roll tension adjustment-
Conditioner gap adjustment-
Steel Y-Tine Flail Conditioner
TypeY-Tine Flail Rotor with 86 flails
Drive methodBelt driven
Speed rpm1000
Conditioner gap adjustmentCentral, Single point
Crop discharge
Swath width ft. (m)9.2 (2.8)
Windrow width ft. (m)4-6.5 (1.2-2.0)
Driveline
PTO shaft spline/size1 3/8- 21 Spline
Input speed rpm1000 (only)
Drive protectionCombined Friction Slip & Overrunning Clutch Assembly
Tongue
TypeCenter Pivot
Hitch type2-point semi mounted swivel hitch attachment, Category II Only (Not quick hitch compatible)
Tractor Requirements
Minimum PTO power requirement hp (kw)87 (64)
Hydraulic circuits required1 SA, 1 DA
3-pt. hitch categoryCategory II, Three-point
Tires380/55-17 Tubeless Ag Rib Implement Tires
Transport speed mph (kph)20 (32)
Dimensions
Width transporting ft. in. (m)11’ 4” (3.46)
Width operating ft. in. (m)17’ 10” (5.45)
Length transport ft. in. (m)21’ (6.41)
Height transport ft. in. (m)6’ 5” (1.95)
Ground clearance with head fully raised in. (mm)19 (481)
*Weight lbs (kg)5776 (620)

Discbine® 312 (Chevron Rubber)

Cutting width ft. in. (m)11’ 6” (3.51)
Number of discs9
Conditioning SystemChevron intermeshing molded rubber rolls
Tongue DesignCenter Pivot


Standard  Optional 
Discbine® 312 (Chevron Rubber)
Cutterbar
Cutting width ft. in. (m)11’ 6” (3.51)
Cutterbar typeLow profile disc cutterbar
Number of discs9
Knives per disc2
Tilt angle degrees0-9°
FlotationTop Safe cutterbar angle & vertical movement
Theoretical cutting height in (mm)1-3.9 (25-100)
Cutting height w/opt. high-stubble shoes in (mm)2.2-5.1 (55-130)
Roll Conditioner
TypeChevron Rubber Roll
Width ft. (m)9.5 (2.92)
Drive methodBelt driven, synchronized roll drive
Speed rpm970
Conditioner roll tension adjustmentSpring Tension
Conditioner gap adjustmentAdjustable, stop bolt
Steel Y-Tine Flail Conditioner
Type-
Drive method-
Speed rpm-
Conditioner gap adjustment-
Crop discharge
Swath width ft. (m)6.5 (2.0)
Windrow width ft. (m)4-6.5 (1.2-2.0)
Driveline
PTO shaft spline/size1 3/8- 21 Spline
Input speed rpm1000 (only)
Drive protectionCombined Friction Slip & Overrunning Clutch Assembly
Tongue
TypeCenter Pivot
Hitch type2-point semi mounted swivel hitch attachment, Category II Only (Not quick hitch compatible)
Tractor Requirements
Minimum PTO power requirement hp (kw)87 (64)
Hydraulic circuits required1 SA, 1 DA
3-pt. hitch categoryCategory II, Three-point
Tires380/55-17 Tubeless Ag Rib Implement Tires
Transport speed mph (kph)20 (32)
Dimensions
Width transporting ft. in. (m)11’ 4” (3.46)
Width operating ft. in. (m)17’ 10” (5.45)
Length transport ft. in. (m)21’ (6.41)
Height transport ft. in. (m)6’ 5” (1.95)
Ground clearance with head fully raised in. (mm)19 (481)
*Weight lbs (kg)5776 (620)

— Not available
* Approximated

social stream
Kongskilde:
Top Service:


New Holland Agriculture © 2017
back to top