Windrower Headers

SUPERIOR DISC, SICKLE AND DRAPER HEADERS

MODELS

Durabine™ 416

Number of discs10
Cutting width ft. in. (m)16’ 1” (4.9)
Conditioning system102” chevron intermeshing rubber or steel rolls, or high-contact rolls or 90” Leaning Edge™ flail system
Versions available-


Standard  Optional 
Durabine™ 416
Header drive
Cutting width ft. in. (m)16’ 1” (4.9)
Overall width ft. in. (m)16' 4" (4956)
Approximate weight lbs. (kg)4700 (2132)
Versions available-
Windrow/swath width in. (mm)38 to 96 (965 to 2438)
Cutterbar
Cutterbar type10-disc modular disc cutterbar, 2500-rpm max disc speed
Knives20 reversible, swing-away knives (2 per disc)
Knife speed181-mph(291-kph) knife tip speed
Sickle stroke in. (mm)-
FlotationHydraulic adjustment from windrower cab
Cutting angle and height, degrees, in (m)Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89) with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)27 (686)*
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)-
Speed range rpm-
Drive-
Raptor Draper Belts
Belt width and construction-
Belt/roller guide design-
Roller design-
Speed range ft. (m)-
Cleat design and height in. (mm)-
Chaff barrier seal design-
Belt angle degrees (@minimum cutterbar tilt)-
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Flighting depth in. (mm)7 (178)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm938
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop bolt
Conditioner (Flails)
Length in. (m)90 (2.3)
Speed rpm1310
Hood positionAdjusted with a single crank

Durabine™ 419

Number of discs12
Cutting width ft. in. (m)19’ 4” (5.9)
Conditioning system102” chevron intermeshing rubber or steel rolls, or high-contact rolls
Versions available-


Standard  Optional 
Durabine™ 419
Header drive
Cutting width ft. in. (m)19’ 4” (5.9)
Overall width ft. in. (m)19' 5" (5912)
Approximate weight lbs. (kg)5340 (2422)
Versions available-
Windrow/swath width in. (mm)38 to 96 (965 to 2438)
Cutterbar
Cutterbar type12-disc modular disc cutterbar, 2500-rpm max disc speed
Knives24 reversible, swing-away knives (2 per disc)
Knife speed181-mph(291-kph) knife tip speed
Sickle stroke in. (mm)-
FlotationHydraulic adjustment from windrower cab
Cutting angle and height, degrees, in (m)Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89) with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)29.6 (754)**
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)-
Speed range rpm-
Drive-
Raptor Draper Belts
Belt width and construction-
Belt/roller guide design-
Roller design-
Speed range ft. (m)-
Cleat design and height in. (mm)-
Chaff barrier seal design-
Belt angle degrees (@minimum cutterbar tilt)-
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Flighting depth in. (mm)7 (178)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm938
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop bolt
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

Durabine™ 416 Specialty Grass Crop

Number of discs10
Cutting width ft. in. (m)16’ 1” (4.9)
Conditioning system-
Versions available-


Standard  Optional 
Durabine™ 416 Specialty Grass Crop
Header drive
Cutting width ft. in. (m)16’ 1” (4.9)
Overall width ft. in. (m)16' 4" (4956)
Approximate weight lbs. (kg)4700 (2132)
Versions available-
Windrow/swath width in. (mm)-
Cutterbar
Cutterbar type10-disc modular disc cutterbar, 2500-rpm max disc speed
Knives20 reversible, swing-away knives (2 per disc)
Knife speed181-mph(291-kph) knife tip speed
Sickle stroke in. (mm)-
FlotationHydraulic adjustment from windrower cab
Cutting angle and height, degrees, in (m)Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89 with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)27 (686)*
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)-
Speed range rpm-
Drive-
Raptor Draper Belts
Belt width and construction-
Belt/roller guide design-
Roller design-
Speed range ft. (m)-
Cleat design and height in. (mm)-
Chaff barrier seal design-
Belt angle degrees (@minimum cutterbar tilt)-
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Flighting depth in. (mm)7 (178)
Conditioner (Rolls)
Type-
Length in. (m)-
Roll speed rpm-
Roll pressure-
Roll gap-
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

DuraSwath™ 425 HB

Number of discs-
Cutting width ft. in. (m)25 (7.6)
Conditioning system-
Versions availableSingle-knife drive, single swath, single reel
Single-knife drive, double swath, single reel
Double-knife drive, single swath, single reel
Double-knife, double swath, single reel


Standard  Optional 
DuraSwath™ 425 HB
Header drive
Cutting width ft. in. (m)25 (7.6)
Overall width ft. in. (m)-
Approximate weight lbs. (kg)4675 (2121) includes reel
Versions availableSingle-knife drive, single swath, single reel
Single-knife drive, double swath, single reel
Double-knife drive, single swath, single reel
Double-knife, double swath, single reel
Windrow/swath width in. (mm)56 - 72 (1420 - 1830) center delivery windrow width
54 - 65 (1370 - 1650) double swath end windrow width
Cutterbar
Cutterbar typeSCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut)
Knives-
Knife speed1400 SPM
Sickle stroke in. (mm)3.35 (85)
Flotation-
Cutting angle and height, degrees, in (m)0.75 (19) @ 8 degrees tilt
Header ground clearance - bottom of skid shoes in. (mm)47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)UII, 6-bat, w/SF or PF; HCC, 6-bat, flipover, w/PF
Speed range rpm10 – 75
DriveSingle reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor;
Raptor Draper Belts
Belt width and construction42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection
Belt/roller guide design V-guide on upper end of inner side of belt with V-groove in rollers
Roller design Rubber vulcanized steel drive roller, steel idler roller
Speed range ft. (m)0 - 760 (0-232)/minute
Cleat design and height in. (mm)1/2" (13) high cleat, w/embedded fiberglass reinforcement
Chaff barrier seal designContinuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard
Belt angle degrees (@minimum cutterbar tilt)15 @ 2 degrees tilt
Auger
Type-
Maximum diameter in. (mm)-
Flighting depth in. (mm)-
Conditioner (Rolls)
Type-
Length in. (m)-
Roll speed rpm-
Roll pressure-
Roll gap-
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

DuraSwath™ 430 HB

Number of discs-
Cutting width ft. in. (m)30 (9.1)
Conditioning system-
Versions availableSingle-knife drive, single swath, single reel
Single-knife drive, double swath, single reel
Double-knife drive, single swath, single reel
Double-knife, double swath, single reel


Standard  Optional 
DuraSwath™ 430 HB
Header drive
Cutting width ft. in. (m)30 (9.1)
Overall width ft. in. (m)-
Approximate weight lbs. (kg)5631 (2554) includes reel
Versions availableSingle-knife drive, single swath, single reel
Single-knife drive, double swath, single reel
Double-knife drive, single swath, single reel
Double-knife, double swath, single reel
Windrow/swath width in. (mm)56 - 72 (1420 - 1830) center delivery windrow width
54 - 65 (1370 - 1650) double swath end windrow width
Cutterbar
Cutterbar typeSCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut)
Knives-
Knife speed1400 SPM
Sickle stroke in. (mm)3.35 (85)
Flotation-
Cutting angle and height, degrees, in (m)0.75 (19) @ 8 degrees tilt
Header ground clearance - bottom of skid shoes in. (mm)47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)UII, 6-bat, w/SF or PF; HCC, 6-bat, flipover, w/PF
Speed range rpm10 – 75
DriveSingle reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor;
Raptor Draper Belts
Belt width and construction42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection
Belt/roller guide design V-guide on upper end of inner side of belt with V-groove in rollers
Roller design Rubber vulcanized steel drive roller, steel idler roller
Speed range ft. (m)0 - 760 (0-232)/minute
Cleat design and height in. (mm)1/2" (13) high cleat, w/embedded fiberglass reinforcement
Chaff barrier seal designContinuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard
Belt angle degrees (@minimum cutterbar tilt)15 @ 2 degrees tilt
Auger
Type-
Maximum diameter in. (mm)-
Flighting depth in. (mm)-
Conditioner (Rolls)
Type-
Length in. (m)-
Roll speed rpm-
Roll pressure-
Roll gap-
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

DuraSwath™ 436 HB

Number of discs-
Cutting width ft. in. (m)36 (11)
Conditioning system-
Versions availableDouble-knife drive, single swath, single reel
Double-knife drive, single swath, split reel
Double-knife, double swath, single reel
Double-knife, double swath, split reel


Standard  Optional 
DuraSwath™ 436 HB
Header drive
Cutting width ft. in. (m)36 (11)
Overall width ft. in. (m)-
Approximate weight lbs. (kg)6702 (3040) includes reel
Versions availableDouble-knife drive, single swath, single reel
Double-knife drive, single swath, split reel
Double-knife, double swath, single reel
Double-knife, double swath, split reel
Windrow/swath width in. (mm)56 - 72 (1420 - 1830) center delivery windrow width
54 - 65 (1370 - 1650) double swath end windrow width
Cutterbar
Cutterbar typeSCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut)
Knives-
Knife speed1400 SPM
Sickle stroke in. (mm)3.35 (85)
Flotation-
Cutting angle and height, degrees, in (m)Minimum 0.75 in (19 mm) @ 8 degrees tilt
Header ground clearance - bottom of skid shoes in. (mm)47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)UII, 6-bat, single, w/PF; UII, 6-bat, split, w/PF; HCC, 6-bat, flipover, w/PF
Speed range rpm10 – 75
DriveSingle reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; Split reels equipped with two, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motors
Raptor Draper Belts
Belt width and construction42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection
Belt/roller guide design V-guide on upper end of inner side of belt with V-groove in rollers
Roller design Rubber vulcanized steel drive roller, steel idler roller
Speed range ft. (m)0 - 760 (0-232)/minute
Cleat design and height in. (mm)1/2" (13) high cleat, w/embedded fiberglass reinforcement
Chaff barrier seal designContinuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard
Belt angle degrees (@minimum cutterbar tilt)15 @ 2 degrees tilt
Auger
Type-
Maximum diameter in. (mm)-
Flighting depth in. (mm)-
Conditioner (Rolls)
Type-
Length in. (m)-
Roll speed rpm-
Roll pressure-
Roll gap-
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

DuraSwath™ 440 HB

Number of discs-
Cutting width ft. in. (m)40 (12.2)
Conditioning system-
Versions availableDouble-knife drive, single swath, split reel


Standard  Optional 
DuraSwath™ 440 HB
Header drive
Cutting width ft. in. (m)40 (12.2)
Overall width ft. in. (m)-
Approximate weight lbs. (kg)7300 (3311) includes reel
Versions availableDouble-knife drive, single swath, split reel
Windrow/swath width in. (mm)56 - 72 (1420 - 1830) center delivery windrow width
Cutterbar
Cutterbar typeSCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut)
Knives-
Knife speed1400 SPM
Sickle stroke in. (mm)3.35 (85)
Flotation-
Cutting angle and height, degrees, in (m)Minimum 0.75 (19) @ 8 degrees tilt
Header ground clearance - bottom of skid shoes in. (mm)47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)UII, 6-bat, split, w/PF; HCC, 6-bat, flipover, w/PF
Speed range rpm10 – 75
DriveSingle reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; Split reels equipped with two, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motors
Raptor Draper Belts
Belt width and construction42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection
Belt/roller guide design V-guide on upper end of inner side of belt with V-groove in rollers
Roller design Rubber vulcanized steel drive roller, steel idler roller
Speed range ft. (m)0 - 760 (0-232)/minute
Cleat design and height in. (mm)1/2" (13) high cleat, w/embedded fiberglass reinforcement
Chaff barrier seal designContinuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard
Belt angle degrees (@minimum cutterbar tilt)15 @ 2 degrees tilt
Auger
Type-
Maximum diameter in. (mm)-
Flighting depth in. (mm)-
Conditioner (Rolls)
Type-
Length in. (m)-
Roll speed rpm-
Roll pressure-
Roll gap-
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

Haybine® 14HS

Number of discs-
Cutting width ft. in. (m)14’ 3” (4.34)
Conditioning system102” chevron intermeshing rubber or steel, or high-contact rolls
Versions available-


Standard  Optional 
Haybine® 14HS
Header drive
Cutting width ft. in. (m)14’ 3” (4.34)
Overall width ft. in. (m)16' 3" (4.95)
Approximate weight lbs. (kg)3900 (1770)
Versions available-
Windrow/swath width in. (mm)38-96 (910-2438)
Cutterbar
Cutterbar typeTimed, dual, counterstroking sickles, Open, dual, wobble drive
KnivesOver serrated, bolted knives with 2-tine, double-hardened guards
Knife speed1810 spm
Sickle stroke in. (mm)3 (76)
Flotation-
Cutting angle and height, degrees, in (m)Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5 )
Header ground clearance - bottom of skid shoes in. (mm)-
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)5-bat
Speed range rpm52-83 mechanical, 0-76 optional hydraulic drive
DriveBelt & chain
Raptor Draper Belts
Belt width and construction-
Belt/roller guide design-
Roller design-
Speed range ft. (m)-
Cleat design and height in. (mm)-
Chaff barrier seal design-
Belt angle degrees (@minimum cutterbar tilt)-
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Flighting depth in. (mm)5 (127)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm717
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop bolt
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

Haybine® 16HS

Number of discs-
Cutting width ft. in. (m)16’ 3” (4.95)
Conditioning system102” chevron intermeshing rubber or steel, or high-contact rolls
Versions available-


Standard  Optional 
Haybine® 16HS
Header drive
Cutting width ft. in. (m)16’ 3” (4.95)
Overall width ft. in. (m)18' 3" (5.56)
Approximate weight lbs. (kg)4120 (1869)
Versions available-
Windrow/swath width in. (mm)38-96 (910-2438)
Cutterbar
Cutterbar typeTimed, dual, counterstroking sickles, Open, dual, wobble drive
KnivesOver serrated, bolted knives with 2-tine, double-hardened guards
Knife speed1810 spm
Sickle stroke in. (mm)3 (76)
Flotation-
Cutting angle and height, degrees, in (m)Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5 )
Header ground clearance - bottom of skid shoes in. (mm)-
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)5-bat
Speed range rpm52-83 mechanical, 0-76 optional hydraulic drive
DriveBelt & chain
Raptor Draper Belts
Belt width and construction-
Belt/roller guide design-
Roller design-
Speed range ft. (m)-
Cleat design and height in. (mm)-
Chaff barrier seal design-
Belt angle degrees (@minimum cutterbar tilt)-
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Flighting depth in. (mm)5 (127)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm717
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop bolt
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-

Haybine® 18HS

Number of discs-
Cutting width ft. in. (m)18’ 3” (5.56)
Conditioning system102” chevron intermeshing rubber or steel, or high-contact rolls
Versions available-


Standard  Optional 
Haybine® 18HS
Header drive
Cutting width ft. in. (m)18’ 3” (5.56)
Overall width ft. in. (m)20' 3" (6.17)
Approximate weight lbs. (kg)4370 (1983)
Versions available-
Windrow/swath width in. (mm)38-96 (910-2438)
Cutterbar
Cutterbar typeTimed, dual, counterstroking sickles, Open, dual, wobble drive
KnivesOver serrated, bolted knives with 2-tine, double-hardened guards
Knife speed1810 spm
Sickle stroke in. (mm)3 (76)
Flotation-
Cutting angle and height, degrees, in (m)Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5)
Header ground clearance - bottom of skid shoes in. (mm)-
Reel
Reel Choices (SF = steel fingers, PF = plastic fingers)5-bat
Speed range rpm52-83 mechanical, 0-76 optional hydraulic drive
DriveBelt & chain
Raptor Draper Belts
Belt width and construction-
Belt/roller guide design-
Roller design-
Speed range ft. (m)-
Cleat design and height in. (mm)-
Chaff barrier seal design-
Belt angle degrees (@minimum cutterbar tilt)-
Auger
TypeFloating
Maximum diameter in. (mm)20 (508)
Flighting depth in. (mm)5 (127)
Conditioner (Rolls)
TypeChevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)102 (2.6)
Roll speed rpm717
Roll pressureTorsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gapAdjustable stop bolt
Conditioner (Flails)
Length in. (m)-
Speed rpm-
Hood position-
social stream
Top Service:


New Holland Agriculture © 2015
back to top