Haybine® Mower-Conditioners

THE ORIGINAL IS STILL THE BEST

Gallery

Promotions

True Blue Salute

In honor of the bravery, service, and sacrifice of America’s and Canada’s military and first responders, New Holland has announced the expansion of the True Blue Salute Military and First Responder incentive program. This annual program provides an exclusive, year-round equipment incentive to all current and retired United States and Canadian military personnel and first responders.

“New Holland is honored to show our appreciation and support of our military and first responders through the True Blue Salute program. It’s our way of saying thanks to the heroes in North America who serve and protect us,” says Mark Hooper, Senior Director Marketing for New Holland in North America.

Effective as of May 5, 2015, New Holland is extending a special equipment offer to active, reserve, retired military and honorably discharged veterans, and current or retired first responders, including police officers, fire fighters, and emergency medical technicians. New Holland will offer $500 off the purchase of select new New Holland tractors, light construction equipment, and hay and forage products purchased from an authorized New Holland dealer in the United States or Canada. A valid, government-issued military ID card or other proof of service is required.

For a list of eligible equipment and identification requirements, please click here.

Enter your zip or postal code below to get this offer


MODELS

472

Cutting Width7 ft., 3 in.
Conditioning Roll Length85 in.
Min. Tractor Requirement30 hp


Standard  Optional 
472
Auger
AugerNA
Floating range, in. (mm)NA
Speed, rpmNA
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm)85 (2159)
Roll diameter, in. (mm)7-3/4 (199)
Drives   Individual, #50 roller chain
Speed, rpm 818
Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)
Roll gap adjustmentShims
Material discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths
  38 and 72 (965 and 1829)
Cutterbar
CutterbarOne assembly
KnivesBolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles
GuardsTwin, forged steel, double-hardened hold-downs
Cutting height, in. (mm)1.25 to 4.25 (32 to 108)
Cutting angle, degrees-7 or -10
Hydraulic tiltNA
Guard points max lift, in. (mm)18-1/2 (470)
Skid shoes2
Sickle drivewobble joint
Sickle speed, spm1632
Sickle stroke, in. (mm)3 (76)
Cutting Width
Cutting Width, ft. in. (mm)7'3" (2210)
Dimensions
Overall width, operating, ft. in. (mm)11'11" (3632)
Overall width, transport, ft. in. (mm)10'4-3/4" (3168)
Overall length, transport, ft. in. (mm)13'1" (3988)
Overall height, operating, ft. in. (mm)3'5-3/4" (1060)
Overall height, raised, ft. in. (mm)4'8" (1422)
Drive
Drive540 rpm PTO
Hydraulic Cylinders
Hydraulic CylindersOptional header lift, Rope control
Minimum Tractor Req
Minimum Tractor Req30-hp (22.4 kw)
 One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)
Operating Speed
Operating Speed, mph (kph)up to 8 (13)
Max safe transport speed, mph (kph)25 (40)
Reel
Reel4-tine bar
Peripheral speed, mph (kph)6.2 to 8.2 (10.4 to 13.2)
Speed AdjustmentVariable sheave
Diameter (maximum), ft. in. (mm)3'6-1/4" (1073)
AdjustmentsFore/aft, vertical, pitch
Drive Belt and chain
Bushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires25 x 7.50-15 flotation
Tractor Hookup
Tractor HookupEqual-angle PTO
Weight
Weight, lbs. (kg)2110 (957)

488

Cutting Width9 ft., 3 in.
Conditioning Roll Length102 in.
Min. Tractor Requirement35 hp


Standard  Optional 
488
Auger
AugerNA
Floating range, in. (mm)NA
Speed, rpmNA
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm)102 (2591)
Roll diameter, in. (mm)10-3/8 (264)
Drives   Individual, #50 roller chain
Speed, rpm 637
Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)
Roll gap adjustmentShims
Material discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths
  38 and 96 (965 and 2438)
Cutterbar
CutterbarOne assembly
KnivesBolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles
GuardsTwin, forged steel, double-hardened hold-downs
Cutting height, in. (mm)1.25 to 4.25 (32 to 108)
Cutting angle, degrees-7 or -10
Hydraulic tiltNA
Guard points max lift, in. (mm)19 (483)
Skid shoes2
Sickle drivewobble joint
Sickle speed, spm1632
Sickle stroke, in. (mm)3 (76)
Cutting Width
Cutting Width, ft. in. (mm)9'3" (2819)
Dimensions
Overall width, operating, ft. in. (mm)13'8-1/4" (4172)
Overall width, transport, ft. in. (mm)12'2" (3708)
Overall length, transport, ft. in. (mm)13'4" (4064)
Overall height, operating, ft. in. (mm)3'6" (1067)
Overall height, raised, ft. in. (mm)5'7" (1702)
Drive
Drive540 rpm PTO
Hydraulic Cylinders
Hydraulic CylindersOptional header lift, Rope control
Minimum Tractor Req
Minimum Tractor Req35-hp (26.1 kw)
 One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)
Operating Speed
Operating Speed, mph (kph)up to 8 (13)
Max safe transport speed, mph (kph)25 (40)
Reel
Reel4-tine bar
Peripheral speed, mph (kph)6.5 to 8.6 (10.5 to 13.8)
Speed AdjustmentVariable sheave
Diameter (maximum), ft. in. (mm)3'6-1/4" (1073)
AdjustmentsFore/aft, vertical, pitch
Drive Belt and chain
Bushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires27 x 9.50-15 flotation
Tractor Hookup
Tractor HookupEqual-angle PTO
Weight
Weight, lbs. (kg)2763 (1253)

499

Cutting Width12 ft., 3 in.
Conditioning Roll Length110 in.
Min. Tractor Requirement60 hp


Standard  Optional 
499
Auger
AugerNA
Floating range, in. (mm)NA
Speed, rpmNA
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm)110 (2794)
Roll diameter, in. (mm)10-3/8 (264)
Drives   Gear/shaft
Speed, rpm 665
Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)
Roll gap adjustmentShims
Material discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths
  38 and 100 (965 and 2540)
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles
GuardsTwin, forged steel, double-hardened hold-downs
Cutting height, in. (mm)1.25 to 6.25 (32 to 159)
Cutting angle, degrees-4 to -10, mech std
Hydraulic tilt
Guard points max lift, in. (mm)19-1/2 (495)
Skid shoes2
Sickle driveenclosed gearbox
Sickle speed, spm1700
Sickle stroke, in. (mm)3 (76)
Cutting Width
Cutting Width, ft. in. (mm)12'3" (3734)
Dimensions
Overall width, operating, ft. in. (mm)19'8" (5994)
Overall width, transport, ft. in. (mm)13'9" (4191)
Overall length, transport, ft. in. (mm)21'6" (6553)
Overall height, operating, ft. in. (mm)6'2-1/2" (1892)
Overall height, raised, ft. in. (mm)6'8-1/2" (2045)
Drive
Drive540 or 1000 rpm PTO
Hydraulic Cylinders
Hydraulic CylindersStandard header lift, Standard tongue shift
Minimum Tractor Req
Minimum Tractor Req60-hp (45 kw)
 Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed
Operating Speed, mph (kph)up to 8 (13)
Max safe transport speed, mph (kph)25 (40)
Reel
ReelRolareel
Peripheral speed, mph (kph)standard: 4.8 to 7.9 (7.7 to 12.7), with reduction kit 4.0 to 6.6 (6.5 to 10.7)
Speed AdjustmentVariable sheave
Diameter (maximum), ft. in. (mm)3'7-1/2" (1105)
AdjustmentsFore/aft and vertical
Drive Belt and chain
Bushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires11L x 14 4-ply ag implement (HUT)
Tractor Hookup
Tractor HookupHydrostatic
Weight
Weight, lbs. (kg)4480 (2032)

See product brochure for full specifications and options.

social stream
Top Service:


New Holland Agriculture © 2015
back to top