H7150 Mower-Conditioner

THE ORIGINAL IS STILL THE BEST

Gallery

MODELS

H7150 14-foot

Cutting Width14 ft., 3 in.
Conditioning Roll Length102 in.
Min. Tractor Requirement70 hp


Standard  Optional 
H7150 14-foot
Auger
AugerSingle, full floating, 20-in (508 mm) auger with 5 in (178 mm) flighting
Floating range, in. (mm)2 (50.8)
Speed, rpm287
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm)102 (2591)
Roll diameter, in. (mm)10.375 (263.5)
DrivesSpur drive gearbox and PTOs
Speed, rpm 717
Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)
Roll gap adjustmentWrench
Material discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths
  38 to 96 (965 to 2438)
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable hold-dohold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, in. (mm)1.2 to 6.2 (30 to 157)
Cutting angle, degrees-6 to -12
Hydraulic tilt
Guard points max lift, in. (mm)25 (635)
Skid shoes4
Sickle driveOpen, dual wobble
Sickle speed, spm1810
Sickle stroke, in. (mm)3 (76)
Cutting Width
Cutting Width, ft. in. (mm)14'3" (4343)
Dimensions
Overall width, operating, ft. in. (mm)16'3" (4953)
Overall width, transport, ft. in. (mm)16’ 3” (4953)
Overall length, transport, ft. in. (mm)25’ 11” (7900)
Overall height, operating, ft. in. (mm)6’ 1” (1850)
Overall height, raised, ft. in. (mm)6’ 8” (2030)
Drive
Drive1000 rpm PTO
Hydraulic Cylinders
Hydraulic CylindersStandard header lift
    Standard tongue shift
Minimum Tractor Req
Minimum Tractor Req70 hp (52kw)
 Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed
Operating Speed , mph (kph)up to 8 (13)
Max safe transport speed, mph (kph)20 (32)
Reel
Reel5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, mph (kph)6.5 to 10.9 (10.46 to 17.54)
Speed AdjustmentVariable sheave
Diameter (maximum), ft. in. (mm)42” (1067)
AdjustmentsFore/aft, vertical, pitch
Drive Belt and chain
Bushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires31 x 13.50-15, 8PR agricultural Implement
   
Tractor Hookup
Tractor HookupNew patented, tongue-mounted, swiveling pump
Weight
Weight, lbs. (kg)6,825 (3096)

H7150-16-foot

Cutting Width16 ft., 3 in.
Conditioning Roll Length102 in.
Min. Tractor Requirement70 hp


Standard  Optional 
H7150-16-foot
Auger
AugerSingle, full floating, 20-in (508 mm) auger with 5 in (178 mm) flighting
Floating range, in. (mm)2 (50.8)
Speed, rpm287
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm)102 (2591)
Roll diameter, in. (mm)10.375 (263.5)
DrivesSpur drive gearbox and PTOs
Speed, rpm 717
Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)
Roll gap adjustmentWrench
Material discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths
  38 to 96 (965 to 2438)
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable hold-dohold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, in. (mm)1.2 to 6.2 (30 to 157)
Cutting angle, degrees-6 to -12
Hydraulic tilt
Guard points max lift, in. (mm)25 (635)
Skid shoes4
Sickle driveOpen, dual wobble
Sickle speed, spm1810
Sickle stroke, in. (mm)3 (76)
Cutting Width
Cutting Width, ft. in. (mm)16'3" (4953)
Dimensions
Overall width, operating, ft. in. (mm)18'3" (5563)
Overall width, transport, ft. in. (mm)18’ 3” (5563)
Overall length, transport, ft. in. (mm)25’ 11” (7900)
Overall height, operating, ft. in. (mm)6’ 1” (1850)
Overall height, raised, ft. in. (mm)6’ 8” (2030)
Drive
Drive1000 rpm PTO
Hydraulic Cylinders
Hydraulic CylindersStandard header lift
    Standard tongue shift
Minimum Tractor Req
Minimum Tractor Req70 hp (52kw)
 Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed
Operating Speed , mph (kph)up to 8 (13)
Max safe transport speed, mph (kph)20 (32)
Reel
Reel5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, mph (kph)6.5 to 10.9 (10.46 to 17.54)
Speed AdjustmentVariable sheave
Diameter (maximum), ft. in. (mm)42” (1067)
AdjustmentsFore/aft, vertical, pitch
Drive Belt and chain
Bushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires31 x 13.50-15, 8PR agricultural Implement
   
Tractor Hookup
Tractor HookupNew patented, tongue-mounted, swiveling pump
Weight
Weight, lbs. (kg)7,045 (3196)

H7150-18-foot

Cutting Width18 ft., 3 in.
Conditioning Roll Length102 in.
Min. Tractor Requirement70 hp


Standard  Optional 
H7150-18-foot
Auger
AugerSingle, full floating, 20-in (508 mm) auger with 5 in (178 mm) flighting
Floating range, in. (mm)2 (50.8)
Speed, rpm287
Conditioner
ConditionerChevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm)102 (2591)
Roll diameter, in. (mm)10.375 (263.5)
DrivesSpur drive gearbox and PTOs
Speed, rpm 717
Pressure, lbs./in. (N/mm)2 to 38 (0.3 to 6.6)
Roll gap adjustmentWrench
Material discharge, in. (mm)Adjustable gate for swath, windrow or intermediate widths
  38 to 96 (965 to 2438)
Cutterbar
CutterbarTwo opposing assemblies, timed, dual, counter-stroking sickles
KnivesBolted, over-serrated sections, adjustable hold-dohold-downs
GuardsTwin, forged steel, double-hardened
Cutting height, in. (mm)1.2 to 6.2 (30 to 157)
Cutting angle, degrees-6 to -12
Hydraulic tilt
Guard points max lift, in. (mm)25 (635)
Skid shoes4
Sickle driveOpen, dual wobble
Sickle speed, spm1810
Sickle stroke, in. (mm)3 (76)
Cutting Width
Cutting Width, ft. in. (mm)18'3" (5563)
Dimensions
Overall width, operating, ft. in. (mm)20'3" (6172)
Overall width, transport, ft. in. (mm)20’ 3” (6172)
Overall length, transport, ft. in. (mm)29’ 7” (9020)
Overall height, operating, ft. in. (mm)6’ 1” (1850)
Overall height, raised, ft. in. (mm)6’ 8” (2030)
Drive
Drive1000 rpm PTO
Hydraulic Cylinders
Hydraulic CylindersStandard header lift
    Standard tongue shift
Minimum Tractor Req
Minimum Tractor Req70 hp (52kw)
 Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed
Operating Speed , mph (kph)up to 8 (13)
Max safe transport speed, mph (kph)20 (32)
Reel
Reel5-bat, all steel, segmented tine bars and full-flex tines
Peripheral speed, mph (kph)6.5 to 10.9 (10.46 to 17.54)
Speed AdjustmentVariable sheave
Diameter (maximum), ft. in. (mm)42” (1067)
AdjustmentsFore/aft, vertical, pitch
Drive Belt and chain
Bushings/bearings, in. (mm)1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires31 x 13.50-15, 8PR agricultural Implement
   
Tractor Hookup
Tractor HookupNew patented, tongue-mounted, swiveling pump
Weight
Weight, lbs. (kg)7,345 (3332)

See product brochure for full specifications and options.

social stream
Top Service:


New Holland Agriculture © 2015
back to top