Discbine® Disc Mower-Conditioner

THE DEFINITION OF DISC MOWER-CONDITIONERS

Features

Gallery

Promotions

True Blue Salute

In honor of the bravery, service, and sacrifice of America’s and Canada’s military and first responders, New Holland has announced the expansion of the True Blue Salute Military and First Responder incentive program. This annual program provides an exclusive, year-round equipment incentive to all current and retired United States and Canadian military personnel and first responders.

“New Holland is honored to show our appreciation and support of our military and first responders through the True Blue Salute program. It’s our way of saying thanks to the heroes in North America who serve and protect us,” says Mark Hooper, Senior Director Marketing for New Holland in North America.

Effective as of May 5, 2015, New Holland is extending a special equipment offer to active, reserve, retired military and honorably discharged veterans, and current or retired first responders, including police officers, fire fighters, and emergency medical technicians. New Holland will offer $500 off the purchase of select new New Holland tractors, light construction equipment, and hay and forage products purchased from an authorized New Holland dealer in the United States or Canada. A valid, government-issued military ID card or other proof of service is required.

For a list of eligible equipment and identification requirements, please click here.

Enter your zip or postal code below to get this offer


MODELS

H7220

Number of discs7
Cutting Width9 ft., 2 in.
Conditioning SystemRubber Rolls
Tongue DesignStraight


Standard  Optional 
H7220
New Holland-Disc Cutterbar
TypeMowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m)9' 2" (2.8)
Number of discs7
Number of knives14 (2 per disc)
Disc Speed, rpm3000
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.95 to 3.2 (24 to 81)
Fixed Raised, high-stubble skid shoe 2.25-4.5 (57-114)
Adjustable Raised, high-stubble skid shoe-
BioMass skid shoe-
Ground clearance with header fully raised, in. (mm)17" (432)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System-
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
Type.Choice of molded rubber or steel rolls
Roll Length, in. (mm)90 (2286)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpm647
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner-
Number of LeaningEdge flails-
Semi-Swinging LeaningEdge flail design-
Rotor Diameter, in. (mm)-
Standard Speed, rpm-
Optional Slow Speed, rpm-
Drive.-
Conditioner Intensity Adjustment.-
Optional Textured Hood Liner Kit-
Attachment
Standard Drawbar
Drawbar Swivel Hitch-
2-pt Swivel Hitch-
Dimensions
Height, Transport, ft. in. (m)5' 8" (1.7)
Height, Operating, ft. in. (m)4' 5" (1.3)
Width, Transport, ft. in. (m)9' 11" (3.0) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m)14' 10" (4.52)
Width, Operating 2-pt Swivel Hitch, ft. in. (m)-
Width, Operating Drawbar Swivel Hitch, ft. in. (m)-
Length, Transport, Standard Drawbar Hitch, ft. in. (m)17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)-
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)-
Length, Operating, Standard Drawbar Hitch, ft. in. (m)17' 2" (5.2)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)-
Length, Operating Drawbar Swivel Hitch, ft. in. (m)-
Weight, Operating lbs. (kg)3,690 (1674)
Drive
Drive540 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionSide-Pull, Right Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltOptional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)6 (1829)
Windrow, ft. (mm)Adjustable from 3 to 6 (914 to 1829)
Wide Thin Fin Kit (100 % Coverage)
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement65 PTO hp (48 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size9.5L x 14 6PR

H7320

Number of discs7
Cutting Width9 ft., 2 in.
Conditioning SystemFlails
Tongue DesignStraight


Standard  Optional 
H7320
New Holland-Disc Cutterbar
TypeMowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m)9' 2" (2.8)
Number of discs7
Number of knives14 (2 per disc)
Disc Speed, rpm3000
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.95 to 3.2 (24 to 81)
Fixed Raised, high-stubble skid shoe 2.25-4.5 (57-114)
Adjustable Raised, high-stubble skid shoe-
BioMass skid shoe-
Ground clearance with header fully raised, in. (mm)17" (432)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System-
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner-
Type.-
Roll Length, in. (mm)-
Roll Diameter, in. (mm)-
Roll Drive-
Roll Speed, rpm-
Roll Pressure System-
Conditioner Intensity Adjustment-
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails90
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1016
Optional Slow Speed, rpm730
Drive.4 HB V-belt
Conditioner Intensity Adjustment.Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar
Drawbar Swivel Hitch-
2-pt Swivel Hitch-
Dimensions
Height, Transport, ft. in. (m)5' 8" (1.7)
Height, Operating, ft. in. (m)4' 5" (1.3)
Width, Transport, ft. in. (m)9' 11" (3.0) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m)14' 10" (4.52)
Width, Operating 2-pt Swivel Hitch, ft. in. (m)-
Width, Operating Drawbar Swivel Hitch, ft. in. (m)-
Length, Transport, Standard Drawbar Hitch, ft. in. (m)17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)-
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)-
Length, Operating, Standard Drawbar Hitch, ft. in. (m)17' 2" (5.2)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)-
Length, Operating Drawbar Swivel Hitch, ft. in. (m)-
Weight, Operating lbs. (kg)3,740 (1696)
Drive
Drive540 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionSide-Pull, Right Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltOptional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)6 (1829)
Windrow, ft. (mm)Adjustable from 3 to 6 (914 to 1829)
Wide Thin Fin Kit (100 % Coverage)
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement65 PTO hp (48 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size9.5L x 14 6PR

H7230

Number of discs8
Cutting Width10 ft., 4 in.
Conditioning SystemRubber Rolls
Tongue DesignBent


Standard  Optional 
H7230
New Holland-Disc Cutterbar
TypeMowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m)10' 4" (3.2)
Number of discs8
Number of knives16 (2 per disc)
Disc Speed, rpm3000
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.95 to 3.2 (24 to 81)
Fixed Raised, high-stubble skid shoe 2.25-4.5 (57-114)
Adjustable Raised, high-stubble skid shoe-
BioMass skid shoe-
Ground clearance with header fully raised, in. (mm)18" (457)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System-
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
Type.Choice of molded rubber or steel rolls
Roll Length, in. (mm)102 (2591)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpm635
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner-
Number of LeaningEdge flails-
Semi-Swinging LeaningEdge flail design-
Rotor Diameter, in. (mm)
Standard Speed, rpm-
Optional Slow Speed, rpm-
Drive.
Conditioner Intensity Adjustment.-
Optional Textured Hood Liner Kit-
Attachment
Standard Drawbar
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)5' 8" (1.7)
Height, Operating, ft. in. (m)4' 5" (1.3)
Width, Transport, ft. in. (m)11' 3" (3.4) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m)16' 0" (4.6)
Width, Operating 2-pt Swivel Hitch, ft. in. (m)-
Width, Operating Drawbar Swivel Hitch, ft. in. (m)-
Length, Transport, Standard Drawbar Hitch, ft. in. (m)17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)19' 9'' (6.0)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)19' 9'' (6.0)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)17' 2" (5.2)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)19' 4'' (5.9)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)19' 4'' (5.9)
Weight, Operating lbs. (kg)4,165 (1889)
Drive
Drive540 or 1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionSide-Pull, Right Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)7 (2134)
Windrow, ft. (mm)Adjustable from 3 to 7 (914 to 2134)
Wide Thin Fin Kit (100 % Coverage)
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size11L x 15 6PR

H7330

Number of discs8
Cutting Width10 ft., 4 in.
Conditioning SystemFlailss
Tongue DesignBent


Standard  Optional 
H7330
New Holland-Disc Cutterbar
TypeMowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m)10' 4" (3.2)
Number of discs8
Number of knives16 (2 per disc)
Disc Speed, rpm3000
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.95 to 3.2 (24 to 81)
Fixed Raised, high-stubble skid shoe 2.25-4.5 (57-114)
Adjustable Raised, high-stubble skid shoe-
BioMass skid shoe-
Ground clearance with header fully raised, in. (mm)17" (432)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System-
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner-
Type.-
Roll Length, in. (mm)-
Roll Diameter, in. (mm)-
Roll Drive-
Roll Speed, rpm-
Roll Pressure System-
Conditioner Intensity Adjustment-
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails100
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1000
Optional Slow Speed, rpm718
Drive.4 HB V-belt
Conditioner Intensity Adjustment.Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)5' 8" (1.7)
Height, Operating, ft. in. (m)4' 5" (1.3)
Width, Transport, ft. in. (m)11' 3" (3.4) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m)16' 0" (4.6)
Width, Operating 2-pt Swivel Hitch, ft. in. (m)-
Width, Operating Drawbar Swivel Hitch, ft. in. (m)-
Length, Transport, Standard Drawbar Hitch, ft. in. (m)17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)20' 3'' (6.2)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)20' 3'' (6.2)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)17' 8" (5.4)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)19' 10" (6.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)19' 10" (6.0)
Weight, Operating lbs. (kg)4,065 (1844)
Drive
Drive540 or 1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionSide-Pull, Right Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)7 (2134)
Windrow, ft. (mm)Adjustable from 3 to 7 (914 to 2134)
Wide Thin Fin Kit (100 % Coverage)
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size9.5L x 14 6PR

Discbine® 313 (flail)

Number of discs8
Cutting Width10 ft., 4 in.
Conditioning SystemFlailss
Tongue DesignBent


Standard  Optional 
Discbine® 313 (flail)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)13' 0" (4)
Number of discs8
Number of knives16 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
Type.Choice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive.4 HB V-belt
Conditioner Intensity Adjustment.Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)13' 4" (4.04)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)21' 3" (6.5)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)27' 5'' (8.4)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)26' 5" (8.1)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)23' 0'' (7.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)22' 0'' (6.7)
Weight, Operating lbs. (kg)6,275 (2846)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

Discbine® 313 (roll)

Number of discs8
Cutting Width13 ft., 1in.
Conditioning SystemChevron intermeshing molded rubber rolls, chevron intermeshing steel rolls
Tongue DesignCenter-pivot


Standard  Optional 
Discbine® 313 (roll)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)13' 0" (4)
Number of discs8
Number of knives16 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
Type.Choice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive.4 HB V-belt
Conditioner Intensity Adjustment.Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)13' 4" (4.04)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)21' 3" (6.5)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)27' 5'' (8.4)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)26' 5" (8.1)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)23' 0'' (7.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)22' 0'' (6.7)
Weight, Operating lbs. (kg)6,275 (2846)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

Discbine® 316 (flail)

Number of discs10
Cutting Width16 ft., 3 in.
Conditioning SystemFlail rotor with 120 tapered flails
Tongue DesignCenter-pivot


Standard  Optional 
Discbine® 316 (flail)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)16' 3'' (4.95)
Number of discs10
Number of knives20 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
Type.Choice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive.4 HB V-belt
Conditioner Intensity Adjustment.Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)16' 7" (5.05)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)25' 7" (7.8)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)32' 0'' (9.7)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)31' 0'' (9.4)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)26' 7'' (8.1)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)25' 7'' (7.8)
Weight, Operating lbs. (kg)6,700 (3039)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

Discbine® 316 (roll)

Number of discs10
Cutting Width16 ft., 3 in.
Conditioning SystemChevron intermeshing molded rubber rolls, chevron intermeshing steel rolls
Tongue DesignCenter-pivot


Standard  Optional 
Discbine® 316 (roll)
New Holland-Disc Cutterbar
TypeMowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)16' 3'' (4.95)
Number of discs10
Number of knives20 (2 per disc)
Disc Speed, rpm2,250
Cutting angle2 to 10 degrees
Hydraulic Cutting angle control
Standard Cutting height skid shoe, in. (mm) 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe 3-5.5 (76 - 140)
BioMass skid shoe 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)16.2" (411)
Cutterbar FlotationVertical and lateral, adjustable springs
QuickMax™ Knife Change System
ShockPro™ Disc Drive Hub protection system
MowMax™ 3-year cutterbar protection plan
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner
Type.Choice of molded rubber or steel rolls
Roll Length, in. (mm)125 (3175)
Roll Diameter, in. (mm)10.4 (264)
Roll Drive4 HB V-belt and enclosed gears
Roll Speed, rpmTwo-Speed: 750 or 640
Roll Pressure SystemTorsion Bar
Conditioner Intensity AdjustmentSingle crank adjustable roll pressure and two stop bolts to adjust roll gap
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner
Number of LeaningEdge flails120
Semi-Swinging LeaningEdge flail design
Rotor Diameter, in. (mm)22 (560)
Standard Speed, rpm1042
Optional Slow Speed, rpm752
Drive.4 HB V-belt
Conditioner Intensity Adjustment.Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Attachment
Standard Drawbar-
Drawbar Swivel Hitch
2-pt Swivel Hitch
Dimensions
Height, Transport, ft. in. (m)7' 5" (2.26)
Height, Operating, ft. in. (m)6' 7" (2.01)
Width, Transport, ft. in. (m)16' 7" (5.05)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)25' 7" (7.8)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)32' 0'' (9.7)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)31' 0'' (9.4)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)26' 7'' (8.1)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)25' 7'' (7.8)
Weight, Operating lbs. (kg)6,700 (3039)
Drive
Drive1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive ProtectionSlip clutch and over-running clutch
Hydraulics
Hydraulic swingStandard (double-acting cylinder)
Operating PositionCenter-Pivot, Right or Left Side
Hydraulic liftStandard (operated by two single-acting cylinders; master/slave)
Hydraulic tiltStandard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)10 (3000)
Windrow, ft. (mm)Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)-
Speeds
Operating, mph (kph)0 to 9 (0 to 14.5)
Transport, mph (kph)20 (32)
Tractor Requirement
Tractor Requirement100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar.
Hydraulic valvesAll models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size12.5L x 15 8PR

See product brochure for full specifications and options.

social stream
Top Service:


New Holland Agriculture © 2015
back to top