PT Forage Harvesters

THE BEST IN HIGH CAPACITY AND CHOP QUALITY

Promotions

0% for 60 Months OR Cash Back

 

Enter your zip or postal code below to get this offer


TECHNICAL SPECIFICATIONS

Standard Optional
Optional CropPro™ Crop Processor
 
Optional CropPro™ Crop Processor
Construction
Weight, lbs. (kg)
Roll width, in. (mm)
Roll diameter, in. (mm)
Roll gap, in. (mm)
Roll speed
790FP230FP240
N/A
-Hardened ductile iron, steel shaftHardened ductile iron, steel shaft
-490 lbs (218kg)520 lbs (231kg)
-24.5" (622.3 mm)26-7/8" (682.6 mm)
-7-7/8" (200 mm)7-7/8" (200 mm)
-3/16" to 5/8" (4.8 to 15.9 mm)3/16" to 5/8" (4.8 to 15.9 mm)
-2650 rpm upper, 2250 rpm lower2650 rpm upper, 2250 rpm lower
Specifications
 
Weight (single axle), lbs. (kg)
Length, ft. in. (m)
Height with standard spout, ft. in. (m)
Width, ft. in. (m)
Number/type of knives
Cutterhead, type/speed
Cutterhead, diameter, in. (mm)
Throat opening, in. (mm)
Shearbar
Length of cut, in. (mm)
Blower speed
Recommended max. tractor hp
Minimum power required
Knife sharpener
Recutter screens (non processor units)
Vertical wheel adjustment, in. (mm)
Tire sizes, single axle
Tire sizes, tandem axle
790FP230FP240
3104 (1411)4500 (2040)4700 (2130)
16' 1-1/4" (4.98 m)21' 6" (6.5 m)21' 6" (6.5 m)
10' 6" (3.2 m)11' 2" (3.4 m)11' 2" (3.4 m)
9' 6" (2.79 m)10' 8" (3.3 m)10' 8" (3.3 m)
12 single-edge hardened alloy12 single-edge hardened alloy12 single-edge hardened alloy
Cylinder, 850 rpmCylinder, 850 rpmCylinder, 850 rpm
19-5/16" (490.5 mm)21" (533.4 mm)21" (533.4 mm)
19" x 4-5/8" (482 mm x 117 mm)22" x 6-5/8" (558.8 mm x 167.7 mm)24-3/8" x 6-5/8" (619.76 mm x 167.6 mm)
Quick adjust, reversible, hard-faced on vertical and horizontal surfacesQuick adjust, reversible, hard-faced on vertical and horizontal surfacesQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
1/8" to 1-1/2" (3.2 mm to 38.1 mm)3/16" to 7/16" (76.2 to 177.8 mm)3/16" to 7/16" (76.2 to 177.8 mm)
1000 or 750 rpm1000 rpm1000 rpm
150 PTO hp225 PTO hp300 hp
75 PTO hp150 PTO hp180 PTO hp
2" manual, built-in3" manual, built-in3" manual, built-in
5 sizes available6 sizes available6 sizes available
4-1/2" (114 mm)6" (152 mm)6" (152 mm)
11Lx14 6PR standard, 31x13.5-156PR optional31x13.5-158PR standard, 14Lx16.1 8PR optional14Lx16.1 8PR standard
N/A11Lx15-156PR11Lx15-15 6PR

See product brochure for full specifications and options.

social stream
Top Service:


New Holland Agriculture © 2015
back to top