PT Forage Harvesters

THE BEST IN HIGH CAPACITY AND CHOP QUALITY

Promotions

0% for 48 OR Cash Back

 

Enter your zip or postal code below to get this offer


MODELS

FP230

Width10 ft., 8 in.
Length of Cut3/16 to 1 5/16 in.
Max. Tractor Requirement225 hp


Standard  Optional 
FP230
Optional CropPro™ Crop Processor
Optional CropPro™ Crop Processor
ConstructionHardened ductile iron, steel shaft
Weight, lbs. (kg)490 lbs (218kg)
Roll width, in. (mm)24.5" (622.3 mm)
Roll diameter, in. (mm)7-7/8" (200 mm)
Roll gap, in. (mm)3/16" to 5/8" (4.8 to 15.9 mm)
Roll speed2650 rpm upper, 2250 rpm lower
Specifications
Weight (single axle), lbs. (kg)4500 (2040)
Length, ft. in. (m)21' 6" (6.5 m)
Height with standard spout, ft. in. (m)11' 2" (3.4 m)
Width, ft. in. (m)10' 8" (3.3 m)
Number/type of knives12 single-edge hardened alloy
Cutterhead, type/speedCylinder, 850 rpm
Cutterhead, diameter, in. (mm)21" (533.4 mm)
Throat opening, in. (mm)22" x 6-5/8" (558.8 mm x 167.7 mm)
ShearbarQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
Length of cut, in. (mm)3/16" to 7/16" (76.2 to 177.8 mm)
Blower speed1000 rpm
Recommended max. tractor hp225 PTO hp
Minimum power required150 PTO hp
Knife sharpener3" manual, built-in
Recutter screens (non processor units)6 sizes available
Vertical wheel adjustment, in. (mm)6" (152 mm)
Tire sizes, single axle31x13.5-158PR standard, 14Lx16.1 8PR optional
Tire sizes, tandem axle11Lx15-156PR

FP240

Width10 ft., 8 in.
Length of Cut3/16 to 1 5/16 in.
Max. Tractor Requirement300 hp


Standard  Optional 
FP240
Optional CropPro™ Crop Processor
Optional CropPro™ Crop Processor
ConstructionHardened ductile iron, steel shaft
Weight, lbs. (kg)520 lbs (231kg)
Roll width, in. (mm)26-7/8" (682.6 mm)
Roll diameter, in. (mm)7-7/8" (200 mm)
Roll gap, in. (mm)3/16" to 5/8" (4.8 to 15.9 mm)
Roll speed2650 rpm upper, 2250 rpm lower
Specifications
Weight (single axle), lbs. (kg)4700 (2130)
Length, ft. in. (m)21' 6" (6.5 m)
Height with standard spout, ft. in. (m)11' 2" (3.4 m)
Width, ft. in. (m)10' 8" (3.3 m)
Number/type of knives12 single-edge hardened alloy
Cutterhead, type/speedCylinder, 850 rpm
Cutterhead, diameter, in. (mm)21" (533.4 mm)
Throat opening, in. (mm)24-3/8" x 6-5/8" (619.76 mm x 167.6 mm)
ShearbarQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
Length of cut, in. (mm)3/16" to 7/16" (76.2 to 177.8 mm)
Blower speed1000 rpm
Recommended max. tractor hp300 hp
Minimum power required180 PTO hp
Knife sharpener3" manual, built-in
Recutter screens (non processor units)6 sizes available
Vertical wheel adjustment, in. (mm)6" (152 mm)
Tire sizes, single axle14Lx16.1 8PR standard
Tire sizes, tandem axle11Lx15-15 6PR

See product brochure for full specifications and options.

social stream
Kongskilde:
Top Service:


New Holland Agriculture a brand of CNH Industrial ©
back to top