FR Forage Cruiser SP Forage Harvesters

GAME-CHANGING POWER, PERFORMANCE, COMFORT AND EFFICIENCY.

Models

FR480

Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]320/435
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]350/476
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1477 (2003)
Torque rise (2100 to 1500 rpm) %38


Standard  Optional 
FR480
Engine
EngineFPT Cursor 13*
Engine configuration and number of cylindersIn-line 6
Displacement cu. in. (L)787 (12.9)
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]320/435
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]350/476
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1073 (1455)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1450 (1966)
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1477 (2003)
Torque rise (2100 to 1500 rpm) %38
Torque rise (2100 to 1700 rpm) %35
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (L)317 (1200)
AdBlue capacity gal. (L)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll Width in. (mm)29.5 (750)
Roll diameter in. (mm)9.8 (250)
Cab Controled Gap
Standard CP
RollsSawtooth, 99/126 teeth, 30% Differential
Economy CP
RollsSawtooth, 99/99 teeth, 22% Differential
DuraCracker HDCP-
Rolls-
DuraShredder HDCP-
Rolls-
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah2 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400 rpm mph (kph)25 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area ft3 (m3)
Cab glass area ft3 (m3)240 (6.8)
Cab category level - EN 156951
LEO lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
Precision farming
Optional additive tank (with adjustable flow) capacity gal. (L)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight**** lbs. (kg)
Weight**** lbs. (kg)28,775 (13050)

FR550

Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]370/503
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]400/544
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1708 (2316)
Torque rise (2100 to 1500 rpm) %38


Standard  Optional 
FR550
Engine
EngineFPT Cursor 13*
Engine configuration and number of cylindersIn-line 6
Displacement cu. in. (L)787 (12.9)
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]370/503
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]400/544
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1241 (1682)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1657 (2247)
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1708 (2316)
Torque rise (2100 to 1500 rpm) %38
Torque rise (2100 to 1700 rpm) %34
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (L)317 (1200)
AdBlue capacity gal. (L)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll Width in. (mm)29.5 (750)
Roll diameter in. (mm)9.8 (250)
Cab Controled Gap
Standard CP
RollsSawtooth, 99/126 teeth, 30% Differential
Economy CP
RollsSawtooth, 99/99 teeth, 22% Differential
DuraCracker HDCP-
Rolls-
DuraShredder HDCP-
Rolls-
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah2 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400 rpm mph (kph)25 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area ft3 (m3)
Cab glass area ft3 (m3)240 (6.8)
Cab category level - EN 156951
LEO lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
Precision farming
Optional additive tank (with adjustable flow) capacity gal. (L)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight**** lbs. (kg)
Weight**** lbs. (kg)28,880 (13100)

FR650

Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]440/598
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]480/653
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2029 (2751)
Torque rise (2100 to 1500 rpm) %37


Standard  Optional 
FR650
Engine
EngineFPT Cursor 16*
Engine configuration and number of cylindersIn-line 6
Displacement cu. in. (L)970 (15.9)
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]440/598
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]480/653
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1476 (2001)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1988 (2696)
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2029 (2751)
Torque rise (2100 to 1500 rpm) %37
Torque rise (2100 to 1700 rpm) %35
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (L)317 (1200)
AdBlue capacity gal. (L)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll Width in. (mm)29.5 (750)
Roll diameter in. (mm)9.8 (250)
Cab Controled Gap
Standard CP
RollsSawtooth, 99/126 teeth, 30% Differential
Economy CP
Rolls
DuraCracker HDCP
RollsHD Sawteeth, 100/130 teeth, 30% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400 rpm mph (kph)25 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area ft3 (m3)
Cab glass area ft3 (m3)240 (6.8)
Cab category level - EN 156951
LEO lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
Precision farming
Optional additive tank (with adjustable flow) capacity gal. (L)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight**** lbs. (kg)
Weight**** lbs. (kg)29,875 (13550)

FR780

Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]530/721
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]570/775
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2451 (3323)
Torque rise (2100 to 1500 rpm) %38


Standard  Optional 
FR780
Engine
EngineFPT Cursor 16*
Engine configuration and number of cylindersIn-line 6
Displacement cu. in. (L)970 (15.9)
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]530/721
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]570/775
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1778 (2410)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2362 (3202)
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2451 (3323)
Torque rise (2100 to 1500 rpm) %38
Torque rise (2100 to 1700 rpm) %33
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (L)317 (1200)
AdBlue capacity gal. (L)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll Width in. (mm)29.5 (750)
Roll diameter in. (mm)9.8 (250)
Cab Controled Gap
Standard CP
RollsSawtooth, 99/126 teeth, 30% Differential
Economy CP
Rolls
DuraCracker HDCP
RollsHD Sawteeth, 100/130 teeth, 30% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400 rpm mph (kph)25 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area ft3 (m3)
Cab glass area ft3 (m3)240 (6.8)
Cab category level - EN 156951
LEO lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
Precision farming
Optional additive tank (with adjustable flow) capacity gal. (L)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight**** lbs. (kg)
Weight**** lbs. (kg)30,100 (13650)

FR850

Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]565/768
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]606/824**
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2606 (3533)
Torque rise (2100 to 1500 rpm) %38


Standard  Optional 
FR850
Engine
EngineFPT Vector 20*
Engine configuration and number of cylindersV-8
Displacement cu. in. (L)1227 (20.1)
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 2
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]565/768
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]606/824**
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1895 (2569)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2371 (3215**)
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2606 (3533)
Torque rise (2100 to 1500 rpm) %38
Torque rise (2100 to 1700 rpm) %25
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (L)370 (1400)
AdBlue capacity gal. (L)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll Width in. (mm)29.5 (750)
Roll diameter in. (mm)9.8 (250)
Cab Controled Gap
Standard CP
RollsSawtooth, 99/126 teeth, 30% Differential
Economy CP
Rolls
DuraCracker HDCP
RollsHD Sawteeth, 100/130 teeth, 30% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah4 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400 rpm mph (kph)25 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area ft3 (m3)
Cab glass area ft3 (m3)240 (6.8)
Cab category level - EN 156951
LEO lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
Precision farming
Optional additive tank (with adjustable flow) capacity gal. (L)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight**** lbs. (kg)
Weight**** lbs. (kg)30,400 (13800)

FR920

Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]610/830
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]670/911
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)3020 (4095)
Torque rise (2100 to 1500 rpm) %48


Standard  Optional 
FR920
Engine
EngineFPT V20
Engine configuration and number of cylindersV-8
Displacement cu. in. (L)1227 (20.1)
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100 rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]610/830
Max. engine power @ 1700-1900 rpm - ISO TR14396 - ECE R120 - [kW/hp(CV)]670/911
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2046 (2774)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2950 (3999)
Maximum Torque @ 1500 rpm ISO 14396 - ECE R120 ft. lbs. (Nm)3020 (4095)
Torque rise (2100 to 1500 rpm) %48
Torque rise (2100 to 1700 rpm) %44
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (L)317 (1200)
AdBlue capacity gal. (L)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm rpm1130
Cuts per minute (2x8 knives) c/min
Length of cut range (2x8 knives) in. (mm)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll Width in. (mm)29.5 (750)
Roll diameter in. (mm)9.8 (250)
Cab Controled Gap
Standard CP
Rolls
Economy CP
Rolls
DuraCracker HDCP
RollsHD Sawteeth, 100/130 teeth, 30% Differential
DuraShredder HDCP
RollsHD Sawteeth, 110/138 teeth, 40% Differential
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah4 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400 rpm mph (kph)25 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area ft3 (m3)
Cab glass area ft3 (m3)240 (6.8)
Cab category level - EN 156951
LEO lighting pack
Optimum cab noise level - ISO 5131 (dB(A))76
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
Precision farming
Optional additive tank (with adjustable flow) capacity gal. (L)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight**** lbs. (kg)
Weight**** lbs. (kg)34,800 (15800)
social stream
Kongskilde:
Top Service:


New Holland Agriculture © 2018
back to top