FR Forage Cruiser SP Forage Harvesters

POWER, PERFORMANCE, COMFORT AND EFFICIENCY.
Hotspot

MODELS

FR480

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]320/435
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]350/476
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1477 (2003)
Torque rise (2100 to 1500rpm) %38


Standard  Optional 
FR480
Engine
EngineFPT Cursor 13*
Engine configuration and number of cylindersIn-line 6
Capacity liters12.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]320/435
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]350/476
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1073 (1455)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1450 (1966)
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1477 (2003)
Torque rise (2100 to 1500rpm) %38
Torque rise (2100 to 1700rpm) %35
Approved biodiesel blend***B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)317 (1200)
AdBlue capacity gal. (l)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter in. (mm)9.8 (250)
Two-roll system with saw tooth profile teeth99 / 126 / 166
Width crop processor rolls in. (mm)29.5 (750)
10% speed differential (dia)
22% speed differential
30% speed differential always in combination with chrome coating
50% speed differential (whole crop) (dia)
Roll clearance range (electro-hydraulic adjustment) in. (mm)0.04 - 0.2 (1 - 6)
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Spout
Cropflow
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah2 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)29 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area ft³ (m³)240 (6.8)
Cab category level - EN 156951
HID lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual air-conditioning and heating
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - PLM® Connect Telematics
PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** lbs. (kg)27,668 (12550)
Dimensions
With traction wheels *****710/75R34 - 900/60R32 - 520/85R42
Turning radius ft. (m)21 (6.4)
Maximum height in transport position ft. (m)12.4 (3.77) - 12.3 (3.76) - 12.4 (3.79)
Maximum width - transport ft. (m)10.3 (3.15) - 11.3 (3.45) - 16.6 (5.06)
Wheelbase ft. (m)10.5 (3.2)
Ground clearance in. (mm)19 (500)

FR550

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]370/503
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1708 (2316)
Torque rise (2100 to 1500rpm) %38


Standard  Optional 
FR550
Engine
EngineFPT Cursor 13*
Engine configuration and number of cylindersIn-line 6
Capacity liters12.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]370/503
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1241 (1682)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1657 (2247)
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1708 (2316)
Torque rise (2100 to 1500rpm) %38
Torque rise (2100 to 1700rpm) %34
Approved biodiesel blend***B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)317 (1200)
AdBlue capacity gal. (l)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter in. (mm)9.8 (250)
Two-roll system with saw tooth profile teeth99 / 126 / 166
Width crop processor rolls in. (mm)29.5 (750)
10% speed differential (dia)
22% speed differential
30% speed differential always in combination with chrome coating
50% speed differential (whole crop) (dia)
Roll clearance range (electro-hydraulic adjustment) in. (mm)0.04 - 0.2 (1 - 6)
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Spout
Cropflow
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah2 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)29 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area ft³ (m³)240 (6.8)
Cab category level - EN 156951
HID lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual air-conditioning and heating
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - PLM® Connect Telematics
PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** lbs. (kg)28,109 (12750)
Dimensions
With traction wheels *****710/75R34 - 900/60R32 - 520/85R42
Turning radius ft. (m)21 (6.4)
Maximum height in transport position ft. (m)12.4 (3.77) - 12.3 (3.76) - 12.4 (3.79)
Maximum width - transport ft. (m)10.3 (3.15) - 11.3 (3.45) - 16.6 (5.06)
Wheelbase ft. (m)10.5 (3.2)
Ground clearance in. (mm)19 (500)

FR650

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]440/598
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2029 (2751)
Torque rise (2100 to 1500rpm) %37


Standard  Optional 
FR650
Engine
EngineFPT Cursor 16*
Engine configuration and number of cylindersIn-line 6
Capacity liters15.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]440/598
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1476 (2001)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1988 (2696)
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2029 (2751)
Torque rise (2100 to 1500rpm) %37
Torque rise (2100 to 1700rpm) %35
Approved biodiesel blend***B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)317 (1200)
AdBlue capacity gal. (l)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter in. (mm)9.8 (250)
Two-roll system with saw tooth profile teeth99 / 126 / 166
Width crop processor rolls in. (mm)29.5 (750)
10% speed differential (dia)
22% speed differential
30% speed differential always in combination with chrome coating
50% speed differential (whole crop) (dia)
Roll clearance range (electro-hydraulic adjustment) in. (mm)0.04 - 0.2 (1 - 6)
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Spout
Cropflow
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)29 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area ft³ (m³)240 (6.8)
Cab category level - EN 156951
HID lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual air-conditioning and heating
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - PLM® Connect Telematics
PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** lbs. (kg)28,131 (12760)
Dimensions
With traction wheels *****710/75R34 - 900/60R32 - 520/85R42
Turning radius ft. (m)21 (6.4)
Maximum height in transport position ft. (m)12.4 (3.77) - 12.3 (3.76) - 12.4 (3.79)
Maximum width - transport ft. (m)10.3 (3.15) - 11.3 (3.45) - 16.6 (5.06)
Wheelbase ft. (m)10.5 (3.2)
Ground clearance in. (mm)19 (500)

FR780

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]530/721
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2451 (3323)
Torque rise (2100 to 1500rpm) %38


Standard  Optional 
FR780
Engine
EngineFPT Cursor 16*
Engine configuration and number of cylindersIn-line 6
Capacity liters15.9
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]530/721
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1778 (2410)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2362 (3202)
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2451 (3323)
Torque rise (2100 to 1500rpm) %38
Torque rise (2100 to 1700rpm) %33
Approved biodiesel blend***B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)317 (1200)
AdBlue capacity gal. (l)52 (200)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter in. (mm)9.8 (250)
Two-roll system with saw tooth profile teeth99 / 126 / 166
Width crop processor rolls in. (mm)29.5 (750)
10% speed differential (dia)
22% speed differential
30% speed differential always in combination with chrome coating
50% speed differential (whole crop) (dia)
Roll clearance range (electro-hydraulic adjustment) in. (mm)0.04 - 0.2 (1 - 6)
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Spout
Cropflow
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)29 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area ft³ (m³)240 (6.8)
Cab category level - EN 156951
HID lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual air-conditioning and heating
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - PLM® Connect Telematics
PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** lbs. (kg)28,792 (13060)
Dimensions
With traction wheels *****710/75R34 - 900/60R32 - 520/85R42
Turning radius ft. (m)21 (6.4)
Maximum height in transport position ft. (m)12.4 (3.77) - 12.3 (3.76) - 12.4 (3.79)
Maximum width - transport ft. (m)10.3 (3.15) - 11.3 (3.45) - 16.6 (5.06)
Wheelbase ft. (m)10.5 (3.2)
Ground clearance in. (mm)19 (500)

FR850

Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]565/768
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]606/824**
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2606 (3533)
Torque rise (2100 to 1500rpm) %38


Standard  Optional 
FR850
Engine
EngineFPT Vector 20*
Engine configuration and number of cylindersV8
Capacity liters20.1
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 2
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]565/768
Max. engine power @ 1700-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV)]606/824**
Torque @ 2100rpm ISO 14396 - ECE R120 ft. lbs. (Nm)1895 (2569)
Torque @ 1700rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2371 (3215**)
Maximum Torque @ 1500rpm ISO 14396 - ECE R120 ft. lbs. (Nm)2606 (3533)
Torque rise (2100 to 1500rpm) %38
Torque rise (2100 to 1700rpm) %25
Approved biodiesel blend***B5
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity gal. (l)370 (1400)
AdBlue capacity gal. (l)
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls4
Feed opening width in. (mm)33.9 (860)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width in. (mm)35.4 (900)
Cutterhead cylinder width in. (mm)34.8 (884)
Cutterhead diameter (max / min) in. (mm)27.9 / 27.2 (710 / 690)
Cutterhead speed at 2100 engine rpm1130
Cuts per minute (2x8 knives) c/min9,060
Length of cut range (2x8 knives) in. (mm)0.2 - 1.3 (6 - 33)
Cuts per minute (2x10 knives) c/min11,320
Length of cut range (2x10 knives) in. (mm)0.2 - 1 (5 - 26)
Cuts per minute (2x12 knives) c/min13,600
Length of cut range (2x12 knives) in. (mm)0.2 - 0.9 (4 - 22)
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system in forward or reverse
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter in. (mm)9.8 (250)
Two-roll system with saw tooth profile teeth99 / 126 / 166
Width crop processor rolls in. (mm)29.5 (750)
10% speed differential (dia)
22% speed differential
30% speed differential always in combination with chrome coating
50% speed differential (whole crop) (dia)
Roll clearance range (electro-hydraulic adjustment) in. (mm)0.04 - 0.2 (1 - 6)
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter in. (mm)20.7 (525)
Blower rotor width in. (mm)29.5 (750)
Blower speed at 2100 engine rpm2119
Spout
Spout maximum height in. (mm)252 (6400)
Rotation angle degree210
Spout extension (10-row corn header) in. (mm)28.3 (720)
Spout extension (12-row corn header) in. (mm)54 (1380)
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Spout
Cropflow
Electrical
12 volt alternator standard Amps240
Battery capacity CCA / Ah4 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1200 rpm mph (kph)29 (40)
Header control systems
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area ft³ (m³)240 (6.8)
Cab category level - EN 156951
HID lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor’s seat
CommandGrip™ handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual air-conditioning and heating
Automatic climate control
Removable coolbox
Automatic greasing system
Rear bumper with integrated water proof storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - PLM® Connect Telematics
PLM® Connect Telematics
New Holland Precision Land Management systems - Guidance systems
IntelliSteer® system
Automatic row guidance system for corn headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity gal. (l)100 (395)
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM desktop software and software support service
Weight****
Weight**** lbs. (kg)29,233 (13260)
Dimensions
With traction wheels *****710/75R34 - 900/60R32 - 520/85R42
Turning radius ft. (m)21 (6.4)
Maximum height in transport position ft. (m)12.4 (3.77) - 12.3 (3.76) - 12.4 (3.79)
Maximum width - transport ft. (m)10.3 (3.15) - 11.3 (3.45) - 16.6 (5.06)
Wheelbase ft. (m)10.5 (3.2)
Ground clearance in. (mm)19 (500)

Standard Optional – Not available
* Developed by FPT Industrial
** Engine speed @ 1800rpm
*** Biodiesel blend must fully comply with the latest fuel specification EN14214:2009 and operation is in accordance with operator manual guidelines
**** Grass configuration
*****Traction wheels other than those mentioned are also available: 800/70R32, 800/65R32. Max width: 800/70R32 = 3,35m; 900/60R32 = 3,48m; 710/70R42 = 3.19m; 80/70R38 = 3.29m.

social stream
Kongskilde:
Top Service:


New Holland Agriculture © 2017
back to top