FR Forage Cruiser SP Forage Harvesters

POWER, PERFORMANCE, COMFORT AND EFFICIENCY.
Hotspot

Engine

POWER DESIGNED FOR CONSTANT HIGH LOADS

The NEW FR Series (except FR850) is equipped with ECOBlue™ HI-eSCR engines which are Tier 4B compliant. The FR480 and FR550 use proven FPT Cursor 13 engines similar to those used in many dependable New Holland tractors and combines. These engines, however, have been specifically tuned to the constant high loads experienced during harvesting forage, and also have almost instantaneous transient response to handle sudden changes in loads without stopping or plugging.


Read More

DIESEL OF THE YEAR

The FR650 and FR780 use the new, larger FPT Cursor 16 engine, which was recently awarded “Diesel of the Year” by Diesel Magazine. Like its smaller brother the C13, these powerful engines are tuned to be the beating heart of a very productive harvesting machine while also sipping fuel and DEF in the smallest possible quantities.


Read More

ECOBLUE HI-eSCR TECHNOLOGY FOR TIER 4B COMPLIANCE

To meet regulations, the emission controls on diesel engines must manage two separate components of the exhaust stream—particulates and nitrogen oxides (NOx). New Holland FR engines are engineered and tuned to produce very few particulates (basically unburned fuel). This leaves the emission system with one main job—clean up the NOx that is created by the high combustion temperatures.


Read More

EFFICIENT POWER TRANSFER

New Holland’s in-line concept transmits power efficiently from the engine to the driven parts, and ultimately to the cutterhead and ground. The main gearbox splits engine power two ways: to the main clutch to drive the chopping components, and to the hydraulic and hydrostatic systems. The gear driveline allows each component to turn at the most efficient RPM for best performance. In use since the original FR introduction in 2007, the gearbox has a reputation for bulletproof reliability.


Read More

DIRECT DRIVELINE EFFICIENCY

The single drive belt transmits 100% of the available power to the cutterhead, crop processor, and blower for ultimate forage chopping efficiency. The FR780 and FR850 are fitted with heavy-duty 9HB V-belt drives to transfer every last drop of performance. The main drive clutch is easily serviced, if needed, right from ground level.


Read More

DOUBLE DRIVE

This feature adds a second hydrostatic drive system that drives the header independently from the feedrolls. This arrangement allows the operator to change the header speed separately from the feedroll speed to fine-tune feeding in tough crop conditions. Double Drive is standard on FR650 through FR850 models and optional on FR480 and FR550.


Read More

AUTOMATIC WORKING MODES FOR THE HIGHEST WORK RATES

The new FR Forage Cruiser has two driving modes: Power Cruise™ and ECO engine management, which can be selected independently or used in conjunction with each other. Selection is based on crop conditions and operator preference. The renowned Power Cruise™ II system automatically adapts engine and ground speed in relation to actual load for fuel savings of up to 15%. During periods of reduced load, during headland turns for example, engine speed is reduced to improve fuel efficiency. When throughput increases, so does engine speed to maintain a higher work rate. The new ECO engine management mode benefits from two settings, a high range where engine speed can be set between 2100 to 1950 rpm, ideal for chopping hay, and a low range which spans 1850 to 1700 rpm, which is perfect when working in corn.


Read More
social stream
Kongskilde:
Top Service:


New Holland Agriculture © 2017
back to top