Pickup Heads

LEADING FROM THE FRONT

TECHNICAL SPECIFICATIONS

Standard Optional
Mainframe
 
Construction
Top beam HSS tubing, in. (mm)
Lower beam
Welded in backsheets, in. (mm)
Welded in auger floor thickness, in. (mm)
790CP - 12 Foot790CP - 15 Foot
Full welded constructionFull welded construction
6 x 6 x .125 (150 x 150 x 4)6 x 6 x .125 (150 x 150 x 4)
Fabricated trapezoid, 0.12" (3 mm)Fabricated trapezoid, 0.12" (3 mm)
(3)(3)
(4)(4)
Auger
 
Fabricated center tube, in. (mm)
Flighting depth, in. (mm)
OD, in. (mm)
Flight thickness, in. (mm)
Pitch flights, in. (mm)
Bolt on flight extensions
Sprockets
Auger fixed or allowed a 5/8" or 1.25" of float
Adjusted vertically
Adjustable timing on RH end
790CP - 12 Foot790CP - 15 Foot
16 (406) OD16 (406) OD
5 (154)5 (154)
26 (660)26 (660)
0.25 (6)0.25 (6)
24 (610)24 (610)
138 rpm standard, optional driven sprockets138 rpm standard, optional driven sprockets
Feeding
 
Full length fingers
Double V pattern retractable fingers
Steel fingers – 16mm OD
Plastic finger holders
Break groove in finger
Rubber finger retainer – patent pending
Plastic recessed finger guides
790CP - 12 Foot790CP - 15 Foot
Auger Drivers
 
RC80 chain
Driver
Auger speed, rpm
LH drive only
Drive protection
Chain tension adjustment
790CP - 12 Foot790CP - 15 Foot
13T/ 11T14T/ 12T
174 / 144187 / 160
Direct drive from feeder drive shaft to auger stub shaftDirect drive from feeder drive shaft to auger stub shaft
626 ft-lb (850 Nm) radial pin slip clutch626 ft-lb (850 Nm) radial pin slip clutch
A push plate and jam nutsA push plate and jam nuts
Dimensions
 
Overall width, in. (mm)
Fixed wheels, in. (mm)
Castor wheels, in. (mm)
Shipping weight, lbs. (kg)
790CP - 12 Foot790CP - 15 Foot
168 (4260)204 (5175)
175 (4450)211 (5365)
189 (4805)225 (5720)
3090 (1402)3180 (1442)
social stream
Top Service:


New Holland Agriculture © 2015
back to top