Pickup Heads

LEADING FROM THE FRONT

MODELS

790CP - 12 Foot

Overall width, in. (mm)168 (4260)
Fixed wheels, in. (mm)175 (4450)
Castor wheels, in. (mm)189 (4805)
Shipping weight, lbs. (kg)3090 (1402)


Standard  Optional 
790CP - 12 Foot
Mainframe
ConstructionFull welded construction
Top beam HSS tubing, in. (mm)6 x 6 x .125 (150 x 150 x 4)
Lower beamFabricated trapezoid, 0.12" (3 mm)
Welded in backsheets, in. (mm)(3)
Welded in auger floor thickness, in. (mm)(4)
Auger
Fabricated center tube, in. (mm)16 (406) OD
Flighting depth, in. (mm)5 (154)
OD, in. (mm)26 (660)
Flight thickness, in. (mm)0.25 (6)
Pitch flights, in. (mm)24 (610)
Bolt on flight extensions
Sprockets138 rpm standard, optional driven sprockets
Auger fixed or allowed a 5/8" or 1.25" of float
Adjusted vertically
Adjustable timing on RH end
Feeding
Full length fingers
Double V pattern retractable fingers
Steel fingers – 16mm OD
Plastic finger holders
Break groove in finger
Rubber finger retainer – patent pending
Plastic recessed finger guides
Auger Drivers
RC80 chain
Driver13T/ 11T
Auger speed, rpm174 / 144
LH drive onlyDirect drive from feeder drive shaft to auger stub shaft
Drive protection626 ft-lb (850 Nm) radial pin slip clutch
Chain tension adjustmentA push plate and jam nuts
Dimensions
Overall width, in. (mm)168 (4260)
Fixed wheels, in. (mm)175 (4450)
Castor wheels, in. (mm)189 (4805)
Shipping weight, lbs. (kg)3090 (1402)

790CP - 15 Foot

Overall width, in. (mm)204 (5175)
Fixed wheels, in. (mm)211 (5365)
Castor wheels, in. (mm)225 (5720)
Shipping weight, lbs. (kg)3180 (1442)


Standard  Optional 
790CP - 15 Foot
Mainframe
ConstructionFull welded construction
Top beam HSS tubing, in. (mm)6 x 6 x .125 (150 x 150 x 4)
Lower beamFabricated trapezoid, 0.12" (3 mm)
Welded in backsheets, in. (mm)(3)
Welded in auger floor thickness, in. (mm)(4)
Auger
Fabricated center tube, in. (mm)16 (406) OD
Flighting depth, in. (mm)5 (154)
OD, in. (mm)26 (660)
Flight thickness, in. (mm)0.25 (6)
Pitch flights, in. (mm)24 (610)
Bolt on flight extensions
Sprockets138 rpm standard, optional driven sprockets
Auger fixed or allowed a 5/8" or 1.25" of float
Adjusted vertically
Adjustable timing on RH end
Feeding
Full length fingers
Double V pattern retractable fingers
Steel fingers – 16mm OD
Plastic finger holders
Break groove in finger
Rubber finger retainer – patent pending
Plastic recessed finger guides
Auger Drivers
RC80 chain
Driver14T/ 12T
Auger speed, rpm187 / 160
LH drive onlyDirect drive from feeder drive shaft to auger stub shaft
Drive protection626 ft-lb (850 Nm) radial pin slip clutch
Chain tension adjustmentA push plate and jam nuts
Dimensions
Overall width, in. (mm)204 (5175)
Fixed wheels, in. (mm)211 (5365)
Castor wheels, in. (mm)225 (5720)
Shipping weight, lbs. (kg)3180 (1442)
social stream
Top Service:


New Holland Agriculture © 2015
back to top