MODELS

FR450

Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]330 / 449
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)1939
Cutterhead diameter max. (mm)710
Variflow™ systemStandard


Standard  Optional 
FR450
Engine
EngineFPT Cursor 9*
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)8700
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4A
ECOBlue™ SCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV]300/ 409
Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]330 / 449
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)1497
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)1871
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)1939
Torque rise (2100 to 1500rpm) (%)30
Torque rise (2100 to 1800rpm) (%)25
Approved biodiesel blend**B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1040
AdBlue capacity (l)150
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLoc™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900mm
Cutterhead cylinder width (mm)884mm
Cutterhead diameter (max / min) (mm)710mm / 690mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)200 / 250
Two-roll system with saw tooth profile (teeth)77 / 99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination-
Width crop processor rolls (mm)750
10% speed differential
22% speed differential
30% speed differential (only with 99/126 teeth combination)-
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)
Remote electro-hydraulic clearance control (250mm rolls)
Blower
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
Electrical
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual Air-conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including
Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight
Weight*** (kg)12550
Dimensions
With traction wheels650/75R32
Turning radius (m)6.1
Maximum height in transport position (m)3.73
Maximum width - transport (m)2.99
Wheelbase (m)3.2
Maximum ground clearance (mm)500

FR500

Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]380 / 516
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)2272
Cutterhead diameter max. (mm)710
Variflow™ systemStandard


Standard  Optional 
FR500
Engine
EngineFPT Cursor 13*
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemUnit injectors
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4A
ECOBlue™ SCR system (Selective Catalytic Reduction)
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV]350 / 475
Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]380 / 516
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)1643
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)2091
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)2272
Torque rise (2100 to 1500rpm) (%)38
Torque rise (2100 to 1800rpm) (%)27
Approved biodiesel blend**B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1040
AdBlue capacity (l)150
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860 mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLoc™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900 mm
Cutterhead cylinder width (mm)884 mm
Cutterhead diameter (max / min) (mm)710 mm / 690 mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)200 / 250
Two-roll system with saw tooth profile (teeth)77 / 99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential
22% speed differential
30% speed differential (only with 99/126 teeth combination)
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)
Remote electro-hydraulic clearance control (250mm rolls)
Blower
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
Electrical
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual Air-conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including
Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight
Weight*** (kg)12750
Dimensions
With traction wheels710/75R34
Turning radius (m)6.1
Maximum height in transport position (m)3.77
Maximum width - transport (m)3.15
Wheelbase (m)3.2
Maximum ground clearance (mm)500

FR600

Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]441 / 600
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)2590
Cutterhead diameter max. (mm)710
Variflow™ systemStandard


Standard  Optional 
FR600
Engine
EngineFPT Cursor 13 Turbo Compound*
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemUnit injectors
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 3
ECOBlue™ SCR system (Selective Catalytic Reduction)-
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV]400 / 544
Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]441 / 600
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)1941
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)2371
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)2590
Torque rise (2100 to 1500rpm) (%)33
Torque rise (2100 to 1800rpm) (%)22
Approved biodiesel blend**B100
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1220
AdBlue capacity (l)-
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860 mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLoc™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900 mm
Cutterhead cylinder width (mm)884 mm
Cutterhead diameter (max / min) (mm)710 mm / 690 mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential-
22% speed differential
30% speed differential (only with 99/126 teeth combination)
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)
Blower
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
Electrical
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual Air-conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including
Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight
Weight*** (kg)12760
Dimensions
With traction wheels900/60R32
Turning radius (m)6.1
Maximum height in transport position (m)3.76
Maximum width - transport (m)3.45
Wheelbase (m)3.2
Maximum ground clearance (mm)500

FR700

Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]504 / 685
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)2957
Cutterhead diameter max. (mm)710
Variflow™ systemStandard


Standard  Optional 
FR700
Engine
EngineCaterpillar C18
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)18100
Injection systemUnit injectors
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 3
ECOBlue™ SCR system (Selective Catalytic Reduction)-
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV]470 / 639
Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]504 / 685
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)2160
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)2698
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)2957
Torque rise (2100 to 1500rpm) (%)37
Torque rise (2100 to 1800rpm) (%)25
Approved biodiesel blend**B20
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1220
AdBlue capacity (l)-
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860 mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLoc™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900 mm
Cutterhead cylinder width (mm)884 mm
Cutterhead diameter (max / min) (mm)710 mm / 690 mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential-
22% speed differential
30% speed differential (only with 99/126 teeth combination)
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)
Blower
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
Electrical
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual Air-conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including
Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight
Weight*** (kg)13060
Dimensions
With traction wheels710/70R42
Turning radius (m)6.1
Maximum height in transport position (m)3.84
Maximum width - transport (m)3.20
Wheelbase (m)3.2
Maximum ground clearance (mm)500

FR850

Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]606 / 824
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)3584
Cutterhead diameter max. (mm)710
Variflow™ systemStandard


Standard  Optional 
FR850
Engine
EngineFPT Vector 20*
Engine configuration and number of cylindersV8
Capacity (cm³)20100
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 2
ECOBlue™ SCR system (Selective Catalytic Reduction)-
Gross engine power @ 2100rpm - ISO TR14396 - ECE R120 [kW/hp(CV]565 / 768
Max. engine power @ 1800-2000rpm - ISO TR14396 - ECE R120 [kW/hp(CV]606 / 824
Torque @ 2100rpm ISO 14396 - ECE R120 (Nm)2633
Torque @ 1800rpm ISO 14396 - ECE R120 (Nm)3219
Maximum torque @ 1500rpm ISO 14396 - ECE R120 (Nm)3584
Torque rise (2100 to 1500rpm) (%)36
Torque rise (2100 to 1800rpm) (%)22
Approved biodiesel blend**B7
Power Cruise™ II system
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1220
AdBlue capacity (l)-
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860 mm (33.86 inch)
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLoc™ active chop length control
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900 mm
Cutterhead cylinder width (mm)884 mm
Cutterhead diameter (max / min) (mm)710 mm / 690 mm
Cutterhead speed at 2100 engine (rpm)1130
Cuts per minute (2 x 6 knives) (c/min)6780
Length of cut range (2 x 6 knives) (mm)8 - 44
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential-
22% speed differential
30% speed differential (only with 99/126 teeth combination)
50% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)
Blower
Blower rotor diameter (mm)525mm (20.67 inch)
Blower rotor width (mm)750mm (29.53 inch)
Blower speed at 2100 engine (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive option
Abrasive option
Electrical
12 volt alternator Standard / Optional (Amps)185
Battery capacity (CCA / Ah)3 x 800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Mechanical powered rear wheels
Maximum road speed @ 1400rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m³)6.8
Cab category level - EN 156951
HID lighting pack
Air-suspension seat
Instructor’s seat
IntelliView™ IV monitor with adjustable position
3 viewing camera’s
Manual Air-conditioning and heating
Automatic climate control and coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems - Guidance systems
Automatic row guidance system for maize headers
IntelliFill™ system
New Holland Precision Land Management systems - Precision farming
Optional additive tank (with adjustable flow) capacity (l)400
Moisture measuring
Yield measuring and moisture measuring
Full Precision farming package including
Yield measuring and moisture measuring, DGPS yield mapping
PLM desktop software and software support service
Weight
Weight*** (kg)13260
Dimensions
With traction wheels900/60R38
Turning radius (m)6.1
Maximum height in transport position (m)3.84
Maximum width - transport (m)3.48
Wheelbase (m)3.2
Maximum ground clearance (mm)500

Standard Optional – Not available
* Developed by FPT Industrial
**Biodiesel blend must fully comply with the latest fuel specification EN14214:2009 and operation is in accordance with operator manual guidelines
***Grass configuration

social stream
Top Service:


New Holland Agriculture © 2015
back to top