FR FORAGE CRUISER

MASSIVE PERFORMANCE

MODELS

FR480

Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]350/476
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)2003
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR480
Engine*
Engine*FPT Cursor 13
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]320/435
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]350/476
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)1966
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)2003
Torque rise (2100 to 1500rpm) (%)38%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 6
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard Crop processor
Standard Crop processor
Roll diameter (mm)200 / 500
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 Teeth combination-
Width crop processor rolls (mm)750
10% speed differential
22% speed differential
30% speed differential (only with 99/126 & 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 6
Manual clearance control (optional 200mm rolls)
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)-
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)2x800 /107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6.8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13050

FR550

Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)2316
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR550
Engine*
Engine*FPT Cursor 13
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]370/503
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)2247
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)2316
Torque rise (2100 to 1500rpm) (%)38%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard Crop processor
Standard Crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 Teeth combination
Width crop processor rolls (mm)750
10% speed differential-
22% speed differential
30% speed differential (only with 99/126 & 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 6
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)-
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)2x800 /107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6.8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13100

FR650

Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)2751
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR650
Engine*
Engine*FPT Cursor 16
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]440/598
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)2696
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)2751
Torque rise (2100 to 1500rpm) (%)37%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard Crop processor
Standard Crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 Teeth combination
Width crop processor rolls (mm)750
10% speed differential-
22% speed differential
30% speed differential (only with 99/126 & 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 6
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)3x800 /107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6.8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13550

FR780

Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)3323
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR780
Engine*
Engine*FPT Cursor 16
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)15927
Injection systemCommon Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]530/721
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)3202
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)3323
Torque rise (2100 to 1500rpm) (%)38%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard Crop processor
Standard Crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 Teeth combination
Width crop processor rolls (mm)750
10% speed differential-
22% speed differential
30% speed differential (only with 99/126 & 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 6
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)3x800 /107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6.8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13650

FR920

Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]670/911**
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)4095
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR920
Engine*
Engine*FPT V20
Engine configuration and number of cylindersV8
Capacity (cm³)20100
Injection system Common Rail
Compliant with engine emissions regulations
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]610/830
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]670/911**
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)3999***
Maximum Torque (1500rpm) ISO 14396 - ECE R120 (Nm)4095
Torque rise (2100 to 1500rpm) (%)48%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)-
Length of cut range (2 x 8 knives) (mm)-
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard Crop processor
Standard Crop processor-
Roll diameter (mm)-
Two-roll system with saw tooth profile (teeth)-
Chrome coated two-roll system with 99/126 Teeth combination-
Width crop processor rolls (mm)-
10% speed differential-
22% speed differential-
30% speed differential (only with 99/126 & 126/126 teeth combination)-
60% speed differential (whole crop)-
Roll clearance range (electro-hydraulic adjustment) (mm)-
Manual clearance control (optional 200mm rolls)-
Remote electro-hydraulic clearance control (250mm rolls)-
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1 - 4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)4x800 /107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system-
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6.8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)15540

Standard Optional – Not available
* Developed by FPT Industrial
** Engine speed 1800 - 2000rpm
*** Engine speed at 1800rpm
**** Biodiesel blend must fully comply with the latest fuel specification EN14214:2009 and operation is in accordance with operator manual guidelines
***** Grass configuration

social stream
Top Service:
Twitter: @NHTopService


New Holland Agriculture a brand of CNH Industrial ©
back to top