MODELS

BigBaler 870 Standard

Bale Width / Height (cm)80 / 70
MaxiSweep™ Pick-up Width (DIN 11220) (m)1.96
Feeder2 packer forks / 6 single tines
Tying systemDouble knot type


Standard  Optional 
BigBaler 870 Standard
Bale dimensions
Width (cm)80
Height70
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]75/102
PTO speed (rpm)1000
Hydraulic remotes2
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)1.96
Roller windguard
Feed assist auger
Tine diameter (mm)5.5
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options
Knife distance (mm)
Knife removal
Knife activation, in - out
Knife protection
Feeding system
Feeder2 packer forks / 6 single tines
Feeder protectionSlip Clutch
Stufferfork type with 4 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.25
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines4
Knotter fan typeElectric
Number of Knotter fans2
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7477
Width (Single axle 600/55X22.5 tyres) (mm)2568
Width (Single axle 710/40 R22.5 tyres) (mm)2604
Width (Tandem axle 500/50X17 tyres) (mm)2398
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2562
Height (Single axle) (mm)3133
Height (Tandem axle) (mm)3133
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 870 Packer Cutter

Bale Width / Height (cm)80 / 70
MaxiSweep™ Pick-up Width (DIN 11220) (m)1.96
Feeder3 packer forks / 6 single tines
Tying systemDouble knot type


Standard  Optional 
BigBaler 870 Packer Cutter
Bale dimensions
Width (cm)80
Height70
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]80/110
PTO speed (rpm)1000
Hydraulic remotes3
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)1.96
Roller windguard
Feed assist auger
Tine diameter (mm)5.5
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options6
Knife distance (mm)114
Knife removalFrom the front
Knife activation, in - outHydraulic
Knife protectionIndividual springs
Feeding system
Feeder3 packer forks / 6 single tines
Feeder protectionSlip Clutch
Stufferfork type with 6 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.25
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines4
Knotter fan typeElectric
Number of Knotter fans2
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7477
Width (Single axle 600/55X22.5 tyres) (mm)2568
Width (Single axle 710/40 R22.5 tyres) (mm)2604
Width (Tandem axle 500/50X17 tyres) (mm)2398
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2562
Height (Single axle) (mm)3133
Height (Tandem axle) (mm)3133
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 870 CropCutter

Bale Width / Height (cm)80 / 70
MaxiSweep™ Pick-up Width (DIN 11220) (m)1.96
FeederRotor Width 800mm "W"tine configuration
Tying systemDouble knot type


Standard  Optional 
BigBaler 870 CropCutter
Bale dimensions
Width (cm)80
Height70
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]95/130
PTO speed (rpm)1000
Hydraulic remotes3
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)1.96
Roller windguard
Feed assist auger
Tine diameter (mm)6
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options9 or 19
Knife distance (mm)78 / 39
Knife removalSliding knife drawer
Knife activation, in - outHydraulic
Knife protectionIndividual springs
Feeding system
FeederRotor Width 800mm "W"tine configuration
Feeder protectionCut-out clutch
Stufferfork type with 4 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.25
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines4
Knotter fan typeElectric
Number of Knotter fans2
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7533
Width (Single axle 600/55X22.5 tyres) (mm)2568
Width (Single axle 710/40 R22.5 tyres) (mm)2604
Width (Tandem axle 500/50X17 tyres) (mm)2398
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2562
Height (Single axle) (mm)3223
Height (Tandem axle) (mm)3223
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 890 Standard

Bale Width / Height (cm)80 / 90
MaxiSweep™ Pick-up Width (DIN 11220) (m)1.96
Feeder2 packer forks / 6 single tines
Tying systemDouble knot type


Standard  Optional 
BigBaler 890 Standard
Bale dimensions
Width (cm)80
Height90
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]75/102
PTO speed (rpm)1000
Hydraulic remotes2
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)1.96
Roller windguard
Feed assist auger
Tine diameter (mm)5.5
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options
Knife distance (mm)
Knife removal
Knife activation, in - out
Knife protection
Feeding system
Feeder2 packer forks / 6 single tines
Feeder protectionSlip Clutch
Stufferfork type with 4 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.25
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines4
Knotter fan typeElectric
Number of Knotter fans2
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7477
Width (Single axle 600/55X22.5 tyres) (mm)2568
Width (Single axle 710/40 R22.5 tyres) (mm)2604
Width (Tandem axle 500/50X17 tyres) (mm)2398
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2562
Height (Single axle) (mm)3133
Height (Tandem axle) (mm)3133
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 890 Packer Cutter

Bale Width / Height (cm)80 / 90
MaxiSweep™ Pick-up Width (DIN 11220) (m)1.96
Feeder3 packer forks / 6 single tines
Tying systemDouble knot type


Standard  Optional 
BigBaler 890 Packer Cutter
Bale dimensions
Width (cm)80
Height90
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]80/110
PTO speed (rpm)1000
Hydraulic remotes3
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)1.96
Roller windguard
Feed assist auger
Tine diameter (mm)5.5
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options6
Knife distance (mm)114
Knife removalFrom the front
Knife activation, in - outHydraulic
Knife protectionIndividual springs
Feeding system
Feeder3 packer forks / 6 single tines
Feeder protectionSlip Clutch
Stufferfork type with 6 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.25
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines4
Knotter fan typeElectric
Number of Knotter fans2
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7477
Width (Single axle 600/55X22.5 tyres) (mm)2568
Width (Single axle 710/40 R22.5 tyres) (mm)2604
Width (Tandem axle 500/50X17 tyres) (mm)2398
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2562
Height (Single axle) (mm)3133
Height (Tandem axle) (mm)3133
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 890 CropCutter

Bale Width / Height (cm)80 / 90
MaxiSweep™ Pick-up Width (DIN 11220) (m)1.96
FeederRotor Width 800mm "W" tine configuration
Tying systemDouble knot type


Standard  Optional 
BigBaler 890 CropCutter
Bale dimensions
Width (cm)80
Height90
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]95/130
PTO speed (rpm)1000
Hydraulic remotes3
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)1.96
Roller windguard
Feed assist auger
Tine diameter (mm)6
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options9 or 19
Knife distance (mm)78 / 39
Knife removalSliding knife drawer
Knife activation, in - outHydraulic
Knife protectionIndividual springs
Feeding system
FeederRotor Width 800mm "W" tine configuration
Feeder protectionCut-out clutch
Stufferfork type with 4 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.25
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines4
Knotter fan typeElectric
Number of Knotter fans2
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7533
Width (Single axle 600/55X22.5 tyres) (mm)2568
Width (Single axle 710/40 R22.5 tyres) (mm)2604
Width (Tandem axle 500/50X17 tyres) (mm)2398
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2562
Height (Single axle) (mm)3223
Height (Tandem axle) (mm)3223
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 1270 Standard

Bale Width / Height (cm)120 / 70
MaxiSweep™ Pick-up Width (DIN 11220) (m)2.23
Feeder3 packer forks 9 single tines
Tying systemDouble knot type


Standard  Optional 
BigBaler 1270 Standard
Bale dimensions
Width (cm)120
Height70
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]85/114
PTO speed (rpm)1000
Hydraulic remotes2
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)2.23
Roller windguard
Feed assist auger
Tine diameter (mm)5.5
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options
Knife distance (mm)
Knife removal
Knife activation, in - out
Knife protection
Feeding system
Feeder3 packer forks 9 single tines
Feeder protectionSlip Clutch
Stufferfork type with 6 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.3
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines6
Knotter fan typeElectric
Number of Knotter fans3
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7477
Width (Single axle 600/55X22.5 tyres) (mm)2948
Width (Single axle 710/40 R22.5 tyres) (mm)2984
Width (Tandem axle 500/50X17 tyres) (mm)2782
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2946
Height (Single axle) (mm)3133
Height (Tandem axle) (mm)3133
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 1270 CropCutter

Bale Width / Height (cm)120 / 70
MaxiSweep™ Pick-up Width (DIN 11220) (m)2.35
FeederRotor Width 1200mm "W" tine configuration
Tying systemDouble knot type


Standard  Optional 
BigBaler 1270 CropCutter
Bale dimensions
Width (cm)120
Height70
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]105/141
PTO speed (rpm)1000
Hydraulic remotes3
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)2.35
Roller windguard
Feed assist auger
Tine diameter (mm)6
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options15 or 29
Knife distance (mm)78 / 39
Knife removalSliding knife drawer
Knife activation, in - outHydraulic
Knife protectionIndividual springs
Feeding system
FeederRotor Width 1200mm "W" tine configuration
Feeder protectionCut-out clutch
Stufferfork type with 6 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.3
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines6
Knotter fan typeElectric
Number of Knotter fans3
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7533
Width (Single axle 600/55X22.5 tyres) (mm)2948
Width (Single axle 710/40 R22.5 tyres) (mm)2984
Width (Tandem axle 500/50X17 tyres) (mm)2782
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2946
Height (Single axle) (mm)3223
Height (Tandem axle) (mm)3223
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 1290 Standard

Bale Width / Height (cm)120 / 90
MaxiSweep™ Pick-up Width (DIN 11220) (m)2.23
Feeder3 packer forks 9 single tines
Tying systemDouble knot type


Standard  Optional 
BigBaler 1290 Standard
Bale dimensions
Width (cm)120
Height90
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]90/122
PTO speed (rpm)1000
Hydraulic remotes2
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)2.23
Roller windguard
Feed assist auger
Tine diameter (mm)5.5
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options
Knife distance (mm)
Knife removal
Knife activation, in - out
Knife protection
Feeding system
Feeder3 packer forks 9 single tines
Feeder protectionSlip Clutch
Stufferfork type with 6 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.3
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines6
Knotter fan typeElectric
Number of Knotter fans3
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7477
Width (Single axle 600/55X22.5 tyres) (mm)2948
Width (Single axle 710/40 R22.5 tyres) (mm)2984
Width (Tandem axle 500/50X17 tyres) (mm)2782
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2946
Height (Single axle) (mm)3133
Height (Tandem axle) (mm)3133
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

BigBaler 1290 CropCutter

Bale Width / Height (cm)120 / 90
MaxiSweep™ Pick-up Width (DIN 11220) (m)2.35
FeederRotor Width 1200mm "W" tine configuration
Tying systemDouble knot type


Standard  Optional 
BigBaler 1290 CropCutter
Bale dimensions
Width (cm)120
Height90
Minimum / Maximum length (cm)100 / 260
Tractor requirements
Minimum PTO power [kW/hp(CV)]110/150
PTO speed (rpm)1000
Hydraulic remotes3
Main Drive
GearboxEnclosed oil immersed triple reduction gearbox
ProtectionShear bolt, overrunning clutch and slip clutch
MaxiSweep™ Pick-up
Width (DIN 11220) (m)2.35
Roller windguard
Feed assist auger
Tine diameter (mm)6
FlotationAdjustable spring
Hydraulic pick-up lift
Pick up slipclutch protection
Gauge wheels (15 X 6.00-6-4ply)2
CropCutter™ system
CropCutter™ system
Knives options15 or 29
Knife distance (mm)78 / 39
Knife removalSliding knife drawer
Knife activation, in - outHydraulic
Knife protectionIndividual springs
Feeding system
FeederRotor Width 1200mm "W" tine configuration
Feeder protectionCut-out clutch
Stufferfork type with 6 tines
Stuffer protectionShearbolt
Pre-compression chamber, volume (m³)0.3
SmartFill™ system
Plunger
Speed (Strokes/min)48
Length of stroke (mm)710
Tying system
TypeDouble knot type
Twine type110-150M/kg plast.
Number of twines6
Knotter fan typeElectric
Number of Knotter fans3
Knotter function alertIntelliView™ monitor and visual
Knotter lubricationGrease
Twine ball capacity32
Bale density system
Proportional 3-way controlIntelliView™ monitor controlled
Manual override
Electronic control system
ISO 11783 Connection Ready
IntelliView™ III monitor
IntelliView™ IV monitor
IntelliCruise™ system*
PLM GPS data logging
Lights
StandardTwo rear work lights, One rotary beacon, A left hand service light for the stuffer, A portable service light
OptionalTwo LED pick-up lights, A right hand service light, Two knotter lights, A precision directed needle light
Axles
Single axle (Tyre size)600/55X22.5 or 710/40X22.5
Tandem axle (Tyre size)500/50X17
Tandem axle with Auto-Steer™ system (Tyre size)500/50X17
Large wheel tandem axle with Auto-Steer™ system(Tyre size)560/45 R22.5 or 620/50 R22.5
Brakes
Hydraulic
Pneumatic
Maximum travelling speeds
Single & Tandem axle (kph)40
Large wheel tandem axle (kph)60
Baler dimensions
Length chute closed (single piece) (mm)7533
Width (Single axle 600/55X22.5 tyres) (mm)2948
Width (Single axle 710/40 R22.5 tyres) (mm)2984
Width (Tandem axle 500/50X17 tyres) (mm)2782
Width (Large wheel tandem axle 620/50 R22.5 tyres)(mm)2946
Height (Single axle) (mm)3223
Height (Tandem axle) (mm)3223
Standard equipment
Standard equipmentRoller windguard, SmartFill™ system, Automatic greasing, Standard Bale-Eject™ system, Roller bale chute with hydraulic folding, Working lights, metal tool box, rear bumper.
Optional equipment
Optional equipmentPartial bale-Eject™ system, Service lights, Camera monitoring system, ActiveWeigh™ system, Moisture measuring system

Standard Optional – Not available​

social stream
Top Service:
Twitter: @NHTopService


New Holland Agriculture © 2017
back to top