SPECIFICATIONS

​​

Standard Optional
New Holland Engine*
 
New Holland Engine*
No. of cylinders / Capacity / Valves / Emissions Level
Aspiration
Intercooler
Approved biodiesel Blend
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]
Rated Engine Speed (rpm)
Max. Torque ISO TR14396 (Nm)
Torque reserve (%)
Horizontal Exhaust
Vertical exhaust (Cab only)
Internal EGR
Cooling method
Optimum fuel Consumption (g/kWh)
Fuel tank capacity standard front axle (L)
Fuel Tank capacity SuperSteer™ front axle (L)
Service Interval (hrs)
Transmission
 
Electro hydraulic diff. lock
Mechanical diff. lock
Suspended pedals
Oil immersed braking system
16 x 16 Shuttle Command™ (30kph / 40kph)
 
16 x 16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
 
28 x 16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)
32 x 16 Spilt Command™ (30kph / 40kph)
 
32 x 16 Spilt Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h).
16 x 16 Powershuttle (30kph / 40kph)
 
16 x 16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)..
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
 
32 x 16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)…
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
 
44 x 16 Dual Command™ [Opt. Creeper (30kph / 40kph)] and parking lock
Minimum speed (With Creeper) (km/h).
Power Clutch (Dual Command™ transmission only)
Front axle
 
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle
Auto 4WD Standard / SuperSteer
Steering angle 2WD front axle (°)
Steering angle 4WD front axle (°)
Steering angle SuperSteer front axle (°)
Turn radius 2WD front axle (mm)
Turn radius 4WD front axle (mm)
Turn radius SuperSteer front axle (mm)
Dynamic fenders
Electro hydraulic diff. Lock.
Independent steering pump (28Lpm or 35.6Lpm Megaflow pump)
Front braking system
Axle oscillation (°)
Hydraulic system
 
Standard pump flow (Lpm)
Optional MegaFlow™ pump flow (Lpm)
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends)(kg)
Max. lift capacity at ball ends with arms horizontal (kg)
Rear Linkage category
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
Five mid-mount outlets (only rops)
SuperSteer™ front lift & PTO (mechanically or electronically engaged)
Max. front linkage lift capacity at ball ends (kg)
PTO
 
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
 
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab with FOPS
Cab category level - EN 15695
Air conditioning
Blue Cab with FOPS
Blue Cab category level - EN 15695
Dimensions & Weights***
 
A Wheelbase 2WD (mm)
A Wheelbase 4WD (mm)
A Wheelbase SuperSteer™ 4WD front axle (mm)
B Overall length 4WD (mm)
C Minimum overall width (mm)
D Height to top of ROPS (mm)
D Height to top of cab (mm)
E Height at centre rear axle to top of cab (mm)
F Ground clearance min (mm)
G T4N front wheel track setting 2WD (mm)
G T4N front wheel track setting 4WD (mm)
G T4N rear wheel track setting 4WD (mm)
T4N Weights**** 2WD/4WD (kg)
Max. permissible weight (kg)

Standard Optional – Not available
*Developed by FPT Industrial
**Conditions apply
***Rear Tyres T4F = 340/85R28
****With driver (85kg) and full fuel tank

social stream
Top Service:
Twitter: @NHTopService


New Holland Agriculture © 2018
back to top