पुल-टाइप फोरेज हार्वेस्टर

UNIFORM LENGTH OF CUT FOR HIGH-QUALITY FEED

A uniform length of cut not only yields high-quality feed, it makes everything easier—unloading, blowing, storing and feeding. The key to a consistent chop is smooth crop flow through the forage harvester. It’s a process New Holland has perfected.

SMOOTH FEEDING

New Holland chop quality starts with four powerdriven feedrolls that deliver material smoothly to the cutterhead for a controlled, even cut. The front feedrolls are aggressive to handle heavy materials and pull in slugs. The smaller, rear feedrolls grip the crop tightly to ensure an even, precise cut to keep cobs or long pieces of silage from getting into the wagon or truck. Spring-loaded upper feedrolls keep material compressed to reduce bunching and plugging problems, assuring consistent length of cut.

REVERSE TO CLEAR SLUGS

A special gearbox permits reversing the feedrolls and header drive to clear heavy slugs in case of overload. An electric clutch provides immediate response and positive control of the gearbox.

NO SLOWDOWN AT THE BLOWER

The large-diameter, chain-driven transfer auger rotates at 620 rpm to quickly move material to the wide transfer opening. Smooth crop flow continues at the blower. A 1000-rpm blower on the FP230 moves crop fast for increased productivity.

MORE CUT LENGTH CHOICES

New Holland forage harvesters offer the widest length of cut selections to match your exact feeding requirements. You can vary length of cut by changing feedroll speed, adding or removing knives or by using one of six optional recutter screens for non-processor machines.

FAST SHARPENING AND ADJUSTMENT

One of the reasons chop quality is the hallmark of New Holland forage harvesters is because New Holland makes knife sharpening and shearbar adjustment so easy. The built-in knife sharpener features a huge, three-inch-diameter, ratchet-advanced stone that automatically advances at the end of each stroke. The cutterhead reverses to ensure a true cutting edge on all knives. Sharp knives and the easy-to-adjust shearbar keep you chopping at peak productivity and save on tractor wear and fuel by reducing power requirements. A shearbolt protects the driveline if a foreign object hits the cutterhead.

HARDENED REVERSIBLE SHEARBAR

The New Holland shearbar is hardened on both top and side for even wear and extra-long life. And, it’s reversible, so when one side wears down, just turn it around.

UNIFORM CHOPPING WITH 12 FULL-WIDTH KNIVES

The heart of New Holland forage harvesters is the massive, 12-knife cutterhead that’s built to move more crop and chop it uniformly using full-width, spiral, hardened-alloy knives with tungsten edges. Producing high-quality feed with less power and less fuel, there’s simply no better cutterhead-and none that’s easier to sharpen.

SIMPLE CONTROL FROM YOUR SEAT

Standard electric remote controls for spout, feedrolls and attachment drives let you control all operations right from your tractor seat.

HEAVY-DUTY DRIVES

The long tongue allows for excellent maneuverability and houses heavy-duty drives and provides a “parking position” for hoses and wiring.

EXCLUSIVE FLIP-UP FEEDROLLS

Only New Holland provides flip-up feedrolls that allow you to routinely clean and inspect the shearbar and smooth roll scraper without taking them out of the machine. The upper feedroll lifts up without removing the crophead.

EASY-LIFT SHIELDING

Lightweight, hinged shielding panels lift easily, making lubrication, adjustment and inspection nearly effortless.