PULL-TYPE

THE BEST IN HIGH CAPACITY AND CHOP QUALITY

Models

FP230

Width10 ft., 8 in.
Length of Cut3/16 to 1 5/16 in.
Max. Tractor Requirement225 hp


Standard  Optional 
FP230
Specifications
Weight (single axle), lbs. (kg)4500 (2040)
Length, ft. in. (m)21' 6" (6.5)
Height with standard spout, ft. in. (m)11' 2" (3.4)
Width, ft. in. (m)10' 8" (3.3)
Number/type of knives12 single-edge hardened alloy
Cutterhead, type/speedCylinder, 850 rpm
Cutterhead, diameter, in. (mm)21 (533)
Throat opening in. x in. (mm x mm)22 x 6-5⁄8 (558 x 167)
ShearbarQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
Length of cut* in. to in. (mm to mm)3⁄16 to 7⁄16* (76 to 177)
Blower speed rpm1000 rpm
Recommended max. tractor hp PTO hp225
Minimum power required PTO hp150
Knife sharpener in. (mm)3” (76) manual, built-in
Recutter screens (non processor units)6 sizes available
Vertical wheel adjustment, in. (mm)6 (152)
Tire sizes, single axle31x13.5-15 8PR standard, 14Lx16.1 8PR optional
Tire sizes, tandem axle11Lx15-15 6PR
Optional CropPro™ Crop Processor
Optional CropPro™ Crop Processor
ConstructionHardened ductile iron, steel shaft
Weight, lbs. (kg)490 (218)
Roll width, in. (mm)24-1/2 (622)
Roll diameter, in. (mm)7-7⁄8 (200)
Roll gap, in. (mm)3⁄16 to 5⁄8 (4 to 15)
Roll speed rpm upper - rpm lower2650 rpm upper, 2250 rpm lower

FP240

Width10 ft., 8 in.
Length of Cut3/16 to 1 5/16 in.
Max. Tractor Requirement300 hp


Standard  Optional 
FP240
Specifications
Weight (single axle), lbs. (kg)4700 (2130)
Length, ft. in. (m)21' 6" (6.5)
Height with standard spout, ft. in. (m)11' 2" (3.4)
Width, ft. in. (m)10' 8" (3.3)
Number/type of knives12 single-edge hardened alloy
Cutterhead, type/speedCylinder, 850 rpm
Cutterhead, diameter, in. (mm)21" (533)
Throat opening in. x in. (mm x mm)24-3⁄8 x 6-5⁄8 (619 x 167)
ShearbarQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
Length of cut* in. to in. (mm to mm)3⁄16 to 7⁄16* (76 to 177)
Blower speed rpm1000
Recommended max. tractor hp PTO hp300
Minimum power required PTO hp180
Knife sharpener in. (mm)3” (76) manual, built-in
Recutter screens (non processor units)6 sizes available
Vertical wheel adjustment, in. (mm)6" (152)
Tire sizes, single axle14Lx16.1 8PR standard
Tire sizes, tandem axle11Lx15-15 6PR
Optional CropPro™ Crop Processor
Optional CropPro™ Crop Processor
ConstructionHardened ductile iron, steel shaft
Weight, lbs. (kg)520 (231)
Roll width, in. (mm)26-7/8 (682 mm)
Roll diameter, in. (mm)7-7/8 (200 mm)
Roll gap, in. (mm)3⁄16 to 5⁄8 (4 to 15)
Roll speed rpm upper - rpm lower2650 rpm upper, 2250 rpm lower

Standard Optional – Not available
* Longer lengths of cut can be obtained by removing knives—up to 15⁄16” length of cut with only four knives.

social stream

Find a distributor

Search Now

You are at


Let's stay in touch



New Holland Agriculture © 2017
back to top