T4 F/N/V

CLEANER, QUIETER AND EVEN MORE EFFICIENT

Gallery

SPECIFICATIONS

Standard Optional
New Holland Engine*
 
New Holland Engine*
No. of cylinders / Capacity / Valves / Emissions Level
Aspiration
Intercooler
Approved biodiesel Blend
Rated Engine Power ISO TR14396 - ECE R120 [kW/hp(CV)]
Rated Engine Speed (rpm)
Max. Torque ISO TR14396 (Nm)
Torque reserve (%)
Horizontal Exhaust
Vertical exhaust (Cab only)
External CEGR & Diesel Oxidation Catalyst (DOC)
Cooling method
Optimum fuel Consumption (g/kWh)
Fuel tank capacity (L)
Service Interval (hrs)
Transmission
 
Electro hydraulic diff. lock
Mechanical diff. lock
Suspended pedals
Oil immersed braking system
16x16 Shuttle Command™ (30kph / 40kph)
 
16x16 Shuttle Command™ (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)
28x16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
 
28x16 Shuttle Command™ [Optional Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)
16x16 Powershuttle (30kph / 40kph)
 
16x16 Powershuttle (30kph / 40kph)
Minimum speed (Without Creeper) (km/h)
32x16 Dual Command™ (30kph / 40kph) and parking lock
 
32x16 Dual Command™ (30kph / 40kph) and parking lock
Minimum speed (Without Creeper) (km/h)
44x16 Dual Command™ [Opt. Creeper (30kph / 40kph)]
 
44x16 Dual Command™ [Opt. Creeper (30kph / 40kph)]
Minimum speed (With Creeper) (km/h)
Power Clutch (Dual Command™ transmission only)
Front axle
 
2WD front axles
4WD front axles
SuperSteer™ 4WD front axle
Auto 4WD Standard / SuperSteer
Steering angle 2WD front axle (°)
Steering angle 4WD front axle (°)
Steering angle SuperSteer front axle (°)
Turn radius 2WD front axle (mm)
Turn radius 4WD front axle (mm)
Turn radius SuperSteer front axle (mm)
Dynamic fenders
Electro hydraulic diff. lock
Independent steering pump (35.6Lpm MegaFlow pump)
Front braking system
Axle oscillation (°)
Hydraulic system
 
Standard pump flow (Lpm)
Optional MegaFlow™ pump flow (Lpm)
Mechanical draft control (MDC)
Lower link draft sensing
Lift-O-Matic™ system on ROPS and Lift-O-Matic™ Plus system on CAB
Electronic draft control (EDC)
Cont. lift capacity through the range (610mm behind the ball bar ends) (kg)
Max. lift capacity at ball ends with arms horizontal (kg)
Rear Linkage category
Rear fender mounted Linkage controls (EDC only)
Width adjustable link ends
Hydraulically adjustable right hand lift rod adjustment and sway restriction
Max. no. remote outlets (Rear/Mid)
Flow control
Electrohydraulic mid mount valve with proportional joystick (only cab)
SuperSteer™ front lift & PTO
Max. front linkage lift capacity at ball ends (kg)
PTO
 
Servo-assisted engagement
Ground speed
540
540 / 540E
540 / 540E / 1000
Operator environment
 
Cab noise level - 77/311 EEC (dB(A))
Rubber isolation blocks
Lateral levers
Suspended platform (with mid mounted foldable ROPS)
Electronic instrumentation
Cab category level - EN 15695
Air conditioning
Blue Cab category level - EN 15695 standard / optional
Dimensions & Weights***
 
Wheelbase 2WD (mm)
Wheelbase 4WD (mm)
Wheelbase SuperSteer™ 4WD front axle (mm)
Overall length 4WD (mm)
Minimum overall width (mm)
Minimum height to rear ROPS (mm)
Height to top of cab (mm)
Height at centre rear axle to top of cab (mm)
Ground clearance min. (mm)
Front wheel track setting 2WD (mm)
Front wheel track setting 4WD (mm)
Rear wheel track setting 4WD (mm)
T4V Weights**** 2WD/4WD (kg)
T4N Weights**** 2WD/4WD (kg)
T4F Weights**** 4WD (kg)
Max. permissible weight (kg)

Standard Optional – Not available
* Developed by FPT Industrial
** Conditions apply
*** Rear Tyres T4F = 340/85R28, T4N = 320/85R24, T4V 280/85R28
**** With driver (85kg) and full fuel tank



New Holland Agriculture a brand of CNH Industrial N.V. ©
back to top