FR FORAGE CRUISER

MASSIVE PERFORMANCE

Features

Ultimate capacity

New Holland knows that throughput is king where forage harvesters are concerned and that owners dream in tonnes per hour.

Superior harvest quality

Patented HydroLoc™ technology guarantees constant chop length independent of throughput and crop type.

Lower operating costs

Lower operating costs mean higher profits. The FR480 to FR780 models benefit from advanced ECOBlue™ HI-eSCR technology for Tier 4B compliance which optimises your fuel consumption, saving you money.

Absolute driving pleasure

Skilled forage harvester operators are like gold dust, and when you’ve found one, you’ll want to hang onto them.

Gallery

MODELS

FR480
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]350/476
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)2003
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR480
Engine*
Engine*FPT Cursor 13
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemCommon Rail
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]320/435
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]350/476
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)1966
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)2003
Torque rise (2100 to 1500rpm) (%)38%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard crop processor
Standard crop processor
Roll diameter (mm)200 / 250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination–
Width crop processor rolls (mm)750
10% speed differential
22% speed differential
30% speed differential (only with 99/126 and 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1-4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)–
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)2x800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6,8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13050

FR550
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)2316
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR550
Engine*
Engine*FPT Cursor 13
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)12900
Injection systemCommon Rail
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]370/503
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]400/544
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)2247
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)2316
Torque rise (2100 to 1500rpm) (%)38%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard crop processor
Standard crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential–
22% speed differential
30% speed differential (only with 99/126 and 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)–
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1-4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)–
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)2x800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6,8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13100

FR650
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)2751
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR650
Engine*
Engine*FPT Cursor 16
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)15927
Injection systemCommon Rail
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]440/598
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]480/653
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)2696
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)2751
Torque rise (2100 to 1500rpm) (%)37%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard crop processor
Standard crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential–
22% speed differential
30% speed differential (only with 99/126 and 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)–
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1-4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)3x800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6,8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13550

FR780
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)3323
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR780
Engine*
Engine*FPT Cursor 16
Engine configuration and number of cylindersIn-line 6
Capacity (cm³)15927
Injection systemCommon Rail
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]530/721
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]570/775
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)3202
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)3323
Torque rise (2100 to 1500rpm) (%)38%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)9060
Length of cut range (2 x 8 knives) (mm)6 - 33
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard crop processor
Standard crop processor
Roll diameter (mm)250
Two-roll system with saw tooth profile (teeth)99 / 126 / 166
Chrome coated two-roll system with 99/126 teeth combination
Width crop processor rolls (mm)750
10% speed differential–
22% speed differential
30% speed differential (only with 99/126 and 126/126 teeth combination)
60% speed differential (whole crop)
Roll clearance range (electro-hydraulic adjustment) (mm)1-6
Manual clearance control (optional 200mm rolls)–
Remote electro-hydraulic clearance control (250mm rolls)
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1-4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)3x800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6,8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)13650

FR920
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]670/911**
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)4095
Cutterhead diameter (max / min) (mm)710 / 690
Variflow™ systemShift between crops in under two minutes


Standard  Optional 
FR920
Engine*
Engine*FPT V20
Engine configuration and number of cylindersV8
Capacity (cm³)20100
Injection systemCommon Rail
Compliant with engine emissions regulationsTier 4B / Stage 4
ECOBlue™ HI-eSCR system (Selective Catalytic Reduction)
Gross engine power (2100rpm) - ISO TR14396 - ECE R119 [kW/hp(CV)]610/830
Maximum engine power (1700-1900rpm) - ISO TR14396 - ECE R120 [kW/hp(CV)]670/911**
Torque (1700rpm) ISO 14396 - ECE R120 (Nm)3999***
Maximum torque (1500rpm) ISO 14396 - ECE R120 (Nm)4095
Torque rise (2100 to 1500rpm) (%)48%
Approved biodiesel blend****B7
Power Cruise™ II system
ECO engine management mode
Fuel consumption measuring and read-out on IntelliView™ IV monitor
Air compressor
Fuel tank
Diesel capacity (l)1200
AdBlue capacity (l)200
Feeding
FeedingHydroLoc™ drive
Length of cut adjustmentInfinite
Number of feed-rolls (n°)4
Feed opening width (mm)860
MetaLoc™ metal detection with position indication
Dual Drive system (header hydrostatic drive)
ActiveLOC™ active chop length
Cutterhead
Cutterhead cylinder typeV-shaped with 2 rows of knives
Cutterhead frame width (mm)900
Cutterhead cylinder width (mm)884
Cutterhead diameter (max / min) (mm)710 / 690
Cutterhead speed at 2100 engine rpm (rpm)1130 / 1300 (2x20 knives)
Cuts per minute (2 x 8 knives) (c/min)–
Length of cut range (2 x 8 knives) (mm)–
Cuts per minute (2 x 10 knives) (c/min)11320
Length of cut range (2 x 10 knives) (mm)5 - 26
Cuts per minute (2 x 12 knives) (c/min)13600
Length of cut range (2 x 12 knives) (mm)4 - 22
Cuts per minute (2 x 16 knives) (c/min)18100
Length of cut range (2 x 16 knives) (mm)3 - 16
Cuts per minute (2 x 20 knives) (c/min)22600
Length of cut range (2 x 20 knives) (mm)2 - 13
Adjust-O-Matic™ shearbar setting
Automatic knife sharpening system
Automatic knife sharpening system with reverse drive
Variflow™ system
Variflow™ systemShift between crops in under two minutes
Standard crop processor
Standard crop processor–
Roll diameter (mm)–
Two-roll system with saw tooth profile (teeth)–
Chrome coated two-roll system with 99/126 teeth combination–
Width crop processor rolls (mm)–
10% speed differential–
22% speed differential–
30% speed differential (only with 99/126 and 126/126 teeth combination)–
60% speed differential (whole crop)–
Roll clearance range (electro-hydraulic adjustment) (mm)–
Manual clearance control (optional 200mm rolls)–
Remote electro-hydraulic clearance control (250mm rolls)–
DuraCracker™ Heavy Duty Crop processor
DuraCracker™ Heavy Duty Crop processor
Roll diameter (mm)250
Two chrome roll system with DuraCracker™ saw tooth profile (teeth)100 / 130
Two chrome roll system with DuraShredder™ spiral cut tooth profile (teeth)110 / 138
Width crop processor rolls (mm)750
30% speed differential
40% speed differential
Roll clearance range (electro-hydraulic adjustment) (mm)1-4
Remote electro-hydraulic clearance control
Blower
Blower rotor diameter (mm)525
Blower rotor width (mm)750
Blower speed at 2100 engine rpm (rpm)2119
Spout
Spout maximum height (mm)6400
Rotation angle (°)210
Spout extension (10-row maize header) (mm)720
Spout extension (12-row maize header) (mm)1380
Automatic spout functions (home and work positions)
Spout side collision protection
Abrasive options
Abrasive options
Spout
Cropflow
Electrical
12 volt alternator Standard/Optional (Amps)240
Battery capacity (CCA / Ah)4x800 / 107
Transmission
Hydrostatic
Gearbox4-speed
Remote gearshifting
Differential lock
Standard 4WD system–
Heavy duty 4WD system with Terralock™ traction management
Maximum optional road speed @ 1200rpm (kph)40
Header control systems
Automatic stubble height control
Pressure compensation mode
Autofloat™ system
Mechanical Lateral flotation
Power Reverse™ hydraulic header reverser
Hydraulic quick coupler (single location)
Automatic header speed synchronisation to forward speed
Cab glass area
Cab glass area (m²)6,8
Cab category level - EN 156951
LED lighting pack
Standard cloth trimmed seat with air-suspension
Deluxe cloth trimmed heated air-suspension seat with Active Ventilation
Leather trimmed heated air-suspension seat with Active Ventilation
Instructor's seat
CommandGrip™ Handle
IntelliView™ IV monitor with adjustable position
Reversing camera
Manual Air-conditioning and heating
Automatic climate control
Removable Coolbox
MP3 Bluetooth radio (hands free phone calls)
Automatic greasing system
Rear bumper with integrated storage boxes
Optimum cab noise level - ISO 5131 (dB(A))76
New Holland Precision Land Management systems
PLM® Connect Telematics
Guidance systems
IntelliSteer® system
Automatic row guidance system for maize headers
IntelliFill™ system
Precision farming
Precision farming
Optional additive tank (with adjustable flow) capacity (l)390
Moisture measuring
Yield measuring and moisture measuring
Evo NIR On-board sensor
Full Precision farming package including: Yield measuring and moisture measuring, DGPS yield mapping
Full Precision farming package including: PLM® desktop software and software support service
Weight*****
Weight***** (kg)15540
Back

​ Standard Optional – Not available
* Developed by FPT Industrial
** Engine speed 1800 - 2000rpm
*** Engine speed at 1800rpm
**** Biodiesel blend must fully comply with the latest fuel specification EN14214:2009 and operation is in accordance with operator manual guidelines
***** Grass configuration


New Holland Agriculture a brand of CNH Industrial N.V. ©
back to top