PT FORAGE HARVESTERS

THE BEST IN HIGH CAPACITY AND CHOP QUALITY

MODELS

FP230

Length of Cut3/16 to 1 5/16 in.
Max. Tractor Requirement225 hp


Standard  Optional 
FP230
Specifications
Weight (single axle), kg (lbs.)2040 (4,500)
Length, m (ft. in.)6.5 (21' 6")
Height with standard spout, m (ft. in.)3.4 (11' 2")
Width, m (ft. in.)3.3 (10' 8")
Number/type of knives12 single-edge hardened alloy
Cutterhead, type/speedCylinder, 850 rpm
Cutterhead, diameter, mm (in.)533 (21)
Throat opening, mm (in.)558 x 167 (22 x 6-5⁄8)
ShearbarQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
Length of cut*, mm (in.)76 to 177 (3⁄16 to 7⁄16*)
Blower speed1,000
Recommended max. tractor kW (hp)166 (225)
Minimum power required kW (hp)100 (135)
Knife sharpener76 (3”) manual, built-in
Recutter screens (non processor units)6 sizes available
Vertical wheel adjustment, mm (in.)152 (6")
Tire sizes, single axle31x13.5-15 8PR standard/ 14Lx16.1 8PR optional
Tire sizes, tandem axle11Lx15-15 6PR
Metalert III
Optional CropPro™ crop processor
Optional CropPro™ crop processor
Construction
Weight, kg (lbs.)
Roll width, mm (in.)
Roll diameter, mm (in.)
Roll gap, mm to mm (in. to in.)
Roll speed rpm upper
Roll speed rpm lower

FP240

Length of Cut3/16 to 1 5/16 in.
Max. Tractor Requirement300 hp


Standard  Optional 
FP240
Specifications
Weight (single axle), kg (lbs.)2130 (4,700)
Length, m (ft. in.)6.5 (21' 6")
Height with standard spout, m (ft. in.)3.4 (11' 2")
Width, m (ft. in.)3.3 (10' 8")
Number/type of knives12 single-edge hardened alloy
Cutterhead, type/speedCylinder, 850 rpm
Cutterhead, diameter, mm (in.)533 (21)
Throat opening, mm (in.)619 x 167 (24-3⁄8 x 6-5⁄8)
ShearbarQuick adjust, reversible, hard-faced on vertical and horizontal surfaces
Length of cut*, mm (in.)76 to 177 (3⁄16 to 7⁄16*)
Blower speed1,000
Recommended max. tractor kW (hp)221 (300)
Minimum power required kW (hp)100 (135)
Knife sharpener76 (3”) manual, built-in
Recutter screens (non processor units)6 sizes available
Vertical wheel adjustment, mm (in.)152 (6)
Tire sizes, single axle14Lx16.1 8PR standard
Tire sizes, tandem axle11Lx15-15 6PR
Metalert III
Optional CropPro™ crop processor
Optional CropPro™ crop processor
ConstructionHardened ductile iron, steel shaft
Weight, kg (lbs.)231 (520)
Roll width, mm (in.)682 (26-7⁄8)
Roll diameter, mm (in.)200 (7-7⁄8)
Roll gap, mm to mm (in. to in.)4 to 15 (3⁄16 to 5⁄8)
Roll speed rpm upper2,650
Roll speed rpm lower2,250

Standard Optional – Not available
* Longer lengths of cut can be obtained by removing knives—up to 15⁄16” length of cut with only four knives.
A range of corn & windrow pickup fronts are available.

social stream


New Holland Agriculture © 2017
back to top