SUPERFLEX FRONTS

LEADING FROM THE FRONT

TECHNICAL SPECIFICATIONS

Standard Optional
Configuration
 
Cutting width (m/ft.)
Combine mounting
Floor
Crop Dividers
7B30FD7B35FD
9.1/ 3010.6/ 35
Mid mountMid mount
Stainless steel front floorStainless steel front floor
Fixed medium lenght crop dividers with rod endFixed medium lenght crop dividers with rod end
Header Drive
 
PTO
Electrical
7B30FD7B35FD
Double PTO shafst (with transport rest) on LHSDouble PTO shafst (with transport rest) on LHS
31 pin electrical connection31 pin electrical connection
Header Floatation
 
Automatic Header Height Control
Mode
7B30FD7B35FD
4 sensor with Terrain Tracer4 sensor with Terrain Tracer
AHHC for operation in rigid modeAHHC for operation in rigid mode
Knife
 
Drive
Sections
Protection
Speed (cpm)
Spare Knife
Position
Adjustment
Cutter Bar Suspension
7B30FD7B35FD
Two oil bath drives with rigid cutter barTwo oil bath drives with rigid cutter bar
Bolted knife sections - 75mm (3'') fine outBolted knife sections - 75mm (3'') fine out
Full width UHMW poly skid platesFull width UHMW poly skid plates
575575
StandardStandard
FixedFixed
Electro-hydraulic controlled from cabElectro-hydraulic controlled from cab
In cab controlledIn cab controlled
Table Auger
 
Diameter
Retractable Finger Pattern
Speed
Drive
7B30FD7B35FD
660mm (26'') with 127mm (5'') deep flight660mm (26'') with 127mm (5'') deep flight
Full width, spaced at 180 deg.on outer auger sections, straight in the centreFull width, spaced at 180 deg.on outer auger sections, straight in the centre
Single speed at 147 rpmSingle speed at 147 rpm
RC 60 HD chainRC 60 HD chain
Reel
 
Drive
Controls
Speed Sensor
Lift
Tine Bars
Tine Pitch
7B30FD7B35FD
Hydarulic with chain reductionHydarulic with chain reduction
Hydraulic fore/aft & height with reel resume position sensorHydraulic fore/aft & height with reel resume position sensor
StandardStandard
Reel lift with extended lift cylindersReel lift with extended lift cylinders
6 bars with plastic tines6 bars with plastic tines
Plastic reel tines with sliding cam adjustmentPlastic reel tines with sliding cam adjustment
CR/CX Adaptor Frame
 
Controls
Automatic Header Height Control
Attachment
7B30FD7B35FD
All from Combine CabAll from Combine Cab
Measured on both sides on the combineMeasured on both sides on the combine
Single lever quick attached. Single hydraulic cluster & an electrical connectionSingle lever quick attached. Single hydraulic cluster & an electrical connection
Notes
 
Weights (kg)
Warranty
7B30FD7B35FD
28803920
12 months from date of start up12 months from date of start up
social stream


New Holland Agriculture © 2017
back to top