SUPERFLEX FRONTS

LEADING FROM THE FRONT

MODELS

7B30FD

Cutting width (m/ft.)9.1/ 30
Knife Speed (cpm)575
Reel DriveHydarulic with chain reduction
Weights (kg)2880


Standard  Optional 
7B30FD
Configuration
Cutting width (m/ft.)9.1/ 30
Combine mountingMid mount
FloorStainless steel front floor
Crop DividersFixed medium lenght crop dividers with rod end
Header Drive
PTODouble PTO shafst (with transport rest) on LHS
Electrical31 pin electrical connection
Header Floatation
Automatic Header Height Control4 sensor with Terrain Tracer
ModeAHHC for operation in rigid mode
Knife
DriveTwo oil bath drives with rigid cutter bar
SectionsBolted knife sections - 75mm (3'') fine out
ProtectionFull width UHMW poly skid plates
Speed (cpm)575
Spare KnifeStandard
PositionFixed
AdjustmentElectro-hydraulic controlled from cab
Cutter Bar SuspensionIn cab controlled
Table Auger
Diameter660mm (26'') with 127mm (5'') deep flight
Retractable Finger PatternFull width, spaced at 180 deg.on outer auger sections, straight in the centre
SpeedSingle speed at 147 rpm
DriveRC 60 HD chain
Reel
DriveHydarulic with chain reduction
ControlsHydraulic fore/aft & height with reel resume position sensor
Speed SensorStandard
LiftReel lift with extended lift cylinders
Tine Bars6 bars with plastic tines
Tine PitchPlastic reel tines with sliding cam adjustment
CR/CX Adaptor Frame
ControlsAll from Combine Cab
Automatic Header Height ControlMeasured on both sides on the combine
AttachmentSingle lever quick attached. Single hydraulic cluster & an electrical connection
Notes
Weights (kg)2880
Warranty12 months from date of start up

7B35FD

Cutting width (m/ft.)10.6/ 35
Knife Speed (cpm)575
Reel DriveHydarulic with chain reduction
Weights (kg)3920


Standard  Optional 
7B35FD
Configuration
Cutting width (m/ft.)10.6/ 35
Combine mountingMid mount
FloorStainless steel front floor
Crop DividersFixed medium lenght crop dividers with rod end
Header Drive
PTODouble PTO shafst (with transport rest) on LHS
Electrical31 pin electrical connection
Header Floatation
Automatic Header Height Control4 sensor with Terrain Tracer
ModeAHHC for operation in rigid mode
Knife
DriveTwo oil bath drives with rigid cutter bar
SectionsBolted knife sections - 75mm (3'') fine out
ProtectionFull width UHMW poly skid plates
Speed (cpm)575
Spare KnifeStandard
PositionFixed
AdjustmentElectro-hydraulic controlled from cab
Cutter Bar SuspensionIn cab controlled
Table Auger
Diameter660mm (26'') with 127mm (5'') deep flight
Retractable Finger PatternFull width, spaced at 180 deg.on outer auger sections, straight in the centre
SpeedSingle speed at 147 rpm
DriveRC 60 HD chain
Reel
DriveHydarulic with chain reduction
ControlsHydraulic fore/aft & height with reel resume position sensor
Speed SensorStandard
LiftReel lift with extended lift cylinders
Tine Bars6 bars with plastic tines
Tine PitchPlastic reel tines with sliding cam adjustment
CR/CX Adaptor Frame
ControlsAll from Combine Cab
Automatic Header Height ControlMeasured on both sides on the combine
AttachmentSingle lever quick attached. Single hydraulic cluster & an electrical connection
Notes
Weights (kg)3920
Warranty12 months from date of start up
social stream


New Holland Agriculture © 2017
back to top