DISCBINE® DISC MOWER CONDITIONERS

TOUGH FIELD CONDITIONS? NO PROBLEM!

MODELS

7230

Number of discs8
Speed, rpm3000
Cutting width (mm)3160
Conditioner diameter (mm)264


Standard  Optional 
7230
MowMax™ Cutterbar with ShockPRO™ Hubs
Number of discs8
Number of knives16 (2 per disc)
Speed, rpm3000
Cutting width (mm)3160
Cutting angle (hydraulic control)2 to 10 degrees
Cutting height with standard skid shoes (mm)24 to 81
Ground clearance with header fully raised (mm)457
Flotation - Vertical and lateralAdjustable springs
Material Discharge
Swath (mm)2134
Windrow - Adjustable (mm)914 to 2134
Hydraulics
Hydraulic swing
Hydraulic lift
Hydraulic tilt
Conditioner
Chevron-design intermeshing molded rubber rolls
Flail system with 100 tapered flails
Length (mm)2591
Diameter (mm)264
Drive - 4 HB V-belt
Speed (rpm)635
Conditioner Adjustment
Single crank adjustable roll pressure & two stop bolts to adjust roll gap
Adjustable rotor hood with replaceable smooth liner
Speeds
Operating (kph)0 to 14.5
Transport (kph)32
Tubeless Ag Rib Implement Tires
Size11L x 15 6PR
Dimensions with standard drawbar hitch*
Height, Transport (m)1.7
Height, Operating (m)1.3
Width, Transport (m)3.4
Width, Operating (m)4.6
Length, Transport (m)5.3
Length, Operating5.2
Weight, Operating (kg)1889
Drive
540 rpm PTO, enclosed gears and four HB belt
1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Slip clutch and over-running clutch
Tractor Requirements
Tractor Requirement (@ PTO)60kW (80hp)
DrawbarCategory II

7330

Number of discs8
Speed, rpm3000
Cutting width (mm)3160
Conditioner diameter (mm)560


Standard  Optional 
7330
MowMax™ Cutterbar with ShockPRO™ Hubs
Number of discs8
Number of knives16 (2 per disc)
Speed, rpm3000
Cutting width (mm)3160
Cutting angle (hydraulic control)2 to 10 degrees
Cutting height with standard skid shoes (mm)24 to 81
Ground clearance with header fully raised (mm)432
Flotation - Vertical and lateralAdjustable springs
Material Discharge
Swath (mm)2134
Windrow - Adjustable (mm)914 to 2134
Hydraulics
Hydraulic swing
Hydraulic lift
Hydraulic tilt
Conditioner
Chevron-design intermeshing molded rubber rolls
Flail system with 100 tapered flails
Length (mm)2591
Diameter (mm)560
Drive - 4 HB V-belt
Speed (rpm)1000 / 718 Opt
Conditioner Adjustment
Single crank adjustable roll pressure & two stop bolts to adjust roll gap
Adjustable rotor hood with replaceable smooth liner
Speeds
Operating (kph)0 to 14.5
Transport (kph)32
Tubeless Ag Rib Implement Tires
Size9.5L x 14 6PR
Dimensions with standard drawbar hitch*
Height, Transport (m)1.7
Height, Operating (m)1.3
Width, Transport (m)3.4
Width, Operating (m)4.6
Length, Transport (m)5.3
Length, Operating5.4
Weight, Operating (kg)1844
Drive
540 rpm PTO, enclosed gears and four HB belt
1000 rpm PTO, enclosed gears and four HB belt
Drive Protection
Slip clutch and over-running clutch
Tractor Requirements
Tractor Requirement (@ PTO)60kW (80hp)
DrawbarCategory II

Standard Optional – Not available
* Rear curtain up for transport position on flail units. Windrow shields out for field and transport positions on flail and roll units.
All models require two remote hydraulic valves, 7-pin connector for transport lights.

social stream


New Holland Agriculture © 2017
back to top